Manufacturers

View as Grid List

Items 1-36 of 427

per page
Set Descending Direction
Page
  1. Von Duprin 6000 Series Solenoid Kit

    The Von Duprin 6000 Series Solenoid Kit is used to replace burnt out solenoids on there 6000 series.  To order determine the voltage and whether you have fail safe or fail secure.

    Part # 050237 12 VDC (Fail Safe & Fail Secure)
    Part # 050239 16 VDC (Fail Safe & Fail Secure)
    Part # 050240 24 VDC (Fail Safe & Fail Secure)

    G0502xx
    As low as $90.20
  2. Detex ECL-230D Alarmed Panic Device

    The Detex ECL-230D Alarmed Exit Device is a battery operated, rugged deadbolt panic device. The steel paddle is photo-luminescent sign providing managed security and a 100 decibel alarm for secondary exits. The device features a single point 1" dead bolt, attack resistant design withstands over 2200 pounds of outside pull force and is non handed. Locking and unlocking the dead bolt always arms and disarms the alarm.  Rim Cylinder is not included.

    If you have a door that requires Panic Hardware, then use the ECL-230D-PH

    ECL230D-
    As low as $351.99
  3. Detex ECL-230D-PH Alarmed Panic Device

    The Detex ECL-230D-PH Alarmed Exit Device is a battery operated, rugged deadbolt panic device, and is UL-Listed Panic Hardware for 36" to 48" doors. The steel paddle is photo-luminescent sign providing managed security and a 100 decibel alarm for secondary exits. The device features a single point 1" dead bolt, attack resistant design withstands over 2200 pounds of outside pull force, and is non handed. Locking and unlocking the dead bolt always arms and disarms the alarm. Rim Cylinder is not included.

    ECL230DPH-
    As low as $407.01
  4. Corbin Russwin 650F968 Cylinder Dogging Sub-Assembly

    The Yale 7000 and Corbin Russwin ED4000/ED5000 Cylinder Dogging Sub Assembly is used on non Fire Rated Yale and Corbin Russwin panic devices.   Like the Hex Key Sub Assembly, this one is for use with a Key Cylinder.

    Yale Part # 60-7000-0407-999
    Corbin Russwin Part # 650F968

    G6070000407
    $8.86
  5. Dorma 8400 Surface Vertical Rod Panic Device

    Dorma 8400 Surface Vertical Rod Exit Device minimize forced entry while offering a low-cost solution to life safety requirements. Certified/listed to ANSI/BHMA 156.3 Grade 1 for exit devices. 5 year limited warranty.

    8400EO-
    As low as $607.20
  6. Dorma R08 Lever Trim

    Dorma R08 Lever Trim, Key-In-Rectangular Lever Entrance by Lever Includes DORMA Key-In-Lever Cylinder 7013SC

    R08
    As low as $251.74
  7. Cal Royal 4400 Rim Panic Device

    The Cal Royal 4400 Rim Exit Device has a Grade 2 rating. The device features a 3/4" Latchbolt, Roller Strike and a 1" diameter Crossbar. The device comes in a brushed chrome and dark bronze finish, and comes with either a 36" or 48" crossbar. You would need a 4-1/2" minimum stile width. 

    CR4400-
    As low as $163.19
  8. Yale 1500 Panic Device

    Yale 1500 Exit Device

    1500-36 For openings up to 36" (0.91m) wide.
    1500-48 For openings up to 48" (1.22m) wide.
    Strikes 799 Rim Strike (Single Doors)
    Stile Minimum Stile width: 4-1/2" (114mm)
    Hand Field Reversible

    1500EO-
    As low as $1,180.25
  9. Adams Rite 8200 Exit Device

    Grade 1 Exit Device
    Device is non handed
    Standard sizes are 30", 36", 42" or 48"
    Minimum stile width is 2"

    Replacement parts are also available

    AR8200-
    As low as $725.79
  10. Corbin Russwin ED5400 Panic Device

    Corbin Russwin ED5400 Exit Device

    Handing
    Device is handed but easily field reversible.
    Lever trim is handed.
    Bar Length
    Easily field cut to size.
    Standard: 36" (914mm) bar fits 30"- 36" door.
    Door Thickness
    1-3/4" (44mm) standard.
    Stile
    Minimum width 4-1/2" (114mm).
    Door Height
    Standard top rod for 7' door.

    Replacement parts are also available

    ED5400
    As low as $1,210.79
  11. Von Duprin Strike 264

    The Von Duprin Strike 264 measures 2-7/8" tall by 1-1/4" wide with a roller projection of 9/16". Used on the Von Duprin 22, 88, 98 and 99 when a lower profile strike is need in place of the Von Duprin 299 Strike. The hole spacing is 2-1/8" on center, and it ships with mounting screws and a shim. Also known as a Von Duprin Surface Roller Strike.

    Von Duprin Part # 264

    264
    $79.70
  12. Von Duprin Strike 1609

    The Von Duprin Strike 1609 strike is used when we have a double door application without a center post. By using this strike we can have one door with a surface vertical rod and one door a rim device, which will save money because vertical rods are usually expensive. This strike can be used with the Von Duprin 22/2227, 88/8827, 98/9827 and 99/9927 combinations. The strike base measures 1-1/16" wide by 3-1/4" high, the lip projects out 7/8". The three slots are 1-1/4" on center. This strike ships with the mounting screws.   This Strike is not rated for Fire Doors, which are usually interior corridor doors.

