98/99 Series

RBA Door offers a large selection Von Duprin 98 and 99 series panic door hardware and accessories.The 98 and 99 series are designed and manufactured in accordance to IOS 9001 Quality Management System and meet all accepted U.S. domestic and international exit device standards. Call the experts at RBA Door for more information regarding the Von Duprin 98 and 99 series exit devices. Von Duprin 98/99 Rim Device Parts Break Down, Von Duprin 98/9927 Surface Vertical Rod Parts Break Down, Von Duprin 98/9975 Mortise Device Parts Break Down,   Von Duprin 98/9847-48 Concealed Rod Parts Break Down, and the Von Duprin 990 Trim Hardware Break Down.

View as Grid List

Items 1-36 of 76

per page
Set Descending Direction
Page
  1. Von Duprin 99 Panic Device Only

    The Von Duprin 99 Rim Panic device has been around since the late 1970's and has gone through a couple of improvements.  One of the great things about the 99 is the availability of replacement parts.  Even when the device is upgraded, the upgraded parts will work with the older versions that can be close to 40 years old.  This device is for all types of single and double doors with mullions.  The device is UL Listed for Panic Exit Hardware and is considered Grade 1, the heaviest duty rating possible.  The Von Duprin 98 device has a smooth mechanism case and the Von Duprin 99 device has a grooved case. The rim device is non-handed, meaning it will work on Left and Right hand doors.   Ships with all the mounting screws and the 299 Strike.

     

    Plated Door Finishes

    99EO
    As low as $1,350.51
  2. Von Duprin EL99 Panic Device Only

    This is the same trusted Von Duprin 99 with Electric Latch Retraction, also known as EL.

    The EL feature allows for the remote unlatching of exit devices. A control station operator can flip a switch to retract the latch bolt and immediately change an exit door to push-pull operation. A powerful, continuous duty solenoid retracts the latch bolt, either for momentary unlatching, or for extended periods of time. The EL feature is an alternative to manual dogging.

    EL devices are also useful with automatic door operators, and may be applied to fire-rated applications when under the control of an automatic fire alarm system.

    UL approved for Class II circuit applications.

    The EL option does not include the power transfer from door to frame, the power supply, or the control operator. Refer to EPT-2 power transfer and the PS914 power supply.

    The PS914 with the 9002RS option card is the minimum option card required. Other option cards available for other functions, see PS914 power supply for additional information.

    Ships with all the mounting screws and the 299 Strike.

    Plated Door Finishes

    EL99EO-
    As low as $2,417.19
  3. Von Duprin 9927 Panic Device

    Von Duprin 9827/9927 surface mounted vertical rod device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The Von Duprin 9827 device has a smooth mechanism case and the Von Duprin 9927 device has a grooved case. The surface vertical rod device is non-handed.

    Plated Door Finishes

    9927EO-
    As low as $2,176.60
  4. Von Duprin 9975 Panic Device Only

    Von Duprin 9875/9975 mortise lock device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Fits stock hollow metal doors with 86 cutout and door stiles as narrow as 4-3/4" (121mm). The Von Duprin 9875 device has a smooth mechanism case and the Von Duprin 9975 device has a grooved case. The mortise lock device is non-handed

    Plated Door Finishes

    9975EO
    As low as $2,849.76
  5. Von Duprin Panic Device 99 Lever Trim

    The Von Duprin Panic Device 996L Lever Trim has an escutcheon plate that measures 2-3/4" wide by 10-3/4" high and projects out 27/32". The handle projection is 2-7/8". The key cylinder, not included, locks and unlocks the lever.  This lever handle is handed, but is field reversible. Key lock and unlocks lever.  We ship the 996L-R&V

    Plated Door Finishes

    99L
    As low as $593.10
  6. Von Duprin 990DT Trim

    The Von Duprin 990DT Trim is known as a Dummy Trim.  This plate mounts on the exterior of the door, and the welded on mounting studs line up with the 99 device on the interior of the building.  If you have a different manufacture or a different Von Duprin series on the interior, it will not line up.  On the back of this plate we usually find the number 990 stamped on it.  The plate shown here is for the Rim and Surface Vertical Rod 99 and 98 devices.  If you have a Mortise or Concealed Vertical Rod, call us and we will order that model.  The plate measures 3" wide by 14-3/16" tall.  Order here for the 990DT-R&V.

