Door Hardware

RBA Door has been supplying commercial businesses across the nation with door hardware parts and accessories since 1970. With our help, our customers keep their doors and high traffic entryways in top condition through our variety of door parts and accessories. At RBA Door, we can provide you with our selection of door hardware parts, and any accompanying accessories you may need as well. Having these commercial hardware parts allows our customers to rely on us knowing they have a reliable door hardware parts supplier to count on. Give us a call today to speak to one of our sales experts.

View as Grid List

Items 1-36 of 129

per page
Set Descending Direction
Page
  1. Lock Guard Narrow Line

    • Narrow design unit for use on rose or escutcheon 3-1/2" or less.
    • For use with Type 86 Mortise and Type 161 Cylinder Locks
    (ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000).
    • No exposed fasteners on face of unit.
    • Unique design provides maximum security, virtually eliminating the opening
    between door and frame at the latch point.
    • Available in 13 Gauge Stainless Steel or 12 Gauge Steel

    1-1/2" Wide x 9-1/2" High
    Stud center to center: 8-1/2”

    1625NL-
    As low as $37.54
  2. Lock Guard Standard Line

    • Ideally suited for use with rose or escutcheon 2-3/4" wide or less.
    • For use with Type 86 Mortise and Type 161 Cylindrical Locks
    (ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000).
    • No exposed fasteners on face of unit.
    • Unique design provides maximum security, virtually eliminating the
    opening between door and frame at the latch point.
    • Available in 13 Gauge Stainless Steel or 12 Gauge Steel.

    2-1/2" Wide x 9-1/2" High
    Stud center to center: 8-1/2"

    1625-
    As low as $37.54
  3. Lock Guard Slim Line

    • Designed for use on all Type 161 Cylindrical Locks (ANSI 156.2 Series 2000)
    Monolock and Unilock.
    • No exposed fasteners on face of unit.
    • Unique design provides maximum security, virtually eliminating the
    opening between door and frame at latch point.
    • Available in 13 Gauge Stainless Steel or 12 Gauge Steel.

    1-1/2" Wide x 7" High
    Stud center to center: 4-1/2"

    1625SL-
    As low as $32.54
  4. Ives LG1 Lock Guard

    The Lock Guard with Security Pin is ideal to cover the latchbolt area of the door, lock and frame, with the added protection of a security pin to prevent separation of the door and door frame.  The plate is through bolted with carriage bolts and nuts, which are included with the guard.  The plate is constructed of 13 gauge stainless steel.  The plate measures 3" wide and 11-1/2" high, with a center to center on the mounting bolts of 10-1/2".

    Ives Part Number LG1-US32D

    LG1-
    As low as $59.16
  5. Bilco Barracuda DSO for Out Swinging Doors

    The Barracuda Model DSO is for Out Swinging 36" Doors and provides up to 550 pounds of security.   It is constructed of heavy duty steel with a durable powder coated finish.  The bar goes across the door frame and grabs the lever or knob set with an adjustable clamp.  To secure the door, simply turn the handle until it is secured.  They currently offer two models, one for jambs up to 5-3/4" and one for jambs greater than 5-3/4".  This device ships with all of the hardware and a wall mounting rack for storage.   

    Barracuda Part # DSO-1 and DSO-2

    DSO
    $204.55
  6. Bilco Barracuda DSI for In Swinging Doors

    The Barracuda DSI is designed for In Swinging 36" Doors.  The user places the deive on the floor and slides the metal plates under the door.   Then pushing outward on the handles engages the plates to the exterior door jamb.   Then you simply install the locking pin to barracade the door.   The device is manufactured of heavy-duty steel that is then coated in a durable powder coat paint.   It will work on just about any door and comes in 6 different versions depending on your jamb width.   It is lightweight and comes with a storage mounting rack, along with all the the needed hardware for installation.

