Parts| Von Duprin Exit Devices

When you purchase panic and exit devices from RBA Door, every product will meet local building codes as well as your expectations for performance and quality. All panic device hardware and accessories are built with durability, convenience and value in mind. No matter the project, our panic devices are a well-built choice at a reasonable price.

Filter
View as Grid List

Items 1-36 of 199

per page
Set Descending Direction
Page
  1. Panic Hex Key 5/32" x 3-1/16" Long

    The Panic Hex Key 5/32" x 3-1/16" Long is a must for Von Duprin 22, 33, 35, 98 and 99 panic hardware.   This key has a longer shaft to reach deeper into the Von Duprin Panic Devices.   This key is also known as Hex Key, Dog Key, Allen Key,  and Dogging Key.

    88R60
  2. Von Duprin Strike 1409 Blade Stop

    The Von Duprin Strike 1409 Blade Stop is used on just about every Von Duprin Rim Device when door frame protection is needed.  We see this strike on many Narrow Stile door setups.  The strike measures 1-7/8" by 1-3/4" outside dimension. The strike has a projection of 1/2".  The strike is constructed die cast metal and the blade is made of stainless steel.

    Von Duprin Part # 1409

    1409
    $161.05
  3. Von Duprin Strike 264

    The Von Duprin Strike 264 measures 2-7/8" tall by 1-1/4" wide with a roller projection of 9/16". Used on the Von Duprin 22, 88, 98 and 99 when a lower profile strike is need in place of the Von Duprin 299 Strike. The hole spacing is 2-1/8" on center, and it ships with mounting screws and a shim. Also known as a Von Duprin Surface Roller Strike.

    Von Duprin Part # 264

    264
    $107.68
  4. Von Duprin Strike 385A

    The Von Duprin Strike 385A is used on the floor for the Von Duprin 2227, 8827, 9827 and 9927 Surface Vertical Rods. Von Duprin recommends this strike if you are mounting the bottom strike in wood.  The strike face plate outside dimensions are 2-1/4" x 2-1/4" with an inside dimension of 1-1/8" by 1". This floor strike features a bolt that can be cemented into the floor.  This is an optional strike when added security is needed.  Zinc plated finish.

    385A
    $123.48
  5. Von Duprin Strike 1609

    The Von Duprin Strike 1609 strike is used when we have a double door application without a center post. By using this strike we can have one door with a surface vertical rod and one door a rim device, which will save money because vertical rods are usually expensive. This strike can be used with the Von Duprin 22/2227, 88/8827, 98/9827 and 99/9927 combinations. The strike base measures 1-1/16" wide by 3-1/4" high, the lip projects out 7/8". The three slots are 1-1/4" on center. This strike ships with the mounting screws.   This Strike is not rated for Fire Doors, which are usually interior corridor doors.

    Von Duprin Part # US19-Black finish

    1609
    $104.38
  6. Von Duprin Strike 299

    The Von Duprin Strike 299 is used on the 22, 88, 98, and 99 Rim Devices and also as a Top Strike on the 2227, 8827, 9927, and 9827 Surface Vertical Rod Panic Devices. The 299 strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16".  Ships with shim and mounting screws.

    299
    $65.95
  7. Von Duprin Strike 299F

    The Von Duprin Strike 299F is used on the 22, 88, 98, and 99 Fire Rated Rim Devices (no hex or cylinder dogging). The 299F strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16". The non fire rated version would be the Von Duprin Strike 299.  Ships with shim and mounting screws.

    Von Duprin Part # 299F

    299F
    $82.02
  8. Von Duprin Strike 304L Bottom Strike

    This Von Duprin Strike 304L Bottom Strike is used for the bottom latch of the 2227, 8827, 9827 and 9927. The strike measures 1-7/8" by 1-7/8" out dimension of the square flange, with an inside dimension of 1-1/8" by 1-1/8". The part that is inserted into the floor is 1-5/16" x 1-5/16" and drops down 13/16". Also known as a Von Duprin Floor Mounted Mortise Strike.

    Von Duprin Part # 304L

    304L
    $58.16
  9. Von Duprin 88 Active Case 050409

    The Von Duprin 88 Active Case 050409 is for use with the Rim Device, which is the model that has the latch bolt sticking out the side of the housing.  This version of the housing is for use on the 88EO (Exit Only), 88DT (Dummy Trim) and 88NL (Night Latch) models only.  Call or email if you need the Thumb Piece, Knob or Lever Version.  The Center Case includes all of the internal workings.

    Von Duprin Part # 050409
    Old Part # 101662

    Plated Door Finishes

    88R10
    As low as $721.13
  10. Von Duprin 88 and 55 Wedge Tite Screw 090081

    The Von Duprin 88 and 55 Wedge Tite Screw 090081 is used on the 55 and 88 panic hardware.  This screw applies pressure to the wedge which then expands the wedge ring to key the Von Duprin 88 and 55's crossbars tite.  The screw is a 5/16-18 x 5/8 hollow set point.