    Plated Door Finishes

    99DT-
    As low as $307.79
  7. Von Duprin Panic Device 990NL Trim

    The Von Duprin Panic Device 990NL Trim is known as a Night Latch Trim.  This plate mounts on the exterior of the door, and the welded on mounting studs line up with the 99 device on the interior of the building.  The key locks and unlocks the interior exit device.  If you have a different manufacture or a different Von Duprin series on the interior, it will not line up.  On the back of this plate we usually find the number 990 stamped on it.  The plate shown here is for the Rim and Surface Vertical Rod 99 and 98 devices.  If you have a Mortise or Concealed Vertical Rod, call us and we will order that model.  The plate measures 3" wide by 14-3/16" tall.   Order here for the 990NL-R&V.  The key cylinder is sold separately.

    Plated Door Finishes

    99NL
    As low as $358.50
  8. Von Duprin Panic Device 99 Knob Trim

    The Von Duprin 990K Trim is known as a Knob Trim.  This plate mounts on the exterior of the door, and the welded on mounting studs line up with the 99 device on the interior of the building.  If you have a different manufacture or a different Von Duprin series on the interior, it will not line up.  On the back of this plate we usually find the number 990 stamped on it.  The key locks and unlocks the knob.  The plate shown here is for the Rim and Surface Vertical Rod 99 and 98 devices.  If you have a Mortise or Concealed Vertical Rod, call us and we will order that model.  The plate measures 3" wide by 14-3/16" tall.   Order here for the 990K-R&V.

    Plated Door Finishes

    99K-
    As low as $367.56
  9. Von Duprin Panic Device 990TP Trim

    The Von Duprin 990TP Trim is known as a Thump Piece Trim.  The key cylinder locks and unlocks the thumb piece, key cylinder sold separately.  This plate mounts on the exterior of the door, and the welded on mounting studs line up with the 99 device on the interior of the building.  If you have a different manufacture or a different Von Duprin series on the interior, it will not line up.  On the back of this plate we usually find the number 990 stamped on it.  The plate shown here is for the Rim and Surface Vertical Rod 99 and 98 devices.  If you have a Mortise or Concealed Vertical Rod, call us and we will order that model.  The plate measures 3" wide by 14-3/16" tall.   Order here for the 990TP-R&V.

    Plated Door Finishes

    99TP
    As low as $477.36
  10. Von Duprin 050046 98/99 Maintenance Kit

    The Von Duprin 050046 98/99 Maintenance Kit has all the pieces and screws to keep your 98 or 99 device operating for years.  Kit includes 17 pounds of replacement parts for the panic hardware and the outside trim.

    Von Duprin part # 050046

    98/99 Maintenance Kit Instruction Manual

    G050046
    $1,202.88
  11. Von Duprin Dogging Adapter Spring 090042

    The Von Duprin Dogging Adapter Spring 090042 is the clip that holds the dogging shaft in the assembly.  We sell these individually, and it is the #2 item on the diagram.

    G090042
    $10.75
  12. Von Duprin Dogging Adaptor 090043

    The Von Duprin Dogging Adapter 090043 is the piece that the 090042 and 090040 fit through and lock in place.  These piece very rarely has to be replaced.  The Shaft 090040 is usually the part you need to replace.  We sell these individually.

    G090043
    $12.13
  13. Von Duprin 22, 33, And 99 Dogging Shaft 090040

    The Von Duprin 22, 33, And 99 Dogging Shaft 090040 is the peice that the hex dogging key would fit into. The shaft is for a 5/32" dog key, but it has to be the long version.   The shorter versions will not have enough reach to get all the way into the shaft.  This is a very common problem area, the hole that the key fits in is only about 1/4" deep, and if you do not push down on the hex key when locking it open it will round out over time.  To remove the shaft, just pull it straight out with a part of channel locks.   We reinstalling the new one you might have to bend the ends of the adapter spring 090042 back down. This dogging shaft is for use on all Von Duprin Panic Exit Devices shipped after 1997.

    G090040
    $10.75
  14. Von Duprin Dogging Spring 090041

    The Von Duprin Dogging Spring 090041 is the spring that activates the Dogging Hook # 090044.  These do occasionally fail, we sell them individually.  It is # 3 on the diagram.

