Parts| Von Duprin Exit Devices

When you purchase panic and exit devices from RBA Door, every product will meet local building codes as well as your expectations for performance and quality. All panic device hardware and accessories are built with durability, convenience and value in mind. No matter the project, our panic devices are a well-built choice at a reasonable price.

Filter
View as Grid List

Items 37-72 of 199

per page
Set Descending Direction
  1. Von Duprin Dogging Adaptor 090043

    The Von Duprin Dogging Adapter 090043 is the piece that the 090042 and 090040 fit through and lock in place.  These piece very rarely has to be replaced.  The Shaft 090040 is usually the part you need to replace.  We sell these individually.

    G090043
    $12.13
  2. Von Duprin Dogging Hook 090044

    The Von Duprin Dogging Hook 090044 is the piece that grabs the push bar mechanism and keeps it in the dogged position.  The does wear out, but it takes a long time.  This piece is used on the 22, 33A, 35A, 98 and 99 series devices made after 1997.  We sell this part individually and it is #5 on the diagram.

    G090044
    $9.94
  3. Von Duprin 22 Mechanism End Cap 900981

    The Von Duprin 22 Mechanism End Cap 900981 is the end cap and bracket that ships with the 22 and 2227 series.  The bracket is constructed of zinc plated steel and the end cap is black plastic. Bracket also acts as mounting bracket that holds the exit device on the door.  Von Duprin does offer a new Metal End Cap, look under related products.

    Von Duprin part # 900981

    G22R10
  4. Von Duprin 22 End Cap Only 968601

    The Von Duprin 22 End Cap Only 968601 is the end cap that goes on the hinge side of the door. When the cap breaks off the Dogging Cover Plate just slides off. Works on all of the Von Duprin 22 exit devices. If you need the bracket also, please order part # G22R10. Black plastic construction. As of October 1, 2014, Von Duprin no longer sells just the Plastic Cap Only. The complete End Cap and Bracket 900981 will be shipped in its place.

    Von Duprin Part # 968601

    G22R25
  5. Von Duprin 22 Rim Center Case Cover 968603

    The Von Duprin 22 Rim Center Case Cover 968603 is for use on the 22 rim devices.  The cover comes with mounting screws and is available in aluminum SP-28 or dark brown SP-313.

    Von Duprin part # 968603 SP28 or SP313

    Von Duprin 22 Colors

    G22R30
    As low as $66.12
  6. Von Duprin 22 Center Case 109012

    The Von Duprin 22 Center Case 109012 has been around for almost 40 years.  This case will replace all of the non fire rated center cases, meaning all of the devices that have a hex key dogging assembly on the hinge side cover plate.

    Von Duprin Part # 109012

    G22R40
    $283.34
  7. Von Duprin 22 Control Link Pin 050529

    Von Duprin 22 Control Link Pin

    The control link pin is the connector pin, that connects the latch head assembly to the push bar assembly. When the push bar is pushed in it retracts the latch bolt and the pin connects the two pieces. This Control Link Pin is used on the Von Duprin 22, 33A, 98 and 99 Panic Devices.

    VON DUPRIN PART # 050529
    Old Von Duprin Part # 969520

    G22R60
    $16.61
  8. Von Duprin 22 Cover Plate 968595 968596

    Von Duprin 22 Cover Plate 968595 968596

    Von Duprin 22 Dogging Cover Plate. Plate covers the dogging assy, or hinge side of the exit device. This plate sides off when the plastic end cap breaks or goes missing.

    Von Duprin Part # 968595   measures 10-3/4" Long  for 3' devices
    Von Duprin Part # 968596   measures 16-3/4" Long  for 4' devices

    G22R90-
    As low as $67.65
  9. Von Duprin 2227 Center Case Cover 968888

    The Von Duprin 2227 Center Case Cover 968888 comes in an Aluminum SP-28 or Dark Brown SP-313 color.  This piece is for used on the 2227 Surface Vertical Rod Panic Hardware.  Package also included mounting screws.

    Von Duprin Part # 968888

    Von Duprin 22 Colors

    G22VR100-
    As low as $73.44
  10. Von Duprin 2227 Bottom Vertical Rod 109362

    The Von Duprin 2227 Bottom Vertical Rod 109362 has a length of 33-1/4" to 33-1/2" that is set at the factory.  All the bottom rods are the same length because of ADA standards. The top rods are field adjustable.

    Von Duprin part # 109362

    Von Duprin 22 Colors

    G22VR110-
    As low as $136.46
  11. Von Duprin 2227 Bottom Latch 050090

    The Von Duprin 2227 Bottom Latch 050090 replaces and updates all 2227 bottom latches to the new style if you device was shipped before October 1998. If your device was shipped after October 1998 then use the G050401.

