Search results for: 'AUTOMATIC DOOR'
- Related search terms
- door series 30 push bar panic exit deg parts 1306
- door series 30 partpush bar panic exit dor parts 1298
- door series 30 push bar panic exit dog parts 1307
- door series 30 push bar panic exit deiv parts 1306
- door series 30 push bar panic exit devic parts 1304
- door series 30 push bar panic exit drill parts 1297
- door series 30 push bar panic exit dent parts 1305
- door series 30 push bar panic exit deep parts 1309
- door series 30 push bar panic exit de99 parts 1306
- door series 30 push bar panic exit detex parts 1307
-
Ives FB31P Automatic Flush Bolt
Ives FB31P Automatic Flush Bolt
This fully automatic flush bolt is used on the inactive metal fire door. When the active door is opened the latches retract, when the active door closes the latches extend. The Ives FB31P Body is 1” wide by 6-3/4” long and 2” deep. Bolt throw is 3/4” with a 7/8” adjustment with a 3/4” backset, standard rod is 12” which is measured from the center of latch body to the bolt tip.
Rods are also available in 18”, 24” and 36”, call for pricing. We ship the 12” rods, and this set includes the top and bottom flush bolts.
3 Hour UL listed
Ives Part # FB31P
FB31P- -
Ives FB40 Automatic Flush Bolt
Wood Door Automatic Flush Bolt FB40
H.B. Ives FB40 Series are sold has Top, Bottom or in Pairs (top and bottom). Fully automatic, inactive door is latched when active door closes, bolts retract when active door is opened. Top Bolt has no spring tension. They are non handed, but the top and bottom bolts are different. The body size is 1" wide, 8-1/2" tall and 2" deep, the bolts have a 3/4" throw with a 7/8" vertical adjustment.
Ives Part #'s
FB41P - Pairs
FB41T - Top
FB41B - BottomFB40 -
Floor Door Stop / Holder 534
Automatic Floor Type Holder and Stop
A replacement holder and stop that has been around for many years. This style of Holder can be found in many of the schools, churches and hospitals that were built in the 1960's and 1970's. Cast brass construction, and then chrome plated. Measures 3-11/16" high by 3" wide with a 1-15/16" projection. The strike is 1-3/16" high. Spring loaded brass roller, rolls over the the strike to lock the door in the open position. To release, just give the door a tug. Designed for doors with a door to floor clearance of less than a 1/2".
GJ534- -
Falcon Automatic Opener 8242
The Falcon Automatic Opener 8242 is a smart and easy solution to improve accessibility and meet ADA Codes. The 8242 is a non handed, surface mounted, 115 volt closer for a push side mounting. If your door is an inswinging door you would use the 8231. This self contained package features, an on board power supply, LED light on the control box to signal accurate installation and helps with connection diagnostics.
This closer features:
SmartLatch-senses and overcomes external pressure conditions with a Graduated energy assist of secure latching.
Push N Go-selectable feature allows door to open automatically as soon as it feels pressure.
Open Position Learning-automatically sets the opening position to eliminate wall and door damage.
Obstacle Obstruction Detection-safety feature stops and reverses door direction when distress or an obstruction is sensed.
Pre-Load Strike Assist-removes load on strike lip with a one second delay allowing the door to release and automatically open.
LED Light Illumination-Light illumination on control box signals accurate installation and helps with connection diagnostics.
On Board Power Supply-powers the accessories without the need to install an external power supply-12 vac
Adjustable hold open time delay, backcheck/latch position, backcheck speed, and opening and closing speeds.The package includes everything except for the actuators. Uses LCN Actuators.
8242- -
Falcon Automatic Opener 8231
The Falcon Automatic Opener 8231 is a smart and easy solution to improve accessibility and meet ADA Codes. The 8231 is a non handed, surface mounted, 115 volt closer for a pull side mounting. If your door is an outswinging door you would use the 8242. This self contained package features, an on board power supply, LED light on the control box to signal accurate installation and helps with connection diagnostics.
This closer features:
SmartLatch-senses and overcomes external pressure conditions with a Graduated energy assist of secure latching.
Push N Go-selectable feature allows door to open automatically as soon as it feels pressure.
Open Position Learning-automatically sets the opening position to eliminate wall and door damage.
Obstacle Obstruction Detection-safety feature stops and reverses door direction when distress or an obstruction is sensed.
Pre-Load Strike Assist-removes load on strike lip with a one second delay allowing the door to release and automatically open.
