ATTENTION: During the COVID-19 outbreak we are available 8:00am-4:00pm EDT, Monday-Friday until further notice.
We are still shipping Monday-Friday at this time.
In store pickup is available with appointment only. Call for more information.
In stock orders placed now will be shipped next business day.
Replacement springs for the older Pot Type Norton Door Closers
You should find a number stamped on the end plug, which should relate to the "Size" below. See the picture under "More Views"
Norton Size B 1-1/4" high x 2-1/4" diameter
Norton Size C 1-1/2" high x 2-5/8" diameter - currently out of stock
Norton Size D 1-3/4" high x 3" diameter - currently out of stock
Norton Size E 2" high x 3" diameter
Norton New Style Replacement Door Closer Springs
This is the replacement door closer spring for the Norton 78, and Yale 1900 Door Closers. Spring measures 2-11/16" diameter by 2" tall. This spring is identifiable by the number stamped on the band that holds the spring together. The band will be stamped either B/D 2/4, or E/F 5/6.
Norton 78 B/D and Yale 1902-4 use spring 24BD
Norton 78 E/F and Yale 1904-6 use spring 56EF
Norton Part # 24BD
Norton Part # 24EF
Norton 7700 Series Power Track Arm
Arm is shipped will all of the necessary hardware. This assembly includes the 7701ST-1AT Adjusting Head and Tube Assembly, and the 7701ST-1AR Adjusting Rod Assembly. The square shaft measures 7/16" x 7/16". The aluminum finish ships within 24 hours, dark bronze will take a little longer.
Norton Part # 7701ST-1A
Norton CloserPlus Hold Open Arm
This heavy duty Parellel Arm can be used with the Norton 1600, 9300, 8000 and 7500 door closers. The knob on the main are locks and unlocks the arm to hold your door open.
Aluminum is in stock, Dark Bronze is 2-3 week lead time.
Norton Part # 6870T-8
The Norton Door Closer 7701-13 Hold Open Loop Assembly is usually the part that breaks on the Norton 1600, 9300, 8301, 8501 and 7500 Hold Open Door Closers. The cast iron piece attached to the disk is where they usually break. This part has had a few part numbers over the years, for Norton it has been known as the 1620-13 and 7701-13, and for Yale the 400-13.
Norton / Yale Door Closer Hold Open Parallel Bracket
Replacement bracket works with the Norton 1600, 9300, 7500, and 8000 series, along with the Yale 50, 3000, and 4400 series hold open closers.
Norton Part # 1628H
Yale Part # 588
The Norton / Yale Door Closer 7701-3 Hold Open Arm is the standard hold open arm shipped with Norton and Yale Door Closers. It is known as a Friction Hold Open, because as the arm rotates it tightens down two plates together. Adjusting the large hex bolt on the Hold Open Assembly determines where the arm will hold open. This part has had a couple of numbers over the years 7701-3, 1620-3 for Norton and 400-3 for Yale.
Norton / Yale Door Closer Arm Shoe Assembly
Replacement Shoe Assembly for Norton 1600, 9300, 7500 and 8000 series door closers. And Yale 50, 2300, 8000 and 4400 series.
Base measures 11/16" x 2-1/4" with 1-3/4" center to center screw hole mounting. Bracket projects out 15/16". The pin is 3/8" diameter.
Norton part # 7701AS or a Yale # 400-AS
Old Norton Part # 1620AS
The Norton Door Closer Parallel Arm Bracket is the bracket shipped with the Norton 1600, 7500, 8301, 8501 and 9300 series closers. This bracket is also used by Yale on there 2300, 50, 3301, 3501 and 4400 door closers. The factory part number on this is 1618A for Norton and 289A for Yale.
The Norton Door Closer Regular Arm is the standard arm that is shipped with the 9300, 1600, 8301, 8501 and 7500 door closers. It will also work with the Yale 2300, 50, 3301, 3501 and 4400 series door closers. This arm has had a bunch of different factory numbers over the years, including 1620-1, 7701-1 and 400-1.
The Norton Door Closer 9300 is a lighter weight version of the 1600. This door closer is a Grade 3 closer, and is designed for light commercial use. This door closer has a fixed spring, so the tension can not be adjusted. The version we send is for a 36” door, and features adjustable closing, latching and back check speeds. The hole spacing on this door closer is 3/4” x 9-1/16”.
The Norton Door Closer 1601 has been around for the past 40 years. With the advent of aluminum framed glass doors, Norton was on for the first manufactures to come up with a narrow stile door closer. Because of this, it is still one of the most popular door closer model out there. It is a Grade 1 closer and has adjustable closing, latching, and back check speeds. The model we ship also has adjustable spring tension to work on a wider range of doors. The hole spacing is 3/4” x 9-1/16”.
