Hinges

Since 1970, RBA Door has been supplying commercial businesses across the nation with top-notch door parts and accessories. We make sure that our customers can keep their doors and high traffic areas in the best possible condition with door parts and accessories of all kinds. At RBA Door, you can find door hinges to fit all the doors in your building. For more information on door hinges and other parts, give us a call today.

Filter
View as Grid List

Items 1-36 of 41

per page
Set Descending Direction
Page
  1. Securitron EPT

    The Securitron EPT Electric Pwer Transfer provides concealed, secure power and data conduit between a frame and the door.   Transmitting power to electrified locks and exit devices and more.  The EPT comes in two lengths, 10 inch cord and 18 inch cord.

    EPT-
    As low as $75.88
  2. Gravity Pivot

    Bommer type Gravity Pivot, similar to the obsolete Bommer 7512. Includes top pivot and mounting screws. Available in 603 zinc plated or painted dark bronze or black.

     

    B7512-
    As low as $40.00
  3. Full Mortise Two Bearing Shim Hinge

    The PBB Shim Hinge is for use in Fire Doors where the doors are not square.  Putting cardboard or wood shims on fire doors is prohibited, so they have come up with a solution where one of the leaves are drilled tapped and a set screw is inserted.  These hinges are only available in 4.5 x 4.5 sizes in brushed chrome finish. They are sold in boxes of three hinges and come with wood and machine screws. The base metal is steel.

    SHBB81
    $70.00
  4. TH1100-HK1 Deluxe Hinge Kit

    The TH1100-HK1 is the perfect solution for existing hinges that have failed, and is a quick and easy fix for compromised door openings.  Deluxe Hinge Kit TH1100-HK1 comes in a package of two hinges, 2 1/4" shims, and 12 one-way mounting screws.   The hinges are non handed, will work on Flush, and 1/8" offset door applications, have a self lubricating pin that rotates on anti-friction bearings, and have a vertical adjustment screw.   They are constructed of an aluminum alloy.

    TH1100HK1-
    As low as $96.43
  5. Finger Protector For Doors - Exterior Pull Side

    Door Finger Protector - Exterior Pull Side

    This model is specifically designed for exterior doors on the pull side of the door. This patented Finger-Gard product is designed for both exterior and interior doors and thus will operator in very cold and very hot tempetures. Flexible to minus 40 degrees. They are made of a special rubber that is resistant to harsh sunlight. They will allow the door to swing up to 180 degrees. This product is available in Brown or White, 78" or 83" lenghts

    Our part # on this is GFG7 for the 78" length, and GFG7+ for the 83" length.

    GFG-D
    $37.81
  6. Finger Protector For Doors - Exterior Push Side

    Door Finger Protector - Exterior Push Side

    This model is specifically designed for exterior doors on the push side of the door. This patented Finger-Gard product is designed for both exterior and interior doors and thus will operator in very cold and very hot tempetures. Flexible to minus 40 degrees. They are made of a special rubber that is resistant to harsh sunlight. They will allow the door to swing up to 180 degrees. This product is available in Brown or White, 78" or 83" lenghts

    Our part # on this is GFG5 for the 78" length, and GFG5+ for the 83" length.

    GFG-C
    $51.24
  7. Finger Protector For Doors - Interior Pull Side

    Door Finger Protector - Interior Pull Side

    These patented door guards fold against the jamb, allowing them to swing completely 180 degrees. The guard is attached to the face of the door and frame with the provided strong adhesive tape. Clear-frosted color to compliment any color scheme. Finger-Gard for use on Interior Doors, on the pull side. Available in 54" or 78" lengths.

    Part number GFG3 for 54" length, and GFG4 for the 78" length

    GFG-B
    As low as $34.41
  8. Finger Protector For Doors - Interior Push Side

    Door Finger Protector - Interior Push Side

    These patented door guards fold against the jamb, allowing them to swing completely 180 degrees. The guard is attached to the face of the door and frame with the provided strong adhesive tape. Clear-frosted color to compliment any color scheme. Finger-Gard for use on Interior Doors, on the push side. Available in 54" or 78" lengths

    GFG-A
    As low as $34.41
  9. Full Mortise Heavy Duty Hinge

    The Full Mortise Heavy Duty Hinges are standard butt hinge.  They are designed for heavy weight doors with a high frequency of usage.  These are ideal for exterior doors in schools, hospitals and other commercial venues.  The hinge offers four bearings, one between each leaf of the knuckle.  They are constructed of 7 gauge (.180”) steel that is then plated or paint primed.  We sell them in boxes of 3 hinges, and they ship with machine and wood screws.