LED Light Illumination-Light illumination on control box signals accurate installation and helps with connection diagnostics.
On Board Power Supply-powers the accessories without the need to install an external power supply-12 vac
Adjustable hold open time delay, backcheck/latch position, backcheck speed, and opening and closing speeds.The package includes everything except for the actuators. Uses LCN Actuators.
8231- -
LCN 4811 Auto Equalizer Door Closer
LCN 4810 Door Closer Pneumatically Operated
The 4810 AUTO EQUALIZER is LCN’s pneumatically powered MULTI-DOOR solution. This low-energy automatic operator provides easy access for people with disabilities, or the elderly. Designed primarily for manual opening applications that occasionally require automatic opening.4811- -
LCN 4822 Auto Equalizer Door Closer
LCN 4820 Door Closer Pneumatically Operated
The 4820 AUTO EQUALIZER is LCN’s pneumatically powered MULTI-DOOR solution. This low-energy automatic operator provides easy access for people with disabilities, or the elderly. Designed primarily for manual opening applications that occasionally require automatic opening.4820- -
LCN 4631 Auto Equalizer Low Energy Closer
LCN 4630 Low Energy Door Closer
The 4630 AUTO EQUALIZER is LCN’s SMART & RELIABLE electrically powered low-energy power operator. It provides easy access for people with disabilities, or the elderly. Designed primarily for manual opening applications that occasionally required automatic opening.
4631- -
Floor Door Stop / Holder FS43
Floor Door Stop / Holder FS43
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF43A or F43A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS43. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 1-5/8" to 2-1/16"
Holder Dimensions 3" Wide x 3-11/16" HighGJF43A- -
Floor Door Stop / Holder FS40
Floor Door Stop / Holder FS40
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF40A or F40A, and was brought over to the H.B. Ives line in the 1990's. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 1/2" or less
Holder Dimensions 3" Wide x 3-11/16" HighGJF40A- -
Floor Door Stop / Holder FS41
Floor Door Stop / Holder FS41
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF41A or F41A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS41. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 9/16" to 1-1/16"
Holder Dimensions 3" Wide x 3-11/16" HighGJF41A- -
LCN 4642 Auto Equalizer Low Energy Closer
LCN 4640 Low Energy Door Closer
The 4640 AUTO EQUALIZER is LCN’s SMART & RELIABLE electrically powered low-energy power operator. It provides easy access for people with disabilities, or the elderly. Designed primarily for manual opening applications that occasionally required automatic opening.
4642- -
Floor Door Stop / Holder FS42
Floor Door Stop / Holder FS42
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF42A or F42A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS42. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 1-1/8" to 1-9/16"
Holder Dimensions 3" Wide x 3-11/16" HighGJF42A- -
Von Duprin EL99 Panic Device Only
This is the same trusted Von Duprin 99 with Electric Latch Retraction, also known as EL.
The EL feature allows for the remote unlatching of exit devices. A control station operator can flip a switch to retract the latch bolt and immediately change an exit door to push-pull operation. A powerful, continuous duty solenoid retracts the latch bolt, either for momentary unlatching, or for extended periods of time. The EL feature is an alternative to manual dogging.
EL devices are also useful with automatic door operators, and may be applied to fire-rated applications when under the control of an automatic fire alarm system.
UL approved for Class II circuit applications.
The EL option does not include the power transfer from door to frame, the power supply, or the control operator. Refer to EPT-2 power transfer and the PS914 power supply.
The PS914 with the 9002RS option card is the minimum option card required. Other option cards available for other functions, see PS914 power supply for additional information.
Ships with all the mounting screws and the 299 Strike.
EL99EO-Corbin Russwin ED5400 Panic Device
Corbin Russwin ED5400 Exit Device
Handing
Device is handed but easily field reversible.
Lever trim is handed.
Bar Length
Easily field cut to size.
Standard: 36" (914mm) bar fits 30"- 36" door.
Door Thickness
1-3/4" (44mm) standard.
Stile
Minimum width 4-1/2" (114mm).
Door Height
Standard top rod for 7' door.Replacement parts are also available
ED5400Full Mortise Spring Hinge
The Full Mortise Spring Hinge is found in many hotels and motels across the United States. They are an inexpensive way to meet Fire Codes. An internal adjustable spring in the hinge closes the door when they are opened. So instead of using a door closer, you can use these spring hinges. One draw back is you can not slow the door down and they will slam shut. We do not recommend these self closing hinges if your door swings more than 110 degrees, chances are the spring will break. They are constructed of 10 gauge (.134”) steel that is then plated or paint primed. We ship them in boxes of 3 hinges, and they ship with machine and wood screws.