    G090041
    $12.13
  15. Von Duprin Dogging Hook 090044

    The Von Duprin Dogging Hook 090044 is the piece that grabs the push bar mechanism and keeps it in the dogged position.  The does wear out, but it takes a long time.  This piece is used on the 22, 33A, 35A, 98 and 99 series devices made after 1997.  We sell this part individually and it is #5 on the diagram.

    G090044
    $9.94
  16. Von Duprin 050709 Old Style Dogging Assembly

    The Von Duprin 050709 Dogging Assembly is used to update the Von Duprin 22, 33, 35, 98 and 99 device shipped before 1997.  The dogging key on this assembly is 5/32", and you would want to use the longer version of our 88R60 dog key.

    Von Duprin Part # 050709
    Old Part # 050153

    G050709
    $77.88
  17. Von Duprin 968112 Old Style Dogging Shaft

    The Von Duprin Old Style Dogging Shaft was used on devices manufactured before July 1997.  The Shaft measures roughly 1-1/2" long with a 1/2" diameter.  The hex is 5/32".

    Von Duprin Part # 968112

    G968112
    $18.23
  18. Von Duprin Panic Device 7500 Mortise Body Only

    This Von Duprin Panic Device 7500 Mortise Body Only is used on the Von Durprin 8875, and Von Duprin 98-9975 panic hardware. The body measures 5-7/8" high by 4-1/2" deep and 1" thick. This is the body that has been used since about 1977.

    Call or email for pricing on the SS7500, 7500-IN, and E7500 Mortise Bodies and replacement parts for the Lock.

    We ship the 7500 in US32D, brushed stainless steel.

    G7500
    $661.09
  19. Von Duprin 99 Rim Center Case 050020

    The Von Duprin 99 Rim Center Case 050020 replaces all previous versions of the Von Duprin 98/99 Rim Device Center Cases. One of the best things about a Von Duprin is when they redesign a part, they make it so your old device is not obsolete and you can update your device.  All internal parts, springs, screws and cover mounting bracket included.

    Von Duprin Part # 050020

    G99R15
    $462.26
  20. Von Duprin 3348/9948 Bottom Latch Kit 050495

    The Von Duprin 3348/9948 Bottom Latch Kit 050495 is used on the 33A, 35A, 98 and 99 exit devices.  Replaces previous versions of the 33/3548 and 98/9948 bottom latches.

    Von Duprin Part # 050495
    Von Duprin Old Part # 112907

    G050495
    $426.76
  21. Von Duprin 050494 3348/9948 Top Latch Kit

    The Von Duprin 3348/9948 Top Latch Kit 050494 is used on the 33A, 35A, 98 and 99 exit devices.  Replaces all previous versions of the 33/3548 and 98/9948 top latches.

    Von Duprin Part # 050494
    Von Duprin Old Part # 112906

    G050494
    $428.37
  22. Von Duprin 3347/9947 Top Latch Kit 050492

    Von Duprin Exit Device 47 Top Latch Kit 050492

    This Von Duprin Concealed Top Latch is used on the 33A, 35A, 98 and 99 exit devices. The Latch Kit includes Latch, Mounting Brackets and all screws.

    Von Duprin Part # 050492
    Von Duprin Old Part # 109759

    G050492
    $353.64
  23. Von Duprin 050066 33/3547 98/9947 Compression Spring (10)

    Von Duprin 050066 33/3547 98/9947 Compression Spring (10)


    One of two springs located in the 33/3547 and 98/9947 Top Latch 050492.  Sold in packages of 10.


    Von Duprin Part # 090066

    G090066
    $14.92
  24. Von Duprin 050069 33/3547 99/9947 Ratchet Lever Spring (2)

    Von Duprin 090069 33/3547 99/9947 Ratchet Lever Spring (2)


    One of two springs located in the 33/3547 and 98/9947 Top Latch 050492.  Sold in packages of 2.


    Von Duprin Part # 090069

    G090069
    $15.28
  25. Von Duprin 98/9947 98/9949 Center Case 050022

    Von Duprin 98/9947-F 98/9949-F Center Case

    Replacement Center Case for the 9847/9947 and 9849/9949 Exit Devices

    Von Duprin Part # 050022

    G050022
    $621.34
  26. Von Duprin 050073 98/9947 98/9949 98/9975 Case Cover

    Von Duprin 050073 98/9947 98/9949 98/9975 Case Cover

    Cover for the Von Duprin 050022, 050029 and 050030 Center Chassis Assemblies.  Cover includes mounting bracket and screws.

