Search results for: 'AUTOMATIC DOOR'
-
Anodized Aluminum Door Kick Plate : 8" x 32"
The Anodized Aluminum Door Kick Plate : 8" x 32" are the most cost effective, least expensive. The aluminum plates are 16 gauge, or .050" thick. They have an anodized finish to resist corrosion and we find these in many commercial buildings through out the United States.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.07 per square inch.
GKP832 -
Anodized Aluminum Door Kick Plate : 6" x 30"
The Anodized Aluminum Door Kick Plate : 6" x 30" are the most cost effective, least expensive. The aluminum plates are 16 gauge, or .050" thick. They have an anodized finish to resist corrosion and we find these in many commercial buildings through out the United States.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.07 per square inch.
GKP630 -
Satin Nickel Door Kick Plate : 8" x 34" Satin Nickel
Satin Nickel Door Kick Plate : 8" x 34" Satin Nickel
The Satin Nickel is a popular finish we have been seeing the last 15 years. The Satin Nickel Door Kick Plates are a solid brass plate that is Nickel Plated and then brushed to give it the Satin or Brushed look. These plates are 16 gauge or .050″ thick.
Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″. You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses. Custom sizes available starting around $0.28 per square inch depending quantity . Please allow 1 week shipping time.
GKP834sn -
Satin Nickel Door Kick Plate : 6" x 34" Satin Nickel
Satin Nickel Door Kick Plate : 6" x 34" Satin Nickel
The Satin Nickel is a popular finish we have been seeing the last 15 years. The Satin Nickel Door Kick Plates are a solid brass plate that is Nickel Plated and then brushed to give it the Satin or Brushed look. These plates are 16 gauge or .050″ thick.
Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″. You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses. Custom sizes available starting around $0.28 per square inch depending quantity . Please allow 1 week shipping time.
GKP634sn -
Satin Nickel Door Kick Plate : 8" x 32" Satin Nickel
Satin Nickel Door Kick Plate : 8" x 32" Satin Nickel
The Satin Nickel is a popular finish we have been seeing the last 15 years. The Satin Nickel Door Kick Plates are a solid brass plate that is Nickel Plated and then brushed to give it the Satin or Brushed look. These plates are 16 gauge or .050″ thick.
Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″. You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses. Custom sizes available starting around $0.28 per square inch depending quantity . Please allow 1 week shipping time.
GKP832sn -
Duranodic Aluminum (Dark Brown) Door Kick Plate-6 x 28 inches
The Duranodic Aluminum (Dark Brown) Door Kick Plate-6 x 28 inches are 18 gauge (.040”) thick. The finish is a brushed (flat) storefront dark brown color, which is also known as 313AN. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP628DB -
Duranodic Aluminum (Dark Brown) Door Kick Plate-6 x 30 inches
The Duranodic Aluminum (Dark Brown) Door Kick Plate-6 x 30 inches are 18 gauge (.040”) thick. The finish is a brushed (flat) storefront dark brown color, which is also known as 313AN. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP630DB -
Duranodic Aluminum (Dark Brown) Door Kick Plate-8 x 28 inches
The Duranodic Aluminum (Dark Brown) Door Kick Plate-8 x 28 inches are 18 gauge (.040”) thick. The finish is a brushed (flat) storefront dark brown color, which is also known as 313AN. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP828DB -
Duranodic Aluminum (Dark Brown) Door Kick Plate-8 x 32 inches
The Duranodic Aluminum (Dark Brown) Door Kick Plate-8 x 32 inches are 18 gauge (.040”) thick. The finish is a brushed (flat) storefront dark brown color, which is also known as 313AN. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP832DB -
Brushed Stainless Steel Door Kick Plate 16 Gauge .050 : 8" x 30"
The Brushed Stainless Steel Door Kick Plate 8 x 30” 16 Gauge .050 is the most popular. Stainless steel offers one of the best material for commercial applications. They are very hard, and do not dent easily. The also offer the best corrosion resistances out there.
Stainless Steel Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.14 per square inch depending quantity
Please allow 1 week shipping timeGKP830ss16 -
Door Push Plate 59
The Door Push Plate 59 has the classic half round design. The plate measure 7-1/2" wide and 15" tall, and is constructed of 16 gauge metal, which is .050" thick. This plate is similar to the GPH60 (Push Plate 59), but is a 1/2" more narrow and 1" shorter. This plate ships with the matching finish screws.
