88 Series| Von Duprin Exit Devices

Compare RBA Door’s selection of Von Duprin 88 and 8827 panic bar hardware and replacement parts. The 88 and 8827 series devices work with all single and double doors with mullions and is UL listed for accident hazard installations. For more information here is the Manufactures Catalog.  Also, check out our Von Duprin 88 Rim Device Parts Break Down, Von Duprin 8827 Surface Vertical Rod Parts Break DownVon Duprin 8875 Mortise Device Parts Break Down and Von Duprin 880 Outside Trim visuals to help you identify the parts you need.

Filter
View as Grid List

Items 37-55 of 55

per page
Set Descending Direction
Page
  1. Von Duprin 88 Spring Stop Assembly 050451

    The Von Duprin 88 Spring Stop Assembly 050451 is the piece that holds the hinge case spring in place. It is used on all of the Von Duprin 88 models.

    Von Duprin Part # 050451
    Old Part #107682

    88R220
    $21.61
  2. Von Duprin 88 Axle Package 090006 090082

    Von Duprin Exit Device 88 Axle Package

    Von Duprin 88 Axle Package

    New style axle snaps together, and replaces the old style which were screwed together with allen wrenches. This style of axle has been around since about 1990. The piece on the right is only used for taking the axle apart.

    Von Duprin Part # 090006 or 090082

    88R40
  3. Von Duprin 8827 Special Chassis Nut 050277

    Von Duprin 8827 Special Chassis Nut 050277

    The 8827 Special Chassis Nut goes on the ends of the 8827 Chassis Tie Rod. The Nut is threaded all the way through so the cover mounting screws can then be threaded on it also. The nut is 3/8" long by 1/4" hex.

    Von Duprin Part # 050277
    Old Von Duprin Part # 960652

    88VR190
    $14.92
  4. Von Duprin 880/990 Trim Hex Stud 956760

    Von Duprin 880/990 Trim Hex Stud

    This is the Hex Stud used on the 880 and 990 Trim Plates. The threads are 7/32-24. Overall lenght is 2"

    Von Duprin Part # 956760

    G956760
    $12.27
  5. Von Duprin 88 Spring Tube Bracket 050477

    Von Duprin 88 Spring Tube Bracket

    This bracket holds the hinge case spring tube in place. The screws are included with the bracket.

    Von Duprin Part # 050477
    Old Part # 969369

    88R210
    $16.57
  6. Von Duprin 88 Latch Tail Springs (2) 050393

    Von Duprin 88 Latch Tail Springs

    This is the spring that pushes the latch bolt out. Used on all Von Duprin 88 Rim Devices. The spring measures 2-5/8" long by 3/16" diameter.

    Sold in packages of 2.

    Von Duprin Part #050393

    88R130
    $12.27
  7. Von Duprin 88 Spring Tube

    Von Duprin 88 Spring Tube

    Spring tube measures 2-1/4" long by 3/8" diameter, steel construction.

    Von Duprin Part # 050476
    Old Part #951081

    88R200
    $13.82
  8. Von Duprin 8827 Chassis Tie Rod Pkg 050328

    Von Duprin 8827 Chassis Tie Rod Pkg 050328

    The 8827 Chassis Tie Rod Package is the rod that goes through the top and bottom latches. The Tie Rod is held in place by the Special Chassis Nut. The Tie Rod measures 1-3/8" long by 3/16" diameter.

    Von Duprin Part # 050328
    Old Von Duprin Part # 967616

    88VR195
    $12.43
  9. Von Duprin 050478 8827-F Special Hex Stud Kit

    Von Duprin 8827-F Special Hex Stud Kit

    The Von Duprin Special Hex Stud mounts on the upper and lower latches.  The cover attaches to the Hex Stud, it is like a spacer.

    Von Duprin Part # 050478
    Old Part # 961218

    G050478
    $17.00
  10. Von Duprin 8827 Bottom Rod Connector 050327

    Von Duprin 8827 Bottom Rod Connector.

    Connects bottom rod to the bottom latch. The Bottom Rod Connector is included with the Von Durpin Bottom Rod.

    Von Duprin Part # 050327
    Old Part #960578

    88VR160
    $21.83
  11. Von Duprin 8827 Top Rod Connector 960577

    Von Duprin 8827 Top Rod Connector

    Inserts into rod so the latch can connect to the rod. The top vertical rod does not ship with the top rod connector!

    Von Duprin Part # 050279
    Old Part # 960577

    88VR50
    $22.63
  12. Von Duprin 900850 Latch Cover Screw Package

    The Von Duprin 900850 Latch Cover Screw Package is used on the 22, 33, 35, 98 and 99 Series surface vertical rod latch covers.  The are sold in packages of 2 screws.

    88VR40-
    As low as $17.40
  13. Von Duprin 88 Dog Screw 090083

    Von Duprin 88 Dog Screw. Newer style, after 1975 or so. If you have an older exit device they no longer make that screw.  I would recommend the D100, Panic Bar Retainer, for dogging down your device.

    Von Duprin 88 dog screw 14 threads per inch

    Von Duprin Part # 090083

    88R50
    $9.21
  14. Von Duprin 88 Tube Attaching Ring 090021

    The Von Duprin 88 Tube Attaching Ring 090021 is also used on the Von Duprin 55.  The ring fits over the device lever arm, and is expanded by the Wedge (88R90) and the Wedge Tite Screw (88R100).  When the Wedge Tite Screw is tightened the Ring expands and keeps the crossbar parallel to the door.  Measures 15/16" long by 13/16" diameter.

    Von Duprin Part #090021
    Old Part # 965676

    88R110
    $11.27
  15. Von Duprin 88 Hinge Case Spring 090080

    Von Duprin 88 Hinge Case Spring

    Used on all Von Duprin 88, 8847, 8827 and 8827 Exit Devices. 4-1/2" long x 5/16" diameter.

    Von Duprin Part # 090080

    88R140
    $7.68
  16. Von Duprin 88 Wedge Ring 090020

    The Von Duprin 88 Wedge Ring 090020 is also used on the Von Duprin 55's.  The Wedge Tite Screw applies pressure on the Wedge which expands the Tube Attaching Ring to grip the Cross Bar. Measures 5/8" on the flat edge.

    Von Duprin Part # 090020
    Old Part # 956520

    88R90
    $6.98
  17. Von Duprin 88 and 55 Wedge Tite Screw 090081

    The Von Duprin 88 and 55 Wedge Tite Screw 090081 is used on the 55 and 88 panic hardware.  This screw applies pressure to the wedge which then expands the wedge ring to key the Von Duprin 88 and 55's crossbars tite.  The screw is a 5/16-18 x 5/8 hollow set point.

    Von Duprin Part # 090081

    88R100
    $2.30
  18. Von Duprin Cylinder Cup and Tail Peice

    The Von Duprin 900581 Cylinder Cup and Tail Piece Assembly is used on just about everyone of their devices outside tirm.

    G900581
    $18.48
  19. Von Duprin 050580 Weather Stripping for 5654/5754

    The Von Duprin 050580 Weather Stripping is for there 5654 and 5754 Mullions.  Each strip is 10' long and two would be required per mullion.  This product is specific to Von Duprin products and will usually only work on Von Duprin Products.

    G050580
    $36.82
View as Grid List

Items 37-55 of 55

per page
Set Descending Direction
Page