Older models may be stamped with Scoville or Eaton, which are the companies that used to own Norton. We sometimes find 20-1624-4001, or 20-1604-4001 stamped on the back of the closer. If your door closer is stamped 20-1603-4001 or 20-1623-4001, you might want to double check the hole spacing. The 20-1603-4001 usually has a hole spacing of 3/4" x 8-3/16", you could use the International Door Closer 853 as a replacement.
The Norton Door Closer 8301 is sometimes called the Omni Door Closer. This door closer features a cast aluminum body, is a Grade 1 closer and has adjustable closing, latching, and back check speeds. This closer is a non sized closer, meaning you adjust the spring tension to meet closing requirement for a ADA Barrier Free application all the way up to a 48” exterior door. You cover might have 8301/8301BF 3301/3301BF, but the new version will cover the BF and non BF closers. The difference between this closer and the 8501 is the size of the plastic cover. The 8301 has a slim cover, and the 8501 has full cover. The hole spacing on this door closer is 3/4” x 12”.
The Norton Door Closer 8501 is sometimes called the Omni Door Closer. This door closer features a cast aluminum body, is a Grade 1 closer and has adjustable closing, latching, and back check speeds. This closer is a non sized closer, meaning you adjust the spring tension to meet closing requirement for a ADA Barrier Free application all the way up to a 48” exterior door. You cover might have 8501/8501BF 3501/3501BF, but the new version will cover the BF and non BF closers. The difference between this closer and the 8301 is the size of the plastic cover. The 8301 has a slim cover, and the 8501 has full cover. The hole spacing on this door closer is 3/4” x 12”.
The Norton Apollo Door Closer 7500 has been around for quite a long time, and was designed to replace the older 7700, which are still made. The beauty of the 7500 is that is can be mounted left or right, push, pull or top jamb, were as the 7700 you had to specify all those attributes, which made stocking them a head ache. This is a Grade 1 closer, and is extremely durable. If you are looking for a 7500BF, the barrier free version, the new 7500 is barrier free, and will do the trick. This closer has a 2-3/8" x 6-3/4" hole spacing.
The Norton Traditional Door Closer 78 B/D is a door closer used in historic buildings. This is a replica of the original cast iron door closer used from the 1920’s to 1960’s. The new version is made of a cast aluminum alloy material, and should only be used when you are trying to keep historic designations. The hole spacing on this closer is 1-3/8" x 4-1/4”.
The Norton PPTO PowerTrack for P7705 is a replacement piece for the P7705PTO Door Closer. The Track includes the Slider, Soleniod and new mounting screws. The PPTO Track is for the Push Side of the door, also known as the Stop Side because the track mounts on the jamb stop.
Norton Part # PPTO24 or PPTO120
The Norton PTO PowerTrack for 7705 is a replacement piece for the 7705PTO Door Closer. The Track includes the Slider, Soleniod and new mounting screws. The Track measures 21-1/4" long with a hole spacing of 19" on centers. The PTO Track is for the Pull Side of the door, also known as the Hinge Side because you can see the hinges on that side. On the PTO Track Assembly you can see the Two Mounting Holes
Norton Part # PTO24 or PTO120
The Norton Door Closer 1601BF Barrier Free has been around for about 10 years. We the advent of aluminum framed glass doors, Norton was on for the first manufactures to come up with a narrow stile door closer. Because of this, it is still one of the most popular door closer model out there. It is a Grade 1 closer and has adjustable closing, latching, and back check speeds. The Barrier Free version just means you can turn the spring tension down to a size 1 spring, which will meet the ADA codes (less than 5 pounds of resistance). The model we ship also has adjustable spring tension to work on a wider range of doors. The hole spacing is 3/4” x 9-1/16”.
The Norton Door Closer 7700 Series Power Track combine the functions of a single point electromechanical door holder with the proven reliability of a 7700 Series Door Closer. The track assembly contains an arm slide and solenoid operated hold open mechanism and is available with or without an integral smoke detector. The closer is mounted on the door. The Power Track and hook-up box are mounted to the frame face for pull side installations or the frame soffit for push side installations.
Two versions, the Master Unit (PTDO) and the Support Unit (PTO). The PTDO has an integral smoke detector. The PTO can be plugged into the PTDO or into your existing fire alarm system. Both units can be mount pull side of the closed door, or the push side, please specify when ordering. Specify voltage (24 volt or 120 volt) and color (aluminum or dark brown). Dark Brown is a 3 week lead time, Aluminum is in stock.