Shown in brushed brass
G400XXWall Door Holder/Stop 531
The Wall Door Holder/Stop 531 features cast brass or bronze finish which is then plated to the desired finish. This is considered a manually operated door holder, because it does not latch automatically. It features a 2-1/2" base with 3-5/8" projection, and ships complete with all of the needed fasteners.
GJ531-LCN Door Closer 4111 HCUSH Hold Open
LCN Door Closer 4111 HCUSH Hold Open
Standard 4110 series closer shipped with HOLD OPEN CUSH N STOP arm, standard plastic cover, 4110-201 FIFTH SCREW SPACER and self reaming and tapping screws. Sized cylinders adjustable for interior doors to 5’0” and exterior doors to 4’0”. Non-sized cylinder adjustable for interior doors to 4’6” and exterior doors to 3’6”. Closer mounts parallel arm, specify right or left swinging door. 4111 cylinder meets ADA requirements. The cush hold open arm allows for a stop and hold open positions up to 110 degrees. "T" handle on arm will release door for closing, locking pin can be retracted for normal door closing operation.
We ship the 4111 HCUSH
4110HCUSH-LCN Door Closer 4021
The LCN Door Closer 4021 is also known as the Smoothee. The 4021 ships with regular arm, standard plastic cover, and self reaming and tapping screws. The 4021 is considered an application specific closer. Meaning you have to specify left and right swing door, and can only be mounted top jamb. A top jamb mount is when the closer is mounted on the top rail of the door frame and the arms hangs down and attaches to the door. Top Jamb door closers are also mounted on the pull side of the door. The Non sized cylinder will work on just about any size interior or exterior door and meets ADA requirements. We ship the 4021 REG.
4020-International Door Closer 852P Series
The International Door Closer 852P Series is common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 32” interior or 28” exterior doors.
3/4" x 7-3/8" mounting holes
852-International Door Closer 851P Series
The International Door Closer 851P Series is not a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 32” interior or 28” exterior doors. The 851 meets the size 1 ADA requirements.
3/4" x 6-3/8" mounting holes
851-LCN Door Closer 4111
The LCN Door Closer 4111 is known as the Smoothee, and is one of the heaviest duty door closers made. If you have a building were you have a high traffic and abusive, especially exterior doors, then this is the closer. The 4111 is an application specific closer, meaning it will only work when mounted on the door, on the push side. This is known as a parallel arm application. The cylinder is fully adjustable and will work on doors up to 56" exterior door, and can be adjust down to ADA required levels. We ship the 4111 EDA model, which is a non hold open arm, on this page. The cylinder mounting holes are 2-1/2" by 6".
4110LCN Concealed Door Closer 3031
The LCN Concealed Door Closer 3031 is mortised into the top of the door. Standard 3030 series closer shipped with regular arm and wood and machine screw pack. Sized cylinders for interior doors to 4’0”. Handed for right or left swinging doors. Closers to meet ADA requirements.
3030-Norton Door Closer 8301
The Norton Door Closer 8301 is sometimes called the Omni Door Closer. This door closer features a cast aluminum body, is a Grade 1 closer and has adjustable closing, latching, and back check speeds. This closer is a non sized closer, meaning you adjust the spring tension to meet closing requirement for a ADA Barrier Free application all the way up to a 48” exterior door. You cover might have 8301/8301BF 3301/3301BF, but the new version will cover the BF and non BF closers. The difference between this closer and the 8501 is the size of the plastic cover. The 8301 has a slim cover, and the 8501 has full cover. The hole spacing on this door closer is 3/4” x 12”.
8301-International Door Closer 854P Series
The International Door Closer 854P Series is a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and whether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 42” interior or 36” exterior doors.
3/4" x 9-1/16" mounting holes
854-International Door Closer 855P Series
The International Door Closer 855P Series is a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 48” interior or 42” exterior doors.
3/4" x 9-1/16" mounting holes
855-LCN Door Closer 4111 HEDA Hold Open
The LCN Door Closer 4111 HEDA Hold Open is known as the Smoothee, and is one of the heaviest duty door closers made, the HEDA stands for Hold Open Extra Duty Arm. If you have a building were you have a high traffic and abusive, especially exterior doors, then this is the closer. The 4111 is an application specific closer, meaning it will only work when mounted on the door, on the push side. This is known as a parallel arm application. The cylinder is fully adjustable and will work on doors up to 56" exterior door, and can be adjust down to ADA required levels. We ship the 4111 HEDA model, which is a hold open arm on this page. The cylinder mounting holes are 2-1/2" by 6".