    Von Duprin Part # 050073

    Plated Door Finishes

    G050073-
    As low as $170.19
  27. Von Duprin 050023 98/9975-F Center Case Kit

    Von Duprin 050023 98/9975-F Center Case Kit

    The Von Duprin 050023 98/9975-F Center Case Kit less cover is used on the 9875 and 9975, Panic and Fire Rated Hardware.

    Von Duprin Part # 050023

    G050023
    $176.43
  28. Von Duprin 050574 98/9947 Adjustable Top Rod

    Von Duprin 050574 98/9947 Adjustable Top Rod

    Von Duprin 98/9947 Adjustable Top Rod for 6'8" to 8'4" doors.  This rod is used on the 9847, 9847-F, 9947 and 9947-F

    Von Dupin Part # 050574
    Old Part #110375

    G050574
    $88.99
  29. Von Duprin 050575 98/9947 Adjustable Bottom Rod

    Von Duprin 050575 98/9947 Adjustable Bottom Rod

    Von Duprin 050575 98/9947 Adjustable Bottom Rod.  This rod is used on the 9847, 9847-F, 9947 and 9947-F

    Von Dupin Part # 050575
    Old Part #112342

    G050575
    $103.79
  30. Von Duprin 900620 35/3348 98/9947 Adjusting Screw Package

    The Von Duprin 900620 35/3348 98/9947 Adjusting Screw Package is used to adjust the concealed vertical rods.  This package is used on the 3347, 3547, 3347-F, 3547-F, 9847, 9847-F, 9947 and 9947-F.   This is a package of 2.

    Von Duprin Part # 900620
    Old Part # 109811

    G900620
    $28.62
  31. Von Duprin 9927 Center Case 050021

    The Von Duprin 9927 Center Case 050021 center case replaces all earlier versions of the 9827 and 9927 Center Cases. Everything shown in the picture is included with the product. Along with all the mounting screws.

    Von Duprin part # 050021

    G99VR40
    $273.39
  32. Von Duprin 99 Push Bar Retrofit Kit-Pbkit

    The Von Duprin 99 Push Bar Retrofit Kit-Pbkit updates your current version touch pad, to the newest version. Used on all the Von Duprin 33A, 35A, 99 and 98's.  For doors 30" to 36" order the 36" size. If your door is 36" to 48" order the 48" size.  The Push Bar is 18" wide on the 36" version.  Please allow 1 week for delivery.

    Von Duprin part # PBKIT

     

    Plated Door Finishes

    G99R35
    As low as $259.47
  33. Von Duprin 3347/9947 Bottom Latch Kit 050493

    Von Duprin Exit Device 47 Bottom Latch Kit 050493

    This Von Duprin Concealed Bottom Latch is used on the 33A, 35A, 98 and 99 exit devices.

    Von Duprin Part # 050493
    Von Duprin Old Part # 106780

    G050493
    $295.76
  34. Von Duprin Pull Handle 972466/972467

    The Von Duprin Pull Handle 972466/972467 replacement Grip/Handle only, screws not included. Cast bronze construction, and then plated to the selected finish. The Grip measures 15/16" wide by 6" long. The center to center hole spacing is 5-1/2". This handle works on the Von Duprin 608, 696, 880, and 990 outside trim plates.

    Von Duprin Part # 972466 and 972467
    Old Part # 969925 and 959122

    Plated Door Finishes

    G972466-
    As low as $145.80
  35. Von Duprin 9927 Bottom Latch 050090

    The Von Duprin 9927 Bottom Latch 050090 replaces and updates all 9827 and 9927 bottom latches to the new style, if your device was installed before October 1998. If your device is newer then October 1998, then use the G050401. Mounting screws and bracket are included.

    Von Duprin Part # 050090

    G99VR55
  36. Von Duprin 9927 Top Latch 050091

    The Von Duprin 9927 Top Latch 050091 used on all the Von Duprin 9827 and 9927's. Replaces and updates all 9827 and 9927 bottom latches to the new style, if your device was installed before October 1998. If your device is newer then October 1998, then use the G050400.  This is usually the problem if your bottom rod is dragging on the floor. Latch measures:   1-1/16" wide x 4-5/16" long (less latch bolt) x 1-7/8" projection at the highest point.  Includes screws.

    Von Duprin Part # 050091

    G99VR10
View as Grid List

Items 1-36 of 76

per page
Set Descending Direction
Page