    Von Duprin Part # US19-Black finish

    1609
    $79.70
  13. Von Duprin Strike 299

    The Von Duprin Strike 299 is used on the 22, 88, 98, and 99 Rim Devices and also as a Top Strike on the 2227, 8827, 9927, and 9827 Surface Vertical Rod Panic Devices. The 299 strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16".  Ships with shim and mounting screws.

    299
    $50.35
  14. Von Duprin Strike 299F

    The Von Duprin Strike 299F is used on the 22, 88, 98, and 99 Fire Rated Rim Devices (no hex or cylinder dogging). The 299F strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16". The non fire rated version would be the Von Duprin Strike 299.  Ships with shim and mounting screws.

    Von Duprin Part # 299F

    299F
    $62.62
  15. Von Duprin Strike 304L Bottom Strike

    This Von Duprin Strike 304L Bottom Strike is used for the bottom latch of the 2227, 8827, 9827 and 9927. The strike measures 1-7/8" by 1-7/8" out dimension of the square flange, with an inside dimension of 1-1/8" by 1-1/8". The part that is inserted into the floor is 1-5/16" x 1-5/16" and drops down 13/16". Also known as a Von Duprin Floor Mounted Mortise Strike.

    Von Duprin Part # 304L

    304L
    $43.26
  16. Von Duprin Strike 248L-4

    The Von Duprin 248L-4 Strike is used as a Bottom Surface Mounted Strike on the 2227, 8827, 9927, and 9827 Surface Vertical Rod Panic Devices. The 248L-4 strike measures 9/16" wide by 2-1/2" high with a hole spacing of 1-7/8. The strike projects out 3/8".  Ships with shim and mounting screws.  Burnished steel construction.

    Von Duprin Part # 248L-4

    248L-4
    $47.82
  17. Panic Hex Key 3/16"

    The Panic Hex Key 3/16" is used on some of the Corbin Russwin panic hardware.  The key measure 3/16" hex by 2-1/4" long.  At this point we do not know of any other manufacture that uses this size key.  Also known as Hex Key, Dog Key, Allen Key, Dogging Key.

    88R60316
    $3.92
  18. Corbin Russwin ED6000 Tenion Sub Assembly 378F74

    The Corbin Russwin ED6000 Tenion Sub Assembly 378F74 fits inside the cross bar.   As the cross bar screw is tightened the Tenion expands and secures the cross bar.  This is usually the problem when the latch bolt will not extend.  The lifting of the cross bar is done by the hinge case spring, and if the Tenion is not tight, the cross bar will twist.

    Corbin Russwin part #378F74


    ED6200-3700 PARTS BREAK DOWN

    G37060
    $32.89
  19. Corbin Russwin 704F66 ED4000/5000 Series End Cap

    The Corbin Russwin 704F66  ED4000/5000 Series End Cap is their newer impact resistant cover.   The package ships with the End Cap, Bracket and Mounting Screws.  The new bracket my not fit your existing holes, but this end cap is a substantial improvement over the previous versions.  Our image shows the Stainless Steel version.  This end cap is known as the 704F66 for Corbin Russwin, and ECK7 for the Yale version.

    G704F66-
    As low as $83.49
  20. Corbin Russwin ED8200 Rim Strike

    Corbin Russwin ED8200 Rim Strike

    Corbin Russwin part # 386F45

    This strike was used on the ED8200, 29, and 372.

    G386F45
    $45.54
  21. Corbin Russwin ED6000 Cross Bar Screw 261F31

    The Corbin Russwin ED6000 Cross Bar Screw 261F31 is still available, but the Panic Hardware is not.  In November 2015 the ED6000 was discontinued.  The screw is a 5/16 - 24 x 1-1/2" socket head machine screw.


    ED6200-3700 Parts Break Down

    G37050
    $3.80
  22. Corbin Russwin ED4000/5000 Rim Strike 650F29

    The Corbin Russwin ED4000/5000 Rim Strike 650F29 is used on the ED4200 and ED5200 Rim Panic Hardware.  A Rim device is an exit device that has the latch bolt protruding from the center case.

    Corbin Russwin part # 650F29

    G650F29
    $94.88
  23. Cal Royal Panic Device 7000 Alarmed

    Cal Royal 7000 Alarmed Exit Device

    Same as the Cal Royal 7700, but with these added features"

    Alarm unit has internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. The key switch to turn alarm off is a standard 1 ¼” cylinder with “C” keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with a switch that monitors push rail only. Unit includes “EMERGENCY EXIT ONLY • ALARM WILL SOUND” decal for application on door or unit.

    ALRM7700
    As low as $598.09
  24. Rim Cylinder

    Rim Cylinder

    Standard Rim Cylinder for use on Rim Cylinder activated exit and panic devices.

    RIM
    As low as $37.95
  25. Corbin Russwin 552F36-8 ED8200 Active Head Assembly

    Corbin Russwin 552F36-8 ED8200 Active Head Assembly

    This active head is used on the Corbin Russwin ED8200, Russwin 372