    Barracuda Part Number
    4-3/4"  DSI-2
    5-3/4"  DSI-1
    6-3/4"  DSI-3
    7-3/4"  DSI-4
    8-1/4"  DSI-5
    8-3/4"  DIS-6

    DSI
    $204.55
  7. Bilco Barracuda DSO-PB for Out Swinging Doors with Panic Devices

    The Barracuda DSO-PB is for use on Out Swinging 36" Doors with Exit Devices.  It is constructed of heavy duty steel with a durable powder coated finish.  The bar goes across the door frame and grabs the mounting cleat with an adjustable clamp.  To secure the door, simply turn the handle until it is secured.  They currently offer two models, one for jambs up to 5-3/4" and one for jambs greater than 5-3/4".  This device ships with all of the hardware and a wall mounting rack for storage. 

    DSO-PB
    $226.47
  8. Full Mortise Double Swinging Spring Hinge

    Full Mortise Double Swinging Spring Hinge

    Used mainly for commercial kitchen doors,  or any commercial double swinging door.   Sold in sets of 2 hinges, they will handle doors up to 75 lbs that are 1-3/4" thick.   If you door weighs between 75 and 107 lbs, you should use 3 hinges.  The door flange is designed for a standard 4-1/2" x 4-1/2" template mortise.   Hinges ship with wood and metal mounting screws. They come in a standard Painted Primed Finish Gray.

    The jamb flange is .100" thick, the door flange is .134" thick and the barrel diameter is 1.18".

    GDA8145
    $155.93
  9. Decorative Pull Plate A07-P5401

    Decorative Pull Plate A07-P5401

    Quaker Push & Pull Collection
    Featuring 2-3/4" x 10" Plates
    • All BRASS Accents finishes are hand-rubbed and assembled in USA.
    • Sold as complete set including matching mounting screws.
    • Top surface 2" x 9-3/8".

    GA07-P5401
    As low as $74.81
  10. Decorative Push Plate A07-P5400

    Quaker Push & Pull Collection
    Featuring 2-3/4" x 10" Plates
    • All BRASS Accents finishes are hand-rubbed and assembled in USA.
    • Sold as complete set including matching mounting screws.
    • Top surface 2" x 9-3/8".

    GA07-P5400
    As low as $49.68
  11. Door Pull Handle 10

    The Door Pull Handle 10 has 5-1/2" center to center screw spacing. The base is 3/4" diameter, the overall lenght is 6-1/4". The projection is 2" and the clearance is 1-1/2". Also known as a Door Handle or Door Grip. This handle ships with thru bolts and finish washers.

    Plated Door Finishes

    GHE10-
    As low as $21.92
  12. Door Pull Handle 11

    The Door Pull Handle 11  has 8" center to center screw spacing. The base is 3/4" diameter, the overall lenght is 9-1/4". The projection is 2-1/8" and the clearance is 1-1/2". Also known as a 8" Center Door Grip or Door Handle. This handle is shipped with thru bolts and finish washers.

    Plated Door Finishes

    GHE11-
    As low as $35.07
  13. Door Pull Handle 12

    The Door Pull Handle 12 has a 5-1/2" centers hole spacing and is 6" overall. It has 2" projection with 1-3/8" clearance and the base is 5/8" x 1-1/4". Also known as a Door Handle or Door Grip. Shipped with thru bolts and finish washers.

    Plated Door Finishes

    GHE12-
    As low as $48.51
  14. Door Pull Offset 1" Diameter 39

    The Door Pull Offset #39 Handle is constructed of either solid aluminum, brass or stainless steel.  The handle is 1" diameter tubing with a 2-3/4" offset and 2-3/4" projection.  This is the most common type of handle you use today.  Just about every aluminum framed storefront door has a version of this handle.  This handle is available in 8", 10", 12" and 18" centers on the mounting holes.  If you have a 9" centered handle use the PH-4000.   It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Offset Door Handle or Door Grip, and Storefront door handle.1" diameter material

    Plated Door Finishes

    GHE39
    As low as $56.46
  15. Door Sweep 1" Long Rubber

    The Door Sweep 1" Long Rubber has an over height of 1-7/8", with 1" of it being the gray rubber seal.  The mounting rail is constructed of extruded aluminum and is available in aluminum or dark brown finishes.  This sweep ships with screws.