    Shown in brushed chrome

    Plated Door Finishes

    G300XX
    As low as $59.82
  10. Full Mortise Hinge Straightener

    Straightens bent full mortise hinges. Slide cylinder over the butt of the hinge and rotate. Extra long handle provides the torque to bring the hinge back inline. t measures 19-1/2" long, with barrels on each end of 3/4" and 1" diameters.

    G500ST
    $69.96
  11. Full Mortise Medium Duty Hinge

    The Full Mortise Medium Duty Hinge are a standard butt hinge.  They are designed for medium weight doors with a high frequency of usage, but usually interior doors with a door closer.  The hinge offers two bearings, to provide easy rotation.  They are constructed of 10 gauge (.134”) steel that is then plated or paint primed.  We sell them in boxes of 3 hinges, and they ship with machine and wood screws.

    Shown in brushed chrome

    Plated Door Finishes

    G200XX
    As low as $27.96
  12. Full Mortise Regular Weight Hinge

    The Full Mortise Regular Weight Hinge are for lighter weight interior doors without a door closer.  They are constructed of 10 gauge (.134”) steel that is then plated or paint primed.  We sell them in boxes of 3 hinges, and they ship with machine and wood screws.

    Shown in brushed brass

    Plated Door Finishes

    G100XX
    As low as $8.61
  13. Full Mortise Spring Hinge

    The Full Mortise Spring Hinge is found in many hotels and motels across the United States.  They are an inexpensive way to meet Fire Codes.   An internal adjustable spring in the hinge closes the door when they are opened.  So instead of using a door closer, you can use these spring hinges.  One draw back is you can not slow the door down and they will slam shut.  We do not recommend these self closing hinges if your door swings more than 110 degrees, chances are the spring will break.  They are constructed of 10 gauge (.134”) steel that is then plated or paint primed.   We ship them in boxes of 3 hinges, and they ship with machine and wood screws.

    Shown in brushed brass

    Plated Door Finishes

    G400XX
    As low as $41.85
  14. BB84 Half Surface 4-1/2" Door Hinge-Box of 3

    The BB84 Half Surface 4-1/2” Door Hinge is a specialty hinge.  The hinge leaf will mount on the door frame in the standard mortise position and the other leaf mounts on the door face.  These are five knuckle, two bearing with square edges.  They are constructed of 10 gauge (.134”) steel that is then plated to the desired finish.  We ship in boxes of 3 hinges with the wood and machine screw.

    G70045-
    As low as $75.58
  15. BB82 Half Mortise 4-1/2" Door Hinge-box of 3

    The BB82 half Mortise 4-1/2” Door Hinge is a specialty hinge. The hinge fastens to the standard mortise slot on the door and the other leaf mounts on the face of the door frame. These are five knuckle, two bearing with square edges. They are constructed of 10 gauge (.134”) steel that is then plated to the desired finish. We ship in boxes of 3 hinges with the wood and machine screw.

    G60045-
    As low as $67.91
  16. BB83 Full Surface 4-1/2" Door Hinge-3 per box

    The BB83 Full Surface 4-1/2” Door Hinge is a specialty hinge.  The hinge fastens to the face of the door and the face or the door frame.  These are five knuckle, two bearing with square edges.  They are constructed of 10 gauge (.134”) steel that is then plated to the desired finish.  We ship in boxes of 3 hinges with the wood and machine screw.

    G80045-
    As low as $61.91
  17. EPT-10 Von Duprin Power Transfer

    The EPT-10 Von Duprin Power Transfer is a 10 wire, 24 gauge, means to transfer power from the door frame to the door.   The kit includes everything that is need to complete the installation.

    Von Duprin Part # EPT-2

    EPT10-
    As low as $588.72
  18. EPT-2 Von Duprin Power Transfer

    The EPT-2 Von Duprin Power Transfer is a 2 wire, 18 gauge, means to transfer power from the door frame to the door.   The kit includes everything that is need to complete the installation.

    Von Duprin Part # EPT-2

    EPT2-
    As low as $599.10
  19. Intermediate Hinge IP-1901 and IP-1902

    Intermediate Hinge IP-1901 and IP-1902

    Cast aluminum construction with steel bearings. The hinge measures 5" high by 2-1/2" wide. This hinge has a 3/4" offset. We find this hinge in the middle section of the door between the top and bottom hinges. Available in the Aluminum color and Dark Brown. See the dimensional information under more views.

    Manufacture Part # IP-1901 and IP-1902
    IP-1901 is for Left Hand Doors
    IP-1902 is for Right Hand Doors

    GIP1901-
    As low as $47.85
  20. Intermediate Hinge IP-2202 and IP-2201

    Intermediate Hinge IP-2202 and IP-2201

    Cast aluminum construction with steel bearings and axle. The set measures 3-1/2" tall with an 1-3/8" projection. This hinge is usually used an an intermediate hinge in between the top and bottom hinge.

