Burns Manufacturing

The Push Bar w/Handle 422X26 is usually found aluminum framed glass store front doors.  It is constructed of 1" diameter solid aluminum, brass, bronze or stainless steel, depending on the finish.  The handle or grip will have either a 8", 10", 12" or 18" center to center screw spacing.  The push bar center to center length is determined by you, we can do any reasonable size.  Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door.  All the fasteners are included, and are determined by the material your door is made of (wood or metal).   Please allow 3-4 weeks on the Dark Bronze and Aluminum, and 2 weeks on the other finishes.

Finishes

The Push Bar W/Offset Grip 422X39 is usually found aluminum framed glass store front doors.  It is constructed of 1" diameter solid aluminum, brass, bronze or stainless steel, depending on the finish.  The handle or grip will have either a 8", 10", 12" or 18" center to center screw spacing.  The push bar center to center length is determined by you, we can do any reasonable size.  Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door.  All the fasteners are included, and are determined by the material your door is made of (wood or metal).   Please allow 3-4 weeks on the Dark Bronze and Aluminum, and 2 weeks on the other finishes.

Finishes

The Anodized Aluminum Door Kick Plate-34 x 34 inches are the most cost effective, least expensive. The aluminum plates are 16 gauge, or .050" thick. They have an anodized finish to resist corrosion and we find these in many commercial buildings through out the United States.

Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".

Please allow for a 1 week lead time. Custom sizes are available, and run about $0.07 per square inch.

Finishes

The Door Push Plate 61 is constructed of 16 gauge stainless steel, aluminum, brass or bronze.  This plate is handed left and right, the one shown on the website is a Left Hand plate.  They measure 7-1/2" wide by 15" long, and ships with the matching finish mounting screws.

Finishes

The Door Push Plate 62 is constructed of 16 guage (.050") thick aluminum, stainless steel, brass or bronze depending on your finish.  They measure 7-1/2" by 15" tall.  This plate is handed left and right, the one shown on the website is a Left Hand.  Plate comes with matching finish mounting screws.

Finishes

STAINLESS STEEL KICK PLATE BRUSHED 18 GAUGE

Brushed Stainless Steel Kick Plate US32D18 Ga (.037")
Custom sizes available starting around $0.10 per square inch depending quantity

Please allow 1 week shipping time

Kick Plates come pre drilled with screws

Finishes

Polished Brass Door Kick Plate : 8" x 34"

The standard Polished Brass is a solid brass kick plate that is polished and then clear coated to prevent oxidation. These plates are 16 gauge or .050" thick. A draw back of the Polished Brass Plates is oxidation. If the plate becomes scratched or dented, there is a good probability that the clear coat delaminates and moisture could get under the surface. When this happens, the plate will tarnish. The brass base material is softer, so the chances of them becoming scratched or dented in commercial applications is pretty high.  You might want to consider Lifetime Brass, which are the same cost per square inch.

Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut brass screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".

Custom sizes are available, they run about $0.23 per square inch.

Please allow 1 week shipping time

Finishes

Our Dark Bronze Oil Rubbed Bronze Door Kick Plates (US10B) are a baked on powder coat on brass base metal. We switched to this finish 5 years ago due to color variations in the US10B Oil Rubbed Bronze finishes. The US version was much lighter than the Asian version, which is where most the door hardware is made these days. The cost of Oil Rubbing was going through the roof and many platers were having issue with the environmental impact and EPA regulations in the United States. Our Oil Rubbed Kick Plates are 16 gauge (.050″) thick.

Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut dark brown screw. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.

You can order these plates with tape mounting, but on larger plates, it is not recommended. Large plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and some C Clamps with the door on saw horses.

Custom sizes available starting around $0.49 per square inch depending quantity

Please allow 2 week shipping time

Oil Rubbed Bronze US10B (Dark Bronze)
Solid brass plated with in oil rubbed bronze
16 Ga (.050")
Custom sizes available starting around $0.27 per square inch depending quantity

Please allow 1 week shipping time

Finishes

Oil Rubbed Bronze US10B (Dark Bronze)
Solid brass plated with in oil rubbed bronze
16 Ga (.050")
Custom sizes available starting around $0.27 per square inch depending quantity

Please allow 1 week shipping time

Finishes

Oil Rubbed Bronze US10B (Dark Bronze)
Solid brass plated with in oil rubbed bronze
16 Ga (.050")
Custom sizes available starting around $0.27 per square inch depending quantity

Please allow 1 week shipping time

Finishes

Satin Nickel Door Kick Plate : 8" x 34" Satin Nickel

The Satin Nickel is a popular finish we have been seeing the last 15 years. The Satin Nickel Door Kick Plates are a solid brass plate that is Nickel Plated and then brushed to give it the Satin or Brushed look. These plates are 16 gauge or .050″ thick. 


Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.   You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.  Custom sizes available starting around $0.28 per square inch depending quantity
.  Please allow 1 week shipping time.

Satin Nickel Door Kick Plate : 6" x 34" Satin Nickel

The Satin Nickel is a popular finish we have been seeing the last 15 years. The Satin Nickel Door Kick Plates are a solid brass plate that is Nickel Plated and then brushed to give it the Satin or Brushed look. These plates are 16 gauge or .050″ thick. 


Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.   You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.  Custom sizes available starting around $0.28 per square inch depending quantity
.  Please allow 1 week shipping time.

Satin Nickel Door Kick Plate : 8" x 32" Satin Nickel

The Satin Nickel is a popular finish we have been seeing the last 15 years. The Satin Nickel Door Kick Plates are a solid brass plate that is Nickel Plated and then brushed to give it the Satin or Brushed look. These plates are 16 gauge or .050″ thick. 


Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.   You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.  Custom sizes available starting around $0.28 per square inch depending quantity
.  Please allow 1 week shipping time.

Satin Nickel Door Kick Plate: 8" x 30" Satin Nickel
The Satin Nickel is a popular finish we have been seeing the last 15 years. The Satin Nickel Door Kick Plates are a solid brass plate that is Nickel Plated and then brushed to give it the Satin or Brushed look. These plates are 16 gauge or .050″ thick. 


Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.   You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.  Custom sizes available starting around $0.28 per square inch depending quantity
.  Please allow 1 week shipping time.

Satin NIckel Door Kick Plate : 8" x 28" Satin Nickel
The Satin Nickel is a popular finish we have been seeing the last 15 years. The Satin Nickel Door Kick Plates are a solid brass plate that is Nickel Plated and then brushed to give it the Satin or Brushed look. These plates are 16 gauge or .050″ thick. 


Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.   You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.  Custom sizes available starting around $0.28 per square inch depending quantity
.  Please allow 1 week shipping time.

Push Bar Adjustable 451

Finishes:
US3/605 polished brass
US4/606 brushed brass
US10B/613 dark bronze
US26/625 polished chrome
US26D/626 brushed chrome

Material: Brass
Material Size 5/8" round tube adjustable to 36"
Base: 5/8" x 5-5/8"
Clearance: 1/2"
Projection: 1-1/8"

Push Bar Adjustable 454

Finishes:
US26/625 polished chrome
US26D/626 brushed chrome
US3/605 polished brass
US4/606 brushed brass

Material: Brass
Material Size: 1" round tube adjustable up to 36"
Base: 2" round x 2-1/2"
Clearance: 1-1/2"
Projection: 2-1/2"

Trim Protector Bar

A great product for applications were your door knobs and levers are getting damaged due to hand carts and other items hitting door trim. Mount this product above or below existing items on walls and doors to protect and sheild them from damage.

Material: Brass, Bronze, Stainless Steel
Material Size: 3/8" x 1-1/2"
Base: 1-3/4" x 3-1/2"
Projection: 3-1/4"

The Lifetime Polished Brass Door Kick Plate 8 x 30 inches has a 16 gauge (.050" thick) base metal, that is then plated with a artificial brass finish that is then polished.  The process is called Poly Vapor Deposition or PVD, which is why we hear the name Lifetime Polished Brass Kick Plate PVD.  Because the finish is an artificial brass, it does not have to be clear coated, so it will never tarnish.  The Lifetime Polished Brass finish cost the same as the Solid Brass Polished Kick Plates. Custom sizes are available starting around $0.23 per square inch depending quantity.  Kick Plate comes with screws for mounting.  Please allow 1 week shipping time.

The Lifetime Polished Brass Door Kick Plate 8 x 32 inches has a 16 gauge (.050" thick) base metal, that is then plated with a artificial brass finish that is then polished.  The process is called Poly Vapor Deposition or PVD, which is why we hear the name Lifetime Polished Brass Kick Plate PVD.  Because the finish is an artificial brass, it does not have to be clear coated, so it will never tarnish.  The Lifetime Polished Brass finish cost the same as the Solid Brass Polished Kick Plates. Custom sizes are available starting around $0.23 per square inch depending quantity.  Kick Plate comes with screws for mounting.  Please allow 1 week shipping time.

