Door Pull Handles

Our foot door pulls are perfect to help prevent the spread of germs and other harmful microbes. We offer a wide range of pull handles that you can use to outfit any door or entryway in your building. Our pull handles can even be mixed and matched with any pull plates available on our site, so you can create a custom look that will set your business apart. We’ve been offering a full selection of pull handles since 1970. Give us a call and talk to our expert sales team to get started today.

Filter
View as Grid List

27 Items

per page
Set Descending Direction
  1. Handicap Door Pull 19

    With the Handicap Door Pull 19 you are able to get a closed fist behind the pull, which makes it a great ADA Door Pull. Constructed of cast aluminum or cast brass and plated to the desired finish.  The overall length is 8-3/4", the bases are 1-1/2" x 1-5/8", and it projects 3-1/4".   Shipped with screws. Also known as a Double Arm Pull, Handicap Grip, ADA Door Pull or Handle.

    Plated Door Finishes

    GHP000-
    As low as $66.62
  2. Handicap Door Pull 18

    With the Handicap Door Pull 18 you are able to get a closed fist behind the pull, which makes it a great ADA Door Pull. Shipped with screws. Also known as a Single Arm Pull, Handicap Grip, ADA Door Pull or Handle.  The handle is constructed of cast aluminum, or brass and then plated. The base plate measures 1-3/4" by 2-3/4", the handle projects our 3-1/2".  Ships with #6 by 5/8" matching finish sheet metal screws.

    Plated Door Finishes

    GHP200-
    As low as $61.01
  3. Handicap Door Pull 119

    With the Handicap Door Pull 119 you are able to get a closed fist behind the pull, which makes it a great ADA Door Pull. Also known as the Double Arm Pull it is constructed of aluminum, brass or stainless steel stock.   It measures 8-1/2" overall length and has 5-1/4" centers on the mounting screws.  The flat bar stock is 3/8" x 1", and the round mounting post is 3/4" diameter.  Shipped with screws and finish washers. Also known as a Handicap Grip, ADA Door Pull or Handle.

    Plated Door Finishes

    GHP300-
    As low as $53.76
  4. Hands-Free or Foot Door Pull BM46

    The Hands-Free/Foot Door Pull BM46 can be used as a ADA compliant hands-free door pull when mounted 42" above the finished floor. Or as foot pull when mounted at the bottom of the door. The Pull is 4" x 5" and is made of .090 thick stainless steel. Ships with sex bolts and screws for 1-3/4" door. Available in Brushed Stainless Steel, Flat Black Powder Coat and Dark Bronze Powder Coat.

    GBM46-
    As low as $59.78
  5. Handicap ADA Hands-Free Door Pull BM4511

    The Handicap ADA Hands-Free Door Pull BM4511 is an ADA compliant. You can hook your forearm/wrist into the open end to open a non-latching door. The pull is constructed of stainless steel and is available in brushed stainless steel, powder coated flat black or powder coated dark bronze. The plate measures 4 x 16 inches and the grip is tack-welded to the plate and also has a 5/16-18 thread for thru bolting. The grip is 1-1/4 diameter by 8 inches. Ships with 6 mounting screws and one 5/16-18 thru bolt with finished washer in matching finish.

    GBM4511-
    As low as $192.60
  6. Hands Free Foot Operated Door Pull

    The Hands Free Foot Operated Door Pull is a low cost solution to keep your hands off of high traffic handles. It is constructed of cast aluminum, and measures 4" wide by 1-7/32" high with a 2-3/8" projection. The package includes fasteners, door decal and installation tool.

    G131520
    $19.93
  7. Door Step N Pull

    Step N Pull®

    Stop the spread of germs with this ingenious product. Simple step on the plate and pull the door without grabbing the door pull.

    Includes:

    1. One StepNpull®
    2. Required mounting screws
    3. Two stickers, one for the door and the other for the mirror, paper towel dispenser or hand dryer. Actual dimensions are 5"x4"

    Currently we only have Aluminum in stock.
    Available in Aluminum, Gold or Copper Finish-See Color under "More Views"

      GSNP-
      As low as $43.84
    1. Door Pull 25 3/4" Diameter

      The Door Pull 25 is made of 3/4" round stock in either solid, Aluminum, Brass or Stainless Steel. The handle has a 2-3/8" projection from the door, and 1-5/8" clearance from the door to the back of the handle.  It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Door Handle or Door Grip.

      Plated Door Finishes

      GHE25
      As low as $21.92
    2. Door Pull 26 1" Diameter

      The Door Pull 26 is made of 1" round stock in either solid, aluminum, brass or stainless steel. The handle has a projection of 2-3/4", and clearance of 1-3/4". It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Door Handle or Door Grip.

      Finishes

      8" GDP810
      10" GDP101
      12" GDP121

      Plated Door Finishes

      GHE26
      As low as $35.07
    3. Door Pull Offset 3/4" Diameter 29

      The Door Pull Offset 3/4" Diameter #29 is constructed of either solid, Aluminum, Brass or Stainless Steel. The handle 3/4" diameter tubing with a 2-1/2" projection and 2-1/2" offset.  We find these on narrow stile aluminum framed glass storefront doors.  It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Door Handle or Door Grip.