    International Part # IDC-97V

    IDC97V-
    As low as $21.04
  16. Push Bar With Offset Grip M422XM39

    The Push Bar With Offset Grip M422XM39 is usually found aluminum framed glass store front doors.  It is constructed of 1-1/4" diameter solid aluminum, brass, bronze or stainless steel, depending on the finish.  The handle or grip will have either a 8", 10", 12" or 18" center to center screw spacing.  The push bar center to center length is determined by you, we can do any reasonable size.  Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door.  All the fasteners are included, and are determined by the material your door is made of (wood or metal).   Please allow 3-4 weeks on the Dark Bronze and Aluminum, and 2 weeks on the other finishes.

    Finishes

    Plated Door Finishes

    M422xM39
    $333.12
  17. Door Push Plate 50

    The Door Push Plate 50 is the most common push plate we find out in industry today.  It does not matter what type of commercial building you go into, you will find this style and thickness plate.  The are offered in standard sizes, that are shown below, and can be made to custom sizes.  The plates are 16 gauge metal (.050 thick) and are shipped with 4 beveled edges.   The matching finiish screws are shipped with each plate.

    Finishes

    3 x 12" GPH312
    3.5 x 15" GPH315
    4 x 16" GPH416
    6 x 16" GPH616
    4 x 20" GPH420
    8 x 16" GPH816

    Plated Door Finishes

    GPH50
    As low as $10.96
  18. Sargent 607-2 ET Locking Slide Kit for 706 Controls

    Sargent ET Locking Slide Kit for 706 Controls

    Kit includes everything shown in picture.  Separate components are not sold separately.

    Sargent Part # 607-2

    G6072
    $136.50
  19. BB82 Half Mortise 4-1/2" Door Hinge-box of 3

    The BB82 half Mortise 4-1/2” Door Hinge is a specialty hinge. The hinge fastens to the standard mortise slot on the door and the other leaf mounts on the face of the door frame. These are five knuckle, two bearing with square edges. They are constructed of 10 gauge (.134”) steel that is then plated to the desired finish. We ship in boxes of 3 hinges with the wood and machine screw.

    G60045-
    As low as $67.91
  20. BB83 Full Surface 4-1/2" Door Hinge-3 per box

    The BB83 Full Surface 4-1/2” Door Hinge is a specialty hinge.  The hinge fastens to the face of the door and the face or the door frame.  These are five knuckle, two bearing with square edges.  They are constructed of 10 gauge (.134”) steel that is then plated to the desired finish.  We ship in boxes of 3 hinges with the wood and machine screw.

    G80045-
    As low as $61.91
  21. BB84 Half Surface 4-1/2" Door Hinge-Box of 3

    The BB84 Half Surface 4-1/2” Door Hinge is a specialty hinge.  The hinge leaf will mount on the door frame in the standard mortise position and the other leaf mounts on the door face.  These are five knuckle, two bearing with square edges.  They are constructed of 10 gauge (.134”) steel that is then plated to the desired finish.  We ship in boxes of 3 hinges with the wood and machine screw.

    G70045-
    As low as $75.58
  22. Continuous Full Mortise Hinge

    The Ives 112HD Continuous Full Mortise Hinge Geared Hinge measures 83" long and is constructed of extruded aluminum.  This hinge is non handed, and will work on doors up to 48" wide and 450 pounds.  You can easily cut this hinge in the field if your door is less than 83" high.

    GFM100-
    As low as $312.23
  23. Door Sweep 1" Long Brush

    The Door Sweep 1" Long Brush is 1-5/8" overall height including the 1" brush.  Constructed of extruded aluminum, with a nylon brush.  Holes are slotted for adjustment, and #6 x 3/4" stainless steel sheet metal screws are included.

    B633
    As low as $29.95
  24. Securitron EPT

    The Securitron EPT Electric Pwer Transfer provides concealed, secure power and data conduit between a frame and the door.   Transmitting power to electrified locks and exit devices and more.  The EPT comes in two lengths, 10 inch cord and 18 inch cord.