    Manufacture part # IP-2202 and IP-2201
    IP-2202 is for Right Hand Doors
    IP-2201 is for Left Hand Doors

    GIP2201-
    As low as $50.64
  21. Pivot Set TH1110 Arch/Vista Wall

    TH1110 Arch/Vista Wall Offset Pivots are used for both flush face frame installation and 1/8" recessed door applications. Pivots replace most major door manufactures. Suitable for aluminum doors weighing up to 125 pounds. These pivots are engineered and designed for durability, style and are easy to install. To order pivot: For LHRB door order RH pivot For RHRB door order LH pivot Specifications * 3/4" offset pivots for aluminum doors and frames * For flush door / frame and 1/8" recessed door applications * Weather resistant * Aluminum case construction * Vertical adjustment 1/8" * Full race ball bearing and design, provides smooth operation on bottom pivot door portion * No sag, entire weight of doors rests on floor mounted pivot portion * Completely temper proof, yet easily removable, replaceable in unlocked position * All pivots are handed- specify LH, RH * Finish: AL-Aluminum, DU-Duronotic

    right hand left hand diagram

    TH1110
    As low as $32.23
  22. Pivot Set TH1112 Amarlite Style

    TH1112 Offset Pivots are used for both flush face frame installation and 1/8" recessed door applications. Pivots replace most major door manufactures. Suitable for aluminum doors weighing up to 125 pounds. These pivots are engineered and designed for durability, style and are easy to install. To order pivot: For LHRB door order RH pivot For RHRB door order LH pivot Specifications * 3/4" offset pivots for aluminum doors and frames * For flush door / frame and 1/8" recessed door applications * Weather resistant * Aluminum case construction * Vertical adjustment 1/8" * Full race ball bearing and design, provides smooth operation on bottom pivot door portion * No sag, entire weight of doors rests on floor mounted pivot portion * Completely temper proof, yet easily removable, replaceable in unlocked position * All pivots are handed- specify LH, RH * Finish: AL-Aluminum, DU-Duronotic

    right hand left hand diagram

    TH1112
    As low as $30.68
  23. Pivot Set TH1114KM Pitco Style

    TH1114KM Pitco Style Offset Pivots are used for both flush face frame installation and 1/8" recessed door applications. Pivots replace most major door manufactures. Suitable for aluminum doors weighing up to 125 pounds. These pivots are engineered and designed for durability, style and are easy to install. To order pivot: For LHRB door order RH pivot For RHRB door order LH pivot Specifications * 3/4" offset pivots for aluminum doors and frames * For flush door / frame and 1/8" recessed door applications * Weather resistant * Aluminum case construction * Vertical adjustment 1/8" * Full race ball bearing and design, provides smooth operation on bottom pivot door portion * No sag, entire weight of doors rests on floor mounted pivot portion * Completely temper proof, yet easily removable, replaceable in unlocked position * All pivots are handed- specify LH, RH * Finish: AL-Aluminum, DU-Duronotic

    right hand left hand diagram

    TH1114KM
    As low as $30.68
  24. Pivot Set TH1114U US Alum

    TH1114U US Alum Offset Pivots are used for both flush face frame installation and 1/8" recessed door applications. Pivots replace most major door manufactures. Suitable for aluminum doors weighing up to 125 pounds. These pivots are engineered and designed for durability, style and are easy to install. To order pivot: For LHRB door order RH pivot For RHRB door order LH pivot Specifications * 3/4" offset pivots for aluminum doors and frames * For flush door / frame and 1/8" recessed door applications * Weather resistant * Aluminum case construction * Vertical adjustment 1/8" * Full race ball bearing and design, provides smooth operation on bottom pivot door portion * No sag, entire weight of doors rests on floor mounted pivot portion * Completely temper proof, yet easily removable, replaceable in unlocked position * All pivots are handed- specify LH, RH * Finish: AL-Aluminum, DU-Duronotic

    right hand left hand diagram

    TH1114U
    As low as $30.68
  25. Pivot Set TH1116 Aldora Style

    TH1116 Aldora Style Offset Pivots are used for both flush face frame installation and 1/8" recessed door applications. Pivots replace most major door manufactures. Suitable for aluminum doors weighing up to 125 pounds. These pivots are engineered and designed for durability, style and are easy to install. To order pivot: For LHRB door order RH pivot For RHRB door order LH pivot Specifications * 3/4" offset pivots for aluminum doors and frames * For flush door / frame and 1/8" recessed door applications * Weather resistant * Aluminum case construction * Vertical adjustment 1/8" * Full race ball bearing and design, provides smooth operation on bottom pivot door portion * No sag, entire weight of doors rests on floor mounted pivot portion * Completely temper proof, yet easily removable, replaceable in unlocked position * All pivots are handed- specify LH, RH * Finish: AL-Aluminum, DU-Duronotic