      Plated Door Finishes

      GHE29
      As low as $51.43
    4. Door Pull Offset 1" Diameter 39

      The Door Pull Offset #39 Handle is constructed of either solid aluminum, brass or stainless steel.  The handle is 1" diameter tubing with a 2-3/4" offset and 2-3/4" projection.  This is the most common type of handle you use today.  Just about every aluminum framed storefront door has a version of this handle.  This handle is available in 8", 10", 12" and 18" centers on the mounting holes.  If you have a 9" centered handle use the PH-4000.   It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Offset Door Handle or Door Grip, and Storefront door handle.1" diameter material

      Plated Door Finishes

      GHE39
      As low as $56.46
    5. Door Pull Offset 1" Diameter PH-4000

      The Door Pull Offset 1" Diameter PH-4000 is usually used on aluminum frame glass doors. This handle offers three different mounting options, one is surface mounted, where the handle is mounted over a mounting stud and then you tighten the set screw to hold the handle in place. The second method is thru bolted, the bolt goes all the way thru the door. And the third is back to were you have two handles mounted back to back.  This handle projects 3-1/4", has a 2-1/4" door clearance, comes in 9", 10" and 12" centers.  One of the most popular handles we sell.

      PH-4000-
      As low as $57.46
    6. Door Pull Handle 10

      The Door Pull Handle 10 has 5-1/2" center to center screw spacing. The base is 3/4" diameter, the overall lenght is 6-1/4". The projection is 2" and the clearance is 1-1/2". Also known as a Door Handle or Door Grip. This handle ships with thru bolts and finish washers.

      Plated Door Finishes

      GHE10-
      As low as $21.92
    7. Door Pull Handle 11

      The Door Pull Handle 11  has 8" center to center screw spacing. The base is 3/4" diameter, the overall lenght is 9-1/4". The projection is 2-1/8" and the clearance is 1-1/2". Also known as a 8" Center Door Grip or Door Handle. This handle is shipped with thru bolts and finish washers.

      Plated Door Finishes

      GHE11-
      As low as $35.07
    8. Door Pull Handle 12

      The Door Pull Handle 12 has a 5-1/2" centers hole spacing and is 6" overall. It has 2" projection with 1-3/8" clearance and the base is 5/8" x 1-1/4". Also known as a Door Handle or Door Grip. Shipped with thru bolts and finish washers.

      Plated Door Finishes

      GHE12-
      As low as $48.51
    9. Door Pull Handle 14

      The Door Pull Handle 14 has 5-1/2" centers on the mounting screws. And has a 2" diameter base. It features a 2-1/4" projection with a 1-1/2" clearance. Also known as a Door Handle or Door Grip. The handle ships with thru bolts and finish washers.

      Plated Door Finishes

      GHE14-
      As low as $25.71
    10. Door Pull Handle 15

      The Door Pull Handle 15 features 7-1/2" centers on the mounting screws. With 2" diameter bases. The Grip has a 2-1/4" projection with a 1-5/8" clearance. Also known as a Door Handle or Door Grip. This handle ships with thru bolts and finish washers.

      Plated Door Finishes

      GHE15-
      As low as $37.40
    11. Door Pull Handle 16

      The Door Pull Handle 16 has an overall length of 7-1/2". The base diameters are 2" with three holes each. The handle projects out 2-1/4" and has a clearance of 1-1/2". Also known as a Door Grip or Door Handle. This handle ships with 6 wood/sheet metal screws.

      Plated Door Finishes

      GHE16-
      As low as $25.71
    12. Door Pull Handle 17

      The Door Pull Handle 17 has an overall length of 10". The base diameters are 2" with three holes each. The handle projects out 2-1/4" and has a clearance of 1-1/2". Also known as a Door Grip or Door Handle. This handle ships with 6 wood/sheet metal screws.

      Plated Door Finishes

      GHE17-
      As low as $37.40
    13. Door Pull Handle 21

      The Door Pull Handle 21 has a cross section dimension of 1/2" x 1" and is made of half round (underside is round) stock. The handle projects out 2-1/8" with a clearance of 1-5/8". This handle is available in 6" and 8" center to center mounting holes, but can be made in different Center to Center dimensions. This product is also known as a Door Handle or Door Grip. The handle ships with thru bolts and matching finish washers.

      Plated Door Finishes

      GHE21
      As low as $23.37
    14. Door Pull Handle 22

      The Door Pull Handle 22 features an opened end and a closed end pull. This Door Pull is also known as a Door Handle or Door Grip. The dimensions are 14" overall length, 8" centers, with a 3/8" by 1-1/4" handle cross section.   The mounting posts have a 1" diameter, and the handle projects out 1-7/8".  The handle ships with thru bolts and finish washers.  It is constructed of aluminum, stainless steel or brass depending on the finish you are looking for.

      Plated Door Finishes

      GHE22-
      As low as $64.29
    15. Door Pull Handle 23

      The Door Pull Handle 23 features two closed ends. This Door Pull is also known as a Door Handle or Door Grip. The dimensions are 14" overall length, 8" centers, with a 3/8" by 1-1/4" handle cross section.   The mounting post has a 1" diameter, and the handle projects out 1-7/8".  The handle ships with thru bolts and finish washers.  It is constructed of aluminum, stainless steel or brass depending on the finish you are looking for.

      Plated Door Finishes

      GHE23-
      As low as $70.13
    16. Door Pull Handle 24

      The Door Pull Handle 24 features a 5-1/2" center to center screw spacing. The handle is constructed of aluminum, stainless steel or brass depending on the desired finish.  The handle is 1" solid diameter stock and the mounting posts are 3/4" diameter stock.  It measures 8" overall length and projects from the door 2".  It ships with thru bolts and finish washers. Also known as a Door Handle or Door Grip.

      Plated Door Finishes

      GHE24-
      As low as $81.82
    17. Door Pull Handle 42

      Door Pull 42

      4-1/4" x 8-3/4" size
      6-3/4" centers
      1-3/8" x 8-3/4" base
      2-1/4" projection

      Plated Door Finishes

      GHE42-
      As low as $99.35
    View as Grid List

    27 Items

    per page
    Set Descending Direction