    Includes screws and bracket

    Von Duprin Part # 050090

    G22VR120
  12. Von Duprin 2227 Top Latch 050091

    The Von Duprin 2227 Top Latch 050091 latch is used on devices shipped before October 1998, see related products for the new style latch if your device is newer. This is usually the problem if your bottom rod is dragging on the floor.  Latch measures:   1-1/16" wide x 4-5/16" long (less latch bolt) x 1-7/8" projection at the highest point.  Includes screws.

    Von Duprin Part # 050091

    G22VR10
  13. Von Duprin 2227 Latch Covers 050566

    The Von Duprin 2227 Latch Covers 050566 is used on the top and bottom latches.  Package includes mounting screws

    Von Duprin part # 050566

    Von Duprin 22 Colors

    G22VR30-
    As low as $71.24
  14. Von Duprin 2227 Top Vertical Rod 109361

    The Von Duprin 2227 Top Vertical Rod 109361 will work on all 2227's up to door heights of 7'1".  The actual length of the rod is 37-3/8", less the fittings.  If your door is taller you will need a rod extension.  Call 1-800-642-2403 for longer top rods or rod extensions.

    Von Duprin part # 109361

    Von Duprin 22 Colors

    G22VR60-
    As low as $126.35
  15. Von Duprin 2227 Rod Guides Assembly 112063

    The Von Duprin 2227 Rod Guides Assembly 112063 works on all of the Von Duprin 2227's, and replaces the older style that featured the plastic cap and the springs.  This device is used to add strength and rigidity to the top and bottom rods on there surface vertical rod.

    Von Duprin part # 112063

    Von Duprin 22 Colors

    G22VR80-
    As low as $67.65
  16. Von Duprin Exit Device 2227 Center Case 109358

    The Von Duprin Exit Device 2227 Center Case 109358 replaces worn out Von Duprin 2227 Surface Vertical Rod Center Cases.  The center case has been the same for the last 30 years.

    Von Duprin Part # CASE.107
    Old Von Duprin Part # 109358

    G22VR90
    $251.60
  17. Von Duprin Exit Device 5547 Blind Fastener Kit 900539

    The Von Duprin Exit Device 5547 Blind Fastener Kit 900539 is used to connect the Rod Control Housing to the Rods.  This part is used on the 5547 Concealed Vertical Rod only.

    Von Duprin Part # 900539

    G900539
    $44.50
  18. Von Duprin 880/990 Trim Hex Stud 956760

    Von Duprin 880/990 Trim Hex Stud

    This is the Hex Stud used on the 880 and 990 Trim Plates. The threads are 7/32-24. Overall lenght is 2"

    Von Duprin Part # 956760

    G956760
    $12.27
  19. Von Duprin 99 Mechanism End Cap 050014

    The Von Duprin 99 Mechanism End Cap 050014, also known as 33A/35A/98/99/330/350 Impact Resistant End Cap Kit.  Replaces all of the old versions of the 98/99 End Caps, the mounting holes may be different.  Includes end cap, bracket and all screws

    Von Duprin Part # 050014

    Plated Door Finishes

    G99R10-
    As low as $92.70
  20. Von Duprin 99 Rim Center Case 050020

    The Von Duprin 99 Rim Center Case 050020 replaces all previous versions of the Von Duprin 98/99 Rim Device Center Cases. One of the best things about a Von Duprin is when they redesign a part, they make it so your old device is not obsolete and you can update your device.  All internal parts, springs, screws and cover mounting bracket included.

    Von Duprin Part # 050020

    G99R15
    $462.26
  21. Von Duprin 99 Rim Center Case Cover 050071

    The Von Duprin 99 Rim Center Case Cover 050071 replaces your old 1 or 3 piece covers.  Included in the package is the cover and the mounting screws.

    Von Duprin part # 050071

    Plated Door Finishes

    G99R20-
    As low as $164.03
  22. Von Duprin 99 Cover Plate 050114

    The Von Duprin 99 Cover Plate 050114 is for use on the  33A, 35A, 98 and 99 devices.  Covers the dogging assembly on the hinge side of the door. The usually fall off when the End Cap is not on the exit device.  Von Duprin is only shipping a 20-1/2" cover plate now, which will work on 3' and 4' doors, you will have to cut more off if you have a 3' device with a hack saw or chop saw.

