1990 / 2090
We offer a large selection of Dor-o-matic 1990 and 2090 series assemblies and replacement parts, the bestselling exit devices for aluminum doors. If you are unsure of the products you require, check out the teardowns of the 990 and 1990 series and the 1090 and 2090 series panic devices.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts Breakdown
-
Dor-o-Matic 2090 Backplate Assembly PB89
The Dor-o-Matic 2090 Backplate Assembly PB89 has been around since the early 1970's. It is now called the Falcon 2090 Back Plate Sub Assembly, but it is the same thing, just different owners of the company. This piece includes the plate casting, latch bolt, pinion gear, and retractor.
Doromatic Part # 4270902974 Right Hand
Doromatic Part # 4270902968 Left HandLEFT HAND BACKPLATE SHOWN
G209090 -
Dor-O-Matic 1690/1790/1990/2090 Pinion PB5
The Dor-O-Matic 1690/1790/1990/2090 Pinion PB5 has been in use since the 1970's. This gear or pinion is what activates the latch or the rods on the 990, 1090, 1690, 1790, 1990 and 2090 devices. The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008. They are the same device, with the same parts, just a different name plate. The manufacture part number on this is CAM.102, PB5 or PB140.
G199005 -
Dor-o-Matic 1690/1990 Retractor PB35
The Dor-o-Matic 1690/1990 Retractor PB35 has been used since the 1970's. The manufacture has changed names in the last 5 years and now goes by Falcon Panic Hardware. This piece is used the 990, 1690 and 1990 devices. The pinion rides inside this bracket to raise and lower the internal rods. Parts used with the retractor are the Pinion (G199005), Traveller (G199028) and the Pinion Bushing (G199046). Retractor measures 1-7/8" long by 7/8" wide by 1/4" thick.
Doromatic part # PB35 or RETRACT.101
G199035 -
Dor-O-Matic 1690/1790/1990/2090 Cylinder Bushing BUSH.102
The Dor-O-Matic 1690/1790/1990/2090 Cylinder Bushing BUSH.102 fits around the Pinion gear to take up slack and reduce friction. This piece is now known as the Falcon Panic Hardware BUSH.102, but for many years was called the Dor-o-Matic PB46.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownG199046 -
Dor-o-Matic 1990/2090 Lever Arm DC15 DC40
Dor-o-Matic Lever arm.
Doromatic part # DC15 Lh and DC40 Rh
Order G199015 for Left Hand and G199040 for Right Hand
Left hand lever shown for 1990 and the 2090 inactive case.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199015- -
Dor-o-Matic 2090 Lever Arm DC16 DC41
Doromatic Exit Device 2090 Lever Arm
Right hand dark brown shown in picture
Dor-o-Matic 1090/2090 Repair Parts Breakdown
G209020 -
Dor-o-Matic Panic Device 2090 / 1790 Standard Strike
The Falcon / Dor-o-Matic Panic Device 2090 / 1790 Standard Strike is the strike shipped with all new Falcon 2090 and 1790 exit devices. The strike measures 1-3/4" high, 1-3/4" deep and only comes in a Black Matte color. This strike was known for a long time as the Dor-o-Matic SD36 Strike, but after changing there name to Falcon in about 2008, it is know known as the Falcon SD36 Strike.
G2090STK -
Dor-o-Matic1690/1990 Bottom Rod Guide
Dor-o-matic bottom rod guide. Fits up inside the door to take up slack in bottom rod. Also known as the GPB134 and G1990134
Doromatic part # 4270107176
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts Breakdown
Falcon / Dor-o-Matic 2390 Parts Break DownG199HEX -
Dor-o-Matic 1690/1990 Bottom Rod PB25
Dor-o-Matic 1690/1990 bottom rod. Connects panic bar to the bottom latch
Doromatic Part # 4270101825 PB25 and GPB25
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199024B -
Dor-o-Matic 1690/1990 Top Rod-PB24
Dor-o-Matic 1690/1990 Top rod. Connects panic bar to the bottom latch
Doromatic Part # 4270100017 PB24
Select the height of your door for the correct rod.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199024T- -
Dor-o-Matic 1690/1990 Top Strike PB48
The Dor-o-Matic 1690/1990 Top Strike PB48 is used on the Dor-o-Matic 1690, 1990 and 2390 Concealed Vertical Rod Exit and Panic Devices. The plate measures 1" x 1-1/16" with 4 holes. The mounting holes are 11/16" x 11/16" on center. The diameter of the pin is 7/16" and projects out 5/32". Ships with mounting screws and 3 shim plates. The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008. They are basically the same device, with the same parts, just a different name plate. Falcon part # PB48.