GPH59- -
Polished Brass Door Kick Plate : 6" x 32"
Polished Brass Door Kick Plate : 6" x 32"
The standard Polished Brass is a solid brass kick plate that is polished and then clear coated to prevent oxidation. These plates are 16 gauge or .050" thick. A draw back of the Polished Brass Plates is oxidation. If the plate becomes scratched or dented, there is a good probability that the clear coat delaminates and moisture could get under the surface. When this happens, the plate will tarnish. The brass base material is softer, so the chances of them becoming scratched or dented in commercial applications is pretty high. You might want to consider Lifetime Brass, which are the same cost per square inch.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut brass screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Custom sizes are available, they run about $0.23 per square inch.
Please allow 1 week shipping time
GKP632B -
Polished Brass Door Kick Plate : 8" x 30"
Polished Brass Door Kick Plate : 8" x 30"
The standard Polished Brass is a solid brass kick plate that is polished and then clear coated to prevent oxidation. These plates are 16 gauge or .050" thick. A draw back of the Polished Brass Plates is oxidation. If the plate becomes scratched or dented, there is a good probability that the clear coat delaminates and moisture could get under the surface. When this happens, the plate will tarnish. The brass base material is softer, so the chances of them becoming scratched or dented in commercial applications is pretty high. You might want to consider Lifetime Brass, which are the same cost per square inch.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut brass screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Custom sizes are available, they run about $0.23 per square inch.
Please allow 1 week shipping time
GKP830B -
Brushed Stainless Steel Door Kick Plate 16 Gauge .050-10 x 30 inches
The Brushed Stainless Steel Door Kick Plate 10 x 30” 16 Gauge .050 is the most popular. Stainless steel offers one of the best material for commercial applications. They are very hard, and do not dent easily. The also offer the best corrosion resistances out there.
Stainless Steel Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.14 per square inch depending quantity
Please allow 1 week shipping timeGKP1030ss16 -
Brushed Stainless Steel Door Kick Plate 16 Gauge .050-10 x 32 inches
The Brushed Stainless Steel Door Kick Plate 10 x 32” 16 Gauge .050 is the most popular. Stainless steel offers one of the best material for commercial applications. They are very hard, and do not dent easily. The also offer the best corrosion resistances out there.
Stainless Steel Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.14 per square inch depending quantity
Please allow 1 week shipping timeGKP1032ss16 -
Brushed Stainless Steel Door Kick Plate 16 Gauge .050-34 x 34 inches
The Brushed Stainless Steel Door Kick Plate 34 x 34” 16 Gauge .050 is the most popular. Stainless steel offers one of the best material for commercial applications. They are very hard, and do not dent easily. The also offer the best corrosion resistances out there.
Stainless Steel Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.14 per square inch depending quantity
Please allow 1 week shipping timeGKP3434ss16 -
Brushed Stainless Steel Door Kick Plate 16 Gauge .050-12 x 34 inches
The Brushed Stainless Steel Door Kick Plate 12 x 34” 16 Gauge .050 is the most popular. Stainless steel offers one of the best material for commercial applications. They are very hard, and do not dent easily. The also offer the best corrosion resistances out there.
Stainless Steel Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.14 per square inch depending quantity
Please allow 1 week shipping timeGKP1234ss16 -
Door Push Plate 60
The Door Push Plate 60 has the classic half round design. The plate measure 8" wide and 16" tall, and is constructed of 16 gauge metal, which is .050" thick. This plate is similar to the GPH59 (Push Plate 59), but is a 1/2" wider and 1" taller. This plate ships with the matching finish screws.
GPH60- -
Polished Stainless Steel Door Kick Plate : 6" x 28"
Our Polished Stainless Steel Door Kick Plate : 6" x 28" are made of solid 16 gauge (0.050” thick) stainless steel. The plates are then polished to a mirror finish on one side. They are then beveled on all 4 edges.
We often have people looking for Brushed Chrome or Polished Chrome, but the appearance of the two finishes next to each other is very difficult to tell which is which. Also a brushed chrome or polished chrome kick plate would be a brass plate which is then chrome plated and brushed or polished depending on the plate. Brass is a soft metal that dents easily, and also does not offer the corrosion resistance that stainless steel does. Since stainless steel is stable in any environment, they do not have to clear coat the plate.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Two way tape is not recommended for the larger plates, because they are just too heavy. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut stainless steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.20 per square inch.
GKP628pss -
Door Push Plate 89
The Door Push Plate 89 is drop forged plate that is .125" thick, and is made of Aluminum, Stainless Steel, Bronze or Brass, depending on the finish. The plate measures 3-1/2" wide by 15-3/4" long with a 1" projection. This plate is considered a combination push pull plate. Package ships with matching mounting screws.
