Door Hardware| Ives

RBA Door has been supplying commercial businesses across the nation with door hardware parts and accessories since 1970. With our help, our customers keep their doors and high traffic entryways in top condition through our variety of door parts and accessories. At RBA Door, we can provide you with our selection of door hardware parts, and any accompanying accessories you may need as well. Having these commercial hardware parts allows our customers to rely on us knowing they have a reliable door hardware parts supplier to count on. Give us a call today to speak to one of our sales experts.

Filter
View as Grid List

11 Items

per page
Set Descending Direction
  1. Lock Guard Narrow Line

    • Narrow design unit for use on rose or escutcheon 3-1/2" or less.
    • For use with Type 86 Mortise and Type 161 Cylinder Locks
    (ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000).
    • No exposed fasteners on face of unit.
    • Unique design provides maximum security, virtually eliminating the opening
    between door and frame at the latch point.
    • Available in 13 Gauge Stainless Steel or 12 Gauge Steel

    1-1/2" Wide x 9-1/2" High
    Stud center to center: 8-1/2”

    1625NL-
    As low as $37.54
  2. Lock Guard Standard Line

    • Ideally suited for use with rose or escutcheon 2-3/4" wide or less.
    • For use with Type 86 Mortise and Type 161 Cylindrical Locks
    (ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000).
    • No exposed fasteners on face of unit.
    • Unique design provides maximum security, virtually eliminating the
    opening between door and frame at the latch point.
    • Available in 13 Gauge Stainless Steel or 12 Gauge Steel.

    2-1/2" Wide x 9-1/2" High
    Stud center to center: 8-1/2"

    1625-
    As low as $37.54
  3. Lock Guard Slim Line

    • Designed for use on all Type 161 Cylindrical Locks (ANSI 156.2 Series 2000)
    Monolock and Unilock.
    • No exposed fasteners on face of unit.
    • Unique design provides maximum security, virtually eliminating the
    opening between door and frame at latch point.
    • Available in 13 Gauge Stainless Steel or 12 Gauge Steel.

    1-1/2" Wide x 7" High
    Stud center to center: 4-1/2"

    1625SL-
    As low as $32.54
  4. Ives LG1 Lock Guard

    The Lock Guard with Security Pin is ideal to cover the latchbolt area of the door, lock and frame, with the added protection of a security pin to prevent separation of the door and door frame.  The plate is through bolted with carriage bolts and nuts, which are included with the guard.  The plate is constructed of 13 gauge stainless steel.  The plate measures 3" wide and 11-1/2" high, with a center to center on the mounting bolts of 10-1/2".

    Ives Part Number LG1-US32D

    LG1-
    As low as $59.16
  5. Continuous Full Mortise Hinge

    The Ives 112HD Continuous Full Mortise Hinge Geared Hinge measures 83" long and is constructed of extruded aluminum.  This hinge is non handed, and will work on doors up to 48" wide and 450 pounds.  You can easily cut this hinge in the field if your door is less than 83" high.

    GFM100-
    As low as $312.23
  6. Ives Surface Bolt 8" SB453

    The Ives Surface Bolt 8" SB453 has a 1-3/16" throw.  The bar has a cross section measurement of 3/4" wide by 1/4" thick.  It features a strong tension springs to prevent the bolt from creeping.  The bolt is shipped with all of the fasteners and a universal top and a standard mortise strike.  It is constructed of heavy duty steel that is then cadmium plated.

    Ives part # SB453-8-TB-2C

    GSB82C
    $45.19
  7. Continuous Full Surface Geared Hinge

    The Ives 157XY Continuous Full Surface Geared Hinge is an ideal solution for the replacement or worn or broken storefront door pivots, which we run across quite often. I our opinion this is the best solution if you can not find a compatable replacement pivot. The geared hinge will not allow the door to twist, which makes your door more sturdy in the frame. This hinge measures 83" long and is 3-7/16" wide included the cover which hides the screw mounting. A patented easy to install, heavy duty hinge which offers lateral and vertical adjustablility whle the door is still hanging. The hinge is non handed, will mount on a narrow frame, can be cut down in the field and will work on doors up to 550 pounds. 12-24 x 1/2" steel self drilling and tapping screws are included.
    GFS102-
    As low as $284.59
  8. Ives 7212 Pivot Set

    • Handed
    • Top, header mount
    • Bottom, jamb mount
    • Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2"
    • Maximum door load 200 pounds
    • Vertical adjustment range 3/16", with positive locking

    Handing diagram

    7212
    As low as $309.70
  9. Ives 7212INT Intermediate Pivot

    • Use with 7212, 7212V or 7222 3/4 Offset Pivot
    • Handed
    • Vertical adjustment 3/16", include positive locking.

    Handing diagram

    7212INT
    As low as $232.56
  10. Ives 7222 Pivot Set

    • Handed
    • Top, header mount
    • Bottom, base plate mount
    • Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2"
    • Maximum door load 200 pounds
    • Vertical adjustment range 3/16", with positive locking

    Handing diagram

    7222
    As low as $303.85
  11. Ives 7222INT Intermediate Pivot

    • Use with 7212, 7212V or 7222 3/4 Offset Pivot
    • Handed
    • Vertical adjustment 3/16", include positive locking.

    Handing diagram

    7222INT
    As low as $232.56
View as Grid List

11 Items

per page
Set Descending Direction