    right hand left hand diagram

    TH1116
    As low as $30.68
  26. Pivot Set TH1118-B Kawneer Style

    TH1118-B Offset Pivots are used for both flush face frame installation and 1/8" recessed door applications. Pivots replace most major door manufactures. Suitable for aluminum doors weighing up to 125 pounds. These pivots are engineered and designed for durability, style and are easy to install. To order pivot: For LHRB door order RH pivot For RHRB door order LH pivot Specifications * 3/4" offset pivots for aluminum doors and frames * For flush door / frame and 1/8" recessed door applications * Weather resistant * Aluminum case construction * Vertical adjustment 1/8" * Full race ball bearing and design, provides smooth operation on bottom pivot door portion * No sag, entire weight of doors rests on floor mounted pivot portion * Completely temper proof, yet easily removable, replaceable in unlocked position * All pivots are handed- specify LH, RH * Finish: AL-Aluminum, DU-Duronotic

    right hand left hand diagram

    TH1118-B
    As low as $47.42
  27. Kawneer Style Intermediate TH1121 Hinge

    Kawneer Style Intermediate TH1121 Hinge

    Male mounting bracket measures 1-5/16” wide by 2-3/16” high, with a hole spacing of 13/16”.  Female mounting leaf measures 1-7/16” high by 1-9/16”, with a hole spacing of 3/4” center to center. These hinges are non handed.

     

    TH1121
    As low as $34.65
  28. Ives 7212 Pivot Set

    • Handed
    • Top, header mount
    • Bottom, jamb mount
    • Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2"
    • Maximum door load 200 pounds
    • Vertical adjustment range 3/16", with positive locking

    Handing diagram

    7212
    As low as $309.70
  29. Ives 7212INT Intermediate Pivot

    • Use with 7212, 7212V or 7222 3/4 Offset Pivot
    • Handed
    • Vertical adjustment 3/16", include positive locking.

    Handing diagram

    7212INT
    As low as $232.56
  30. Ives 7222 Pivot Set

    • Handed
    • Top, header mount
    • Bottom, base plate mount
    • Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2"
    • Maximum door load 200 pounds
    • Vertical adjustment range 3/16", with positive locking

    Handing diagram

    7222
    As low as $303.85
  31. Ives 7222INT Intermediate Pivot

    • Use with 7212, 7212V or 7222 3/4 Offset Pivot
    • Handed
    • Vertical adjustment 3/16", include positive locking.

    Handing diagram

    7222INT
    As low as $232.56
  32. Reinforcing Pivot Hinge 4"

    Reinforcing Pivot Hinge 4" - for use with a 4" wide butt hinge

    1/2" to center line of 4" hinge.
    Used to strengthen and reduce vibration
    to your current full mortise butt hinges.
    Made of Zinc Plated Steel

    These hinges are not longer handed. Please select hand when checking out, until our system is updated.

     

    DX1921
    As low as $81.09
  33. Reinforcing Pivot Hinge 4-1/2"

    Reinforcing Pivot Hinge - For use with 4-1/2" wide butt hinges

    3/4" to center line of 4-1/2" hinge pin.
    Pin uses large pin and bushing.
    Used to dampen vibration and increase
    strength to your full mortise butt hinges.
    Constructed of heavy duty cold rolled steel.
    Made of Zinc Plated Steel
    Supports weights up to 300 lbs

    Manufacturer part # B1923
    Our part # DR1923 for Right Hand, DL1923 for Left Hand

    These hinges are no longer handed, you can select right or left, but the hinges will work both ways.

    B1923-
    As low as $70.07
  34. Reinforcing Pivot Hinge

    The reinforcing pivot hinge is a good way to solve door sag issues. And also be a preventative solutions for future isses with extra heavy or wide doors. The hinges comes in two sizes 4 or 4.5 inches, and two finishes, prime coat and satin chrome. The hinge uses a heavy duty ball-bearing to add extra life.  The base metal is steel.

    GBB85
    As low as $27.50
  35. Rixson 117-1/4 Pivot Set

    Application
    Interior Doors
    Weight to 250 lbs.*
    Door Width up to 3'6"(1067mm)
    Includes 180 Top Pivot
    Handed

    Handing diagram

    right hand left hand diagram

    Plated Door Finishes

    117-1/4
    As low as $460.08
View as Grid List

Items 1-36 of 41

per page
Set Descending Direction
Page