GPH89- -
Lifetime Polished Brass Door Kick Plate-Lifetime Brass-6 x 30 inches
The Lifetime Polished Brass Door Kick Plate 6 x 30 inches has a 16 gauge (.050" thick) base metal, that is then plated with a artificial brass finish that is then polished. The process is called Poly Vapor Deposition or PVD, which is why we hear the name Lifetime Polished Brass Kick Plate PVD. Because the finish is an artificial brass, it does not have to be clear coated, so it will never tarnish. The Lifetime Polished Brass finish cost the same as the Solid Brass Polished Kick Plates. Custom sizes are available starting around $0.23 per square inch depending quantity. Kick Plate comes with screws for mounting. Please allow 1 week shipping time.
GKP630PVD -
Lifetime Polished Brass Door Kick Plate-Lifetime Brass-6 x 34 inches
The Lifetime Polished Brass Door Kick Plate 6 x 34 inches has a 16 gauge (.050" thick) base metal, that is then plated with a artificial brass finish that is then polished. The process is called Poly Vapor Deposition or PVD, which is why we hear the name Lifetime Polished Brass Kick Plate PVD. Because the finish is an artificial brass, it does not have to be clear coated, so it will never tarnish. The Lifetime Polished Brass finish cost the same as the Solid Brass Polished Kick Plates. Custom sizes are available starting around $0.23 per square inch depending quantity. Kick Plate comes with screws for mounting. Please allow 1 week shipping time.
GKP634PVD -
Lifetime Polished Brass Door Kick Plate-Lifetime Brass-8 x 32 inches
The Lifetime Polished Brass Door Kick Plate 8 x 32 inches has a 16 gauge (.050" thick) base metal, that is then plated with a artificial brass finish that is then polished. The process is called Poly Vapor Deposition or PVD, which is why we hear the name Lifetime Polished Brass Kick Plate PVD. Because the finish is an artificial brass, it does not have to be clear coated, so it will never tarnish. The Lifetime Polished Brass finish cost the same as the Solid Brass Polished Kick Plates. Custom sizes are available starting around $0.23 per square inch depending quantity. Kick Plate comes with screws for mounting. Please allow 1 week shipping time.
GKP832PVD -
Door Push Plate 58
The Door Push Plate 58 is the only plate we have that is a forged plate. The forging process involves heat and pressure or pounding. The result is a very heavy and durable metal. This plate measures 3-1/2" wide by 15" tall, with a thickness of 7/32". This is one of the thickest plate we offer, and is the most sturdy.
GPH58- -
Door Pull Plate 5810 | Heavy Duty Pull Plate
The Door Pull Plate 5810 is 7/32" thick forged plate made of solid aluminum, brass or stainless steel depending on the finish. The Door Pull GHE10, handles come with thru bolts and finish washers. The plate has counter sunk holes and sheet metal screws for mounting.
GPL5810- -
Brushed Brass Door Kick Plate-6 x 28 inches
Brushed Brass Kick Plate US4 -16 Ga (.050")
Solid brass plate with brushed finish, then clear coated
Custom sizes available starting around $0.25 per square inch depending quantityKick Plate comes with screws for mounting
Please allow 1 week shipping time
GKP628-US4 -
Brushed Brass Door Kick Plate-6 x 34 inches
Brushed Brass Kick Plate US4 -16 Ga (.050")
Solid brass plate with brushed finish, then clear coated
Custom sizes available starting around $0.25 per square inch depending quantityKick Plate comes with screws for mounting
Please allow 1 week shipping time
GKP634-US4 -
Door Pull Plate 5010
The Door Pull Plate 5010 is .050" wought solid aluminum, stainless steel, or brass depending on the finish. The Door Pull GHE10, handles come with thru bolts. The plate has counter sunk holes and sheet metal screws in matching finish.
3" x 12" GPL312
3.5" x 15" GPL315
4" x 16" GPL416GPL10 -
Brushed Bronze Door Kick Plate-6 x 34 inches
Brushed Bronze Kick Plate US10 (Bronze), also know as 612
Solid bronze plate with in a brushed finish, and is then clear coated.
16 Ga (.050") ThickThis finish was really popular in the 1940 thru the early 1970's. It is an orangish hue brass color.
Custom sizes available starting around $0.27 per square inch depending quantity
Kick Plates come pre drilled with screws.
Please allow 2 week shipping time
GKP634b-US10 -
Brushed Bronze Door Kick Plate-8 x 34 inches
Brushed Bronze Kick Plate US10 (Bronze), also know as 612
Solid bronze plate with in a brushed finish, and is then clear coated.
16 Ga (.050") ThickThis finish was really popular in the 1940 thru the early 1970's. It is an orangish hue brass color.
Custom sizes available starting around $0.27 per square inch depending quantity
Kick Plates come pre drilled with screws.
Please allow 2 week shipping time
GKP834b-US10