4110H-LCN Door Closer Fusible Link Arm 3049FL
LCN Door Closer Fusible Link Arm
Adjustable nut allows door closer arm to lock when the preselect position is reached. Fusible Link will hold door until heat melts the "Link" and then the door will shut. Used on Fire Doors to control a spreading fire.
Specify your current closers model number when ordering.
Not all of the LCN closers have the same shape spindle on the door closer
cylinder. The LCN Part #'s on this Fusible Link Arm is: 4010-3049FL, 4020-3049FL, 4110-3049FL3049FLInternational Door Closer 885P Series
The International Door Closer 885P Series is a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features three adjustment valves for closing,latching speeds and one for back check. The cylinder is constructed of precision cast aluminum. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 48” interior or 42” exterior doors.3/4" x 9-1/16" mounting holes
885-LCN 4050 Rw/PA Door Closer-New
The LCN 4050 Rw/PA Door Closer is a newer Closer and is a direct replacement for the Norton 7500, Yale 4400, and Falcon/Dor-o-Matic SC70 Series Door Closers. It features, a cast aluminum cylinder, 25 year warranty, powder coated finishes, and stick on mounting template. This door closer comes with the ability to mount on the push, pull or top jamb and is non handed. The door closer meets Grade 1-ANSI A156.4, UL/cUL, ADA and the Buy American Act certifications.
Hole Spacing: 2-3/8” x 6-3/4”
4050-LCN Door Closer 4031
The LCN Door Closer 4031 is shipped with forged regular arm, metal cover and wood/self-tapping machine screw pack. Non-sized (1-4) 4031 cylinder for exterior doors to 36” (914 mm) and interior doors to 48” (1219 mm). Closer mounts hinge side, top jamb, and parallel arm, on either right or left swinging doors. Closer meets ADA requirements. The hole spacing on this closer will not match the 4030's that LCN produced up to 1997, that was a completely different door closer.
We ship the 4031 Rw/PA
4030-International Door Closer 853P Series
The International Door Closer 853P Series is a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and whether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 32” interior or 28” exterior doors.
Direct replacement for the older style Norton 1602 and 1603, and Yale 52 and 53, that had the 3/4" x 8-3/16" mounting holes
853-Global Door Controls TC201 Door Closer
The Global Door Closer TC200 is recommended for use on all aluminum store front doors, wood or hollow metal commercial applications. It is a versatile utility closer that provides narrow styling and has a full selection of accessories to accomodate the requirement of any field installation.
In this series, our Global Door Closer TC201 is a multi-size spring model that offers adjustable power with a choice of range sizes 2-5 where high rates of closing force are required. Our TC201ADA model also offers adjustable spring power sizes 1-4 for use on interior doors requireing less than 5 lbs. of opening force and exterior doors requiring less than 8.5 lbs. This complies with ADA handicap codes and ANSI/BHMA standard requirements. Both models will retrofit most full size closers with a 9 1/16" industry standard hole patten to update any opening for code compliance.
Hole Spacing is 3/4" x 9-1/16"
Options: Specify when ordering:
- Finish - AL, DU
- Size 1-4 or 3-6
TC201--LCN Door Closer Regular Arm 3077
The LCN Door Closer Regular Arm 3077 ships with 95 percent of there door closers. This is the standard regular. Specify your current closers model number when ordering. Not all of the LCN closers have the same shape spindle on the door closer cylinder. The fitting for the 4040 is a six sided, the 4010, 4020 and 4110 have a flat sided oval, and the 1260 and 1460 have an eight sided star. The LCN Part #'s on this Regular Arm is: 1260-3077, 1460-3077, 4010-3077, 4020-3077, and 4040-3077. If your model is not here, call us and we will quote you a price.
3077LCN Door Closer 1461
The LCN Door Closer 1461 series closer ships with regular arm, a slim line plastic cover, and self reaming and tapping screws. Non-sized (1-6) cylinder is adjustable for interior doors to 5’0” and exterior doors to 4’0”. Closer mounts hinge side, top jamb and parallel arm on either right or left swinging doors. The narrow foot print allows this door closer to be mounted on the top jamb and narrow stile doors without a drop plate.
We ship the 1461 Rw/PA
1460-