The Lifetime Polished Brass Door Kick Plate 8 x 34 inches has a 16 gauge (.050" thick) base metal, that is then plated with a artificial brass finish that is then polished.  The process is called Poly Vapor Deposition or PVD, which is why we hear the name Lifetime Polished Brass Kick Plate PVD.  Because the finish is an artificial brass, it does not have to be clear coated, so it will never tarnish.  The Lifetime Polished Brass finish cost the same as the Solid Brass Polished Kick Plates. Custom sizes are available starting around $0.23 per square inch depending quantity.  Kick Plate comes with screws for mounting.  Please allow 1 week shipping time.

The Lifetime Polished Brass Door Kick Plate 10 x 34 inches has a 16 gauge (.050" thick) base metal, that is then plated with a artificial brass finish that is then polished.  The process is called Poly Vapor Deposition or PVD, which is why we hear the name Lifetime Polished Brass Kick Plate PVD.  Because the finish is an artificial brass, it does not have to be clear coated, so it will never tarnish.  The Lifetime Polished Brass finish cost the same as the Solid Brass Polished Kick Plates. Custom sizes are available starting around $0.23 per square inch depending quantity.  Kick Plate comes with screws for mounting.  Please allow 1 week shipping time.

The Brushed Brass Door Kick Plates are the same as the Lifetime Polished Brass Door Kick Plates, solid stainless steel base metal, 16 gauge (.050" thick), but the surface is Satin or Brushed.  Because it is an artifical finish they will not tarnish.  Custom sizes available starting around $0.41 per square inch depending quantity.  Kick Plate comes with screws for mounting.  Please allow 1 week shipping time.

Brushed Brass Kick Plate US4 -16 Ga (.050")
Solid brass plate with brushed finish, then clear coated

Custom sizes available starting around $0.25 per square inch depending quantity

Kick Plate comes with screws for mounting

Please allow 1 week shipping time

Finishes

Brushed Brass Kick Plate US4 -16 Ga (.050")
Solid brass plate with brushed finish, then clear coated

Custom sizes available starting around $0.25 per square inch depending quantity

Kick Plate comes with screws for mounting

Please allow 1 week shipping time

Finishes

The Brushed Bronze Door Kick Plates are solid bronze plates that are finished in a Satin or Brushed finish and then clear coated.  The Bronze Kick Plates are similar to the Brass Kick Plates, but they have more of an orange hue, were as the brass plates have a yellow hue.  This was a very popular finish in the 1950's, 60's and early 70's.  Custom sizes are available starting around $0.49 per square inch depending quantity.  Kick Plates come pre drilled with screws.  Please allow 2 week shipping time.

Brushed Bronze Kick Plate US10 (Bronze), also know as 612
Solid bronze plate with in a brushed finish, and is then clear coated.
16 Ga (.050") Thick

This finish was really popular in the 1940 thru the early 1970's. It is an orangish hue brass color.

Custom sizes available starting around $0.27 per square inch depending quantity

Kick Plates come pre drilled with screws.

Please allow 2 week shipping time

Finishes

Brushed Bronze Kick Plate US10 (Bronze), also know as 612
Solid bronze plate with in a brushed finish, and is then clear coated.
16 Ga (.050") Thick

This finish was really popular in the 1940 thru the early 1970's. It is an orangish hue brass color.

Custom sizes available starting around $0.27 per square inch depending quantity

Kick Plates come pre drilled with screws.

Please allow 2 week shipping time

Finishes

Aluminum Diamond Plate Kick Plate

Aluminum base material that has a polished chrome look with the diamond plate pattern. Diamonds are 1-1/8" long.
Custom sizes are available, they run about $0.22 per square inch

.125" thick

Please allow 7-10 days for delivery

Aluminum Diamond Plate Kick Plate

Aluminum base material that has a polished chrome look with the diamond plate pattern. Diamonds are 1-1/8" long.
Custom sizes are available, they run about $0.22 per square inch

.125" thick

Please allow 7-10 days for delivery

Aluminum Diamond Plate Kick Plate

Aluminum base material that has a polished chrome look with the diamond plate pattern. Diamonds are 1-1/8" long.
Custom sizes are available, they run about $0.22 per square inch

.125" thick

Please allow 7-10 days for delivery

The Concealed Mount Push and Pull Plate Sets feature an 1/8 inch push plate with a 1/20 inch plate plate. The handle is surface mounted with thru mounted studs. 8 inch center handles are 3/4 inch diameter, 10 in and 12 inch center handles are 1 inch diameter.

ADA Sliding and Barn Door Push/Pull Set. Pull handle is 3/4" round stock with 6" center to centers and 2-1/2 inch clearance.  The flush pull is 4" x 7" x 1-1/8 inch ADA.