    Von Duprin Part # 090081

    88R100
    $2.30
  11. Von Duprin 88 Tube Attaching Ring 090021

    The Von Duprin 88 Tube Attaching Ring 090021 is also used on the Von Duprin 55.  The ring fits over the device lever arm, and is expanded by the Wedge (88R90) and the Wedge Tite Screw (88R100).  When the Wedge Tite Screw is tightened the Ring expands and keeps the crossbar parallel to the door.  Measures 15/16" long by 13/16" diameter.

    Von Duprin Part #090021
    Old Part # 965676

    88R110
    $11.27
  12. Von Duprin 88 and 55 Cross Bar 967738

    The Von Duprin 88 and 55 Cross Bar 967738 has been in use since the 1950's.  The bar is 1" in diameter and is 42" long and can be cut down in the field.  One side of the bar will be cut for the wedge tite screw opening.

    Von Duprin Part # 050004
    Old Part # 967738

    Plated Door Finishes

    88R120-
    As low as $240.25
  13. Von Duprin 88 Latch Tail Springs (2) 050393

    Von Duprin 88 Latch Tail Springs

    This is the spring that pushes the latch bolt out. Used on all Von Duprin 88 Rim Devices. The spring measures 2-5/8" long by 3/16" diameter.

    Sold in packages of 2.

    Von Duprin Part #050393

    88R130
    $12.27
  14. Von Duprin 88 Hinge Case Spring 090080

    Von Duprin 88 Hinge Case Spring

    Used on all Von Duprin 88, 8847, 8827 and 8827 Exit Devices. 4-1/2" long x 5/16" diameter.

    Von Duprin Part # 090080

    88R140
    $7.68
  15. Von Duprin 88 End Case 050435

    The Von Duprin 88 End Case 050435 is also known as the hinge case, meaning it is on the hinge side of the door.   This End Cap is used on all of the Von Duprin 88 models, which include 88, 8827, 8847 and 8875.   This piece does all the lifting of the cross bar, so it is an important component.  The case includes the all of the internal workings and springs.

    Von Dupin Part # 050435

    Plated Door Finishes

    88R20
    As low as $240.25
  16. Von Duprin 88 Spring Tube Bracket 050477

    Von Duprin 88 Spring Tube Bracket

    This bracket holds the hinge case spring tube in place. The screws are included with the bracket.

    Von Duprin Part # 050477
    Old Part # 969369

    88R210
    $16.57
  17. Von Duprin 88 Spring Stop Assembly 050451

    The Von Duprin 88 Spring Stop Assembly 050451 is the piece that holds the hinge case spring in place. It is used on all of the Von Duprin 88 models.

    Von Duprin Part # 050451
    Old Part #107682

    88R220
    $21.61
  18. Von Duprin 88 Master Cam 050501

    Von Duprin 88 Master Cam

    This is inside the Von Duprin 88 Rim Device and is the piece that the key cylinder moves to lock and unlock the exit device.

    Von Durprin part # 050501
    Old Part # 951960

    88R230
    $38.36
  19. Von Duprin Panic Device 88 Mounting Screws

    The Von Duprin Panic Device 88 Mounting Screws are used on the 88 Exit Device, there description is 88C/C or E/C Mtg Pkg (CS and MS). The package included 12 screws, 6 machine and 6 hybrid.

    Von Duprin Part # 900503
    .

    88R30
    $19.96
  20. Von Duprin 88 Axle Package 090006 090082

    Von Duprin Exit Device 88 Axle Package

    Von Duprin 88 Axle Package

    New style axle snaps together, and replaces the old style which were screwed together with allen wrenches. This style of axle has been around since about 1990. The piece on the right is only used for taking the axle apart.

    Von Duprin Part # 090006 or 090082

    88R40
  21. Von Duprin 88 Dog Screw 090083

    Von Duprin 88 Dog Screw. Newer style, after 1975 or so. If you have an older exit device they no longer make that screw.  I would recommend the D100, Panic Bar Retainer, for dogging down your device.

    Von Duprin 88 dog screw 14 threads per inch

    Von Duprin Part # 090083

    88R50
    $9.21
  22. Von Duprin 88 Lever Arm Left Hand 050439

    The Von Duprin 88 Lever Arm Left Hand 050439 replacement lever arm for all the Von Duprin 88 exit devices. Usually replaced due to the dogging screw stripping out.  The arm includes the Wedge, Wedge Ring, Wedge Tite Screw and Dog Screw, and sometimes the axle.

    Von Dupin part # 050439
    Old Part # 100729

    Plated Door Finishes

    88R70-
    As low as $236.10
  23. Von Duprin 88 Lever Arm Right Hand 050438

    The Von Duprin 88 Lever Arm Right Hand 050438 replacement lever arm for all the Von Duprin 88 exit devices. Usually replaced due to the dogging screw stripping out.  The arm includes the Wedge, Wedge Ring, Wedge Tite Screw and Dog Screw, and sometimes the axle.

