|Plate Size||6 x 28 inches|
|Availability||1 Week Lead Time|
|Special Shipping Type||N/A|
Polished Brass Door Kick Plate : 6" x 28"
The standard Polished Brass is a solid brass kick plate that is polished and then clear coated to prevent oxidation. These plates are 16 gauge or .050" thick. A draw back of the Polished Brass Plates is oxidation. If the plate becomes scratched or dented, there is a good probability that the clear coat delaminates and moisture could get under the surface. When this happens, the plate will tarnish. The brass base material is softer, so the chances of them becoming scratched or dented in commercial applications is pretty high. You might want to consider Lifetime Brass, which are the same cost per square inch.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut brass screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Custom sizes are available, they run about $0.23 per square inch.
Please allow 1 week shipping time