    EPT-
    As low as $75.88
  25. Security Latch Mounting Brackets

    Need extra brackets for your Secuity Latches, you can order them here.  The are sold individually.  Constructed of welded steel and this then powder coated black.

     

    LBRACKET
    $16.50
  26. Glass Patch-18 inch by 120 inch

    This Glass Patch is sold in rolls of 18 inches by 120 inches.  It is a polyester film with an adhesive back with "Warning" on it to prevent accidental injury. This is a temporary transparent patch until the Glass can be replaced.

    CRL7100
    $53.50
  27. ALREX Door Closer Hinge

    The ALREX hinge is a full function hydraulic door closer hinge. It contains all the features of a door closer, closing and latching speed control, power adjustment, and optional hold open feature. They are available in 4, 4.5 and 5 inch (leaf height), and are currently available in Stainless and Black finishes.

    Package includes 2 hydraulic closer hinges and one dummy, for a standard 3 x 7 foot door, 100 pound door.

    Door Handing:
    Door Handing for the ALREX Hinge

    AX21
    As low as $258.75
  28. Gravity Pivot

    Bommer type Gravity Pivot, similar to the obsolete Bommer 7512. Includes top pivot and mounting screws. Available in 603 zinc plated or painted dark bronze or black.

     

    B7512-
    As low as $40.00
  29. Full Mortise Two Bearing Shim Hinge

    The PBB Shim Hinge is for use in Fire Doors where the doors are not square.  Putting cardboard or wood shims on fire doors is prohibited, so they have come up with a solution where one of the leaves are drilled tapped and a set screw is inserted.  These hinges are only available in 4.5 x 4.5 sizes in brushed chrome finish. They are sold in boxes of three hinges and come with wood and machine screws. The base metal is steel.

    SHBB81
    $70.00
  30. Ives Surface Bolt 8" SB453

    The Ives Surface Bolt 8" SB453 has a 1-3/16" throw.  The bar has a cross section measurement of 3/4" wide by 1/4" thick.  It features a strong tension springs to prevent the bolt from creeping.  The bolt is shipped with all of the fasteners and a universal top and a standard mortise strike.  It is constructed of heavy duty steel that is then cadmium plated.

    Ives part # SB453-8-TB-2C

    GSB82C
    $45.19
  31. Continuous Full Surface Geared Hinge

    The Ives 157XY Continuous Full Surface Geared Hinge is an ideal solution for the replacement or worn or broken storefront door pivots, which we run across quite often. I our opinion this is the best solution if you can not find a compatable replacement pivot. The geared hinge will not allow the door to twist, which makes your door more sturdy in the frame. This hinge measures 83" long and is 3-7/16" wide included the cover which hides the screw mounting. A patented easy to install, heavy duty hinge which offers lateral and vertical adjustablility whle the door is still hanging. The hinge is non handed, will mount on a narrow frame, can be cut down in the field and will work on doors up to 550 pounds. 12-24 x 1/2" steel self drilling and tapping screws are included.
    GFS102-
    As low as $284.59
  32. TH1100-HK1 Deluxe Hinge Kit

    The TH1100-HK1 is the perfect solution for existing hinges that have failed, and is a quick and easy fix for compromised door openings.  Deluxe Hinge Kit TH1100-HK1 comes in a package of two hinges, 2 1/4" shims, and 12 one-way mounting screws.   The hinges are non handed, will work on Flush, and 1/8" offset door applications, have a self lubricating pin that rotates on anti-friction bearings, and have a vertical adjustment screw.   They are constructed of an aluminum alloy.

    TH1100HK1-
    As low as $96.43
  33. Door Sweep 1-9/16" Long Brush

    The Door Sweep 1-9/16" Long Brush is one of the longest brush sweeps we offer.  The brush is 1-9/16" long, with the mounting strip being 1-3/16".  The mounting strip is constructed of extruded aluminum, and the holes are slotted for adjustment.  The mounting screws, which are #6 x 3/4" stainless steel sheet metal screws are included.  This product is easily cut down in the field.

    E609A
    As low as $48.23
View as Grid List

Items 1-36 of 129

per page
Set Descending Direction
Page