    Von Duprin Part # 050114 and 050117 Hex Key Dog Conversion Kit

    Von Duprin 99 Cover Plate 050114

    Plated Door Finishes

    G99R50
    As low as $87.70
  23. Von Duprin 99 Stock Absorber 050491

    Von Duprin 33/35/98/99 push bar stock absorbers. This is the piece that makes these Von Duprin exit devices one of the quietest devices made.

    Von Duprin Part # 050491

    G99RABS
    $43.07
  24. Von Duprin 9927 Top Latch 050091

    The Von Duprin 9927 Top Latch 050091 used on all the Von Duprin 9827 and 9927's. Replaces and updates all 9827 and 9927 bottom latches to the new style, if your device was installed before October 1998. If your device is newer then October 1998, then use the G050400.  This is usually the problem if your bottom rod is dragging on the floor. Latch measures:   1-1/16" wide x 4-5/16" long (less latch bolt) x 1-7/8" projection at the highest point.  Includes screws.

    Von Duprin Part # 050091

    G99VR10
  25. Von Duprin 9927 Latch Covers 050566

    Von Duprin 9927 Latch Covers.

    This cover is used on the 2227, 3327A, 3427A, 9827 and 9927 Exit Devices. Replace old bent and worn covers with brand new ones.

    Includes mounting screws

    Von Duprin Part # 050566

    Other finishes are available

    Plated Door Finishes

    G99VR20-
    As low as $71.24
  26. Von Duprin 9927 Top Vertical Rod 110573

    The Von Duprin 9927 Top Vertical Rod 110573 is the standard top rod for door heights up to 7'1".  The length of this rod is 35", less the fittings.  For larger doors you can order a Rod Extension Kit, which at this point we do not have online.  The rod is field adjustable if your doors are less then 7'1".  The Old Von Duprin part # is 110573, and the Newer Von Duprin part # is 050512.

    Plated Door Finishes

    G99VR30-
    As low as $109.15
  27. Von Duprin 9927 Rod Guide Assembly 112063

    The Von Duprin 9927 Rod Guide Assembly 112063 works on all of the Von Duprin 98 and 9927's. The guide keeps the rods from bowing or getting bent by hand carts, or rowdy patrons.  Replaces the old style which had the cover and springs.

    Von Duprin part # 112063

    Plated Door Finishes

    G99VR35-
    As low as $67.65
  28. Von Duprin 9927 Center Case 050021

    The Von Duprin 9927 Center Case 050021 center case replaces all earlier versions of the 9827 and 9927 Center Cases. Everything shown in the picture is included with the product. Along with all the mounting screws.

    Von Duprin part # 050021

    G99VR40
    $273.39
  29. Von Duprin 9927 Center Case Cover 050072

    The Von Duprin 9927 Center Case Cover 050072 replaces your old 1 or 3 piece cover.  The Von Duprin Cover comes with mounting bracket and all screws.

    Von Duprin part # 050072

    Plated Door Finishes

    G99VR45-
    As low as $154.10
  30. Von Duprin 9927 Bottom Vertical Rod 110574

    The Von Duprin 9927 Bottom Vertical Rod 110574 is the replacement rod for broken or bent vertical rods.  All of the 9927 bottom rods are the same length, this is set by Federal Building Codes, so the center line of the Panic Hardware is a certain height from the finished floor. The length of the rod is 31-1/4" long, less the fittings.  The old part number on this was 110574, and the newer one is 050514.

    Plated Door Finishes

    G99VR50-
    As low as $101.06
  31. Von Duprin 9927 Bottom Latch 050090

    The Von Duprin 9927 Bottom Latch 050090 replaces and updates all 9827 and 9927 bottom latches to the new style, if your device was installed before October 1998. If your device is newer then October 1998, then use the G050401. Mounting screws and bracket are included.

    Von Duprin Part # 050090

    G99VR55
  32. Von Duprin Strike 248L-4

    The Von Duprin 248L-4 Strike is used as a Bottom Surface Mounted Strike on the 2227, 8827, 9927, and 9827 Surface Vertical Rod Panic Devices. The 248L-4 strike measures 9/16" wide by 2-1/2" high with a hole spacing of 1-7/8. The strike projects out 3/8".  Ships with shim and mounting screws.  Burnished steel construction.

    Von Duprin Part # 248L-4

    248L-4
    $62.63
  33. Von Duprin 050538 EL Dogging Rod Retainer

    Von Duprin 050538 EL Dogging Rod Retainer

    Fitting threads into the 050536 HD EL Solenoid and connects to the Dogging Rod

    #5 On Diagram

    G050538
    $17.72
View as Grid List

Items 37-72 of 199

per page
Set Descending Direction