Dor-o-Matic/Falcon 990/1990 Repair Parts Breakdown
Dor-o-Matic/Falcon 1690 Repair Parts BreakdownG199034 -
Dor-o-Matic 1690/1990 Top Strike Shim Package-SHIM.112
Doromatic PB48 Strike Shim Package Of 10 Pieces
This Dor-o-Matic product is for the PB48 Top Strike. This is the shim that goes under the top strike. The plate measures 1" x 1-1/16" with 4 holes. The mounting holes are 11/16" x 11/16" on center. They are only sold in packages of 10.
Doromatic Part # SHIM.112
G199034-SHIM -
Dor-o-Matic 2090 Latch Link PB62
Dor-o-matic 2090 latch link
Dor-o-Matic 1090/2090 Repair Parts Breakdown
G209040 -
Dor-o-Matic 2090 Retractor Retaining Ring PB81
Doromatic Exit Device 2090 Retractor Retaining Ring
Keeps the Retractor in place.
Doromatic part # RRING.102
Dor-o-Matic 1090/2090 Repair Parts Breakdown
G209030 -
Dor-o-Matic 1990/2090 Dog Screw PB14
Dor-o-Matic 990/1090/199092090 dogging screw. This is the screw that holds down the cross bar when you tighten it.
The thread is 7/16-14.Doromatic part # SCREW.1022
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199014 -
1990/2090 Dor-o-Matic Stud Housing Mounting PB2
Doromatic Mounting Stud. Male stud mounts to the door and the housing slides over.
Doromatic part # PB2 and also STUD.101
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199002 -
Dor-o-Matic 1990/2090 Spring Retainer SD45
Dor-o-Matic spring retainer. The retainer fits under the housing, by the dog screw and holds one end of the spring. The spring pin holds the other side.
Doromatic part # RETAIN.102
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199045 -
Dor-o-Matic 1990/2090 Crossbar Screw 1/4- 20 X 1" PB12
Dor-o-Matic 990/1090/1990/2090 Cross Bar Screw
Doromatic part # SCREW.1027
1/4-20 x 1" Self Tapping Threads
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199012 -
Dor-o-Matic 1690/1990 Rod Bearing PB3
Dor-o-Matic Rod Bearing. This is the piece that goes over the rod and fits into the traveller to take up slack.
Doromatic part # BUSH.109 or PB3
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199003 -
Dor-o-Matic 1990/2090 Pin Spring RD10
Dor-o-Matic 990/1990/2090 Lever Arm Pin. This pin is what the spring attaches to.
Doromatic part # PIN.104
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199011 -
Dor-o-Matic 1690/1990 Jam Nut PB23
Dor-o-Matic latch rod jamb nut. This nut prevents the latch from coming the rod. Also known as PB23, or GPB23.
Doromatic part # NUT.101
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199023 -
Dor-o-Matic 1990/2090 Allen Wrench PB30
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199010 -
Dor-o-Matic 1990/2090 "E" Ring PB4
Dor-o-matic 1990/2090 Pivot Pin E Ring. This ring is used on the Pivot Pin G199013.
7/16" diameter
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199044 -
Dor-o-Matic 1990/2090 "E" Ring RRing.109
The Dor-o-Matic 1990/2090 "E" Ring RRing.109 is use to connect the concealed rods to the Traveller Assembly (G199028, PB88, or 4270100013). The rods fit through the traveller and rod bushings, and the Retaining Ring holds them in place. This piece has a diameter of 1/2". This item is now under the Falcon name plate.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199004 -
Dor-o-Matic 1990 and 2090 Set Screw PB38
The Dor-o-Matic 1990 and 2090 Set Screw PB38. This set screw goes in the housing to secure it on the mounting studs. There is 3 of these screws on each housing, two on the left and right side toward the top, and one on the bottom. The manufacture is now Falcon.
Doromatic part # SCREW.1039 PB38
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199038 -
Dor-o-Matic 2090 Latch Spring PB61
Doromatic 2090 Latchbolt spring. Pushes out the latch bolt.
Doromatic part # SPRING.104
Dor-o-Matic 1090/2090 Repair Parts Breakdown
G209060 -
Dor-o-Matic 1990/2090 Arm Bearing SD43
Dor-o-Matic 1990 and 2090 arm bushing. This bushing goes between the pivot pin (arm axle) and housing.
Doromatic part # BUSH.103 or PB43
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts BreakdownG199043