    Von Dupin part # 050439
    Old Part # 100729

    Plated Door Finishes

    88R80-
    As low as $236.10
  24. Von Duprin 88 Wedge Ring 090020

    The Von Duprin 88 Wedge Ring 090020 is also used on the Von Duprin 55's.  The Wedge Tite Screw applies pressure on the Wedge which expands the Tube Attaching Ring to grip the Cross Bar. Measures 5/8" on the flat edge.

    Von Duprin Part # 090020
    Old Part # 956520

    88R90
    $6.98
  25. Von Duprin 8827 Top Latch Case 050460

    The Von Duprin 8827 Top Latch Case 050460 is for non fire rated doors. A non fire rated device is one that has to positively latch every time it closes, you can usually tell, because a non fire rated device has the hex key dogging.  This is the part that may be causing your bottom latch to drag on the floor. The Top Latch does all the work on the Von Duprin 8827. When the Top Latch is retracted, it holds the rods in the retracted position.

    Von Duprin part # 050460
    Old Part # 101750

    88VR10
    $211.68
  26. Von Duprin Panic Device 8827 Center Case 050415

    The Von Duprin Panic Device 8827 Center Case 050415 is for use on the non fire rated 88 surface vertical rod.   You can tell the difference by the dogging screw.  If you have a Dogging Screw on your device, then this is the correct part.  Includes the internal pieces, including the Rod Control.

    Von Duprin part # 050415

    Plated Door Finishes

    88VR120-
    As low as $444.50
  27. Von Duprin 8827 Bottom Vertical Rod Assembly 050455

    Von Duprin 8827 Bottom Vertical Rod Assembly

    This bottom vertical rod is used on non fire rated doors. The rod includes the bottom rod connector.

    Von Duprin Part #050455
    Old Part #101777 and 103234

    Plated Door Finishes

    88VR150-
    As low as $140.02
  28. Von Duprin 8827 Bottom Rod Connector 050327

    Von Duprin 8827 Bottom Rod Connector.

    Connects bottom rod to the bottom latch. The Bottom Rod Connector is included with the Von Durpin Bottom Rod.

    Von Duprin Part # 050327
    Old Part #960578

    88VR160
    $21.83
  29. Von Duprin 8827 Bottom Latch Case 050461

    The Von Duprin 8827 Bottom Latch Case 050461 is used on all Von Duprin 8827 non fire rated exits.  A non fire rated device is one that has to positively latch every time it closes, you can usually tell, because a non fire rated device has the hex key dogging.  Included mounting screws.

    Von Duprin Part # 050461
    Old part # 101751

    88VR170
    $211.68
  30. Von Duprin 8827 Latch Covers 050464

    The Von Duprin 8827 Latch Covers 050464 is used on the top and bottom latches of the 8827 Panic Hardware, and the bottom latch of the 8827-F Fire Rated Hardware.  Latch covers come with matching screws

    Von Duprin Part # 050464
    Old Part # 960548

    Plated Door Finishes

    88VR30-
    As low as $96.62
  31. Von Duprin 8827 Top Rod Connector 960577

    Von Duprin 8827 Top Rod Connector

    Inserts into rod so the latch can connect to the rod. The top vertical rod does not ship with the top rod connector!

    Von Duprin Part # 050279
    Old Part # 960577

    88VR50
    $22.63
  32. Von Duprin 8827 Rod Guide Assembly 050482

    Von Duprin 8827 Rod Guide Assembly

    Securely holds rod in place and protects rod from bending.

    Von Duprin Part # 050482
    Old Part # 101648

    Plated Door Finishes

    88VR80-
    As low as $100.50
  33. Von Duprin 22, 33, And 99 Dogging Shaft 090040

    The Von Duprin 22, 33, And 99 Dogging Shaft 090040 is the peice that the hex dogging key would fit into. The shaft is for a 5/32" dog key, but it has to be the long version.   The shorter versions will not have enough reach to get all the way into the shaft.  This is a very common problem area, the hole that the key fits in is only about 1/4" deep, and if you do not push down on the hex key when locking it open it will round out over time.  To remove the shaft, just pull it straight out with a part of channel locks.   We reinstalling the new one you might have to bend the ends of the adapter spring 090042 back down. This dogging shaft is for use on all Von Duprin Panic Exit Devices shipped after 1997.

    G090040
    $10.75
  34. Von Duprin Dogging Spring 090041

    The Von Duprin Dogging Spring 090041 is the spring that activates the Dogging Hook # 090044.  These do occasionally fail, we sell them individually.  It is # 3 on the diagram.

    G090041
    $12.13
  35. Von Duprin Dogging Adapter Spring 090042

    The Von Duprin Dogging Adapter Spring 090042 is the clip that holds the dogging shaft in the assembly.  We sell these individually, and it is the #2 item on the diagram.

    G090042
    $10.75
View as Grid List

Items 1-36 of 199

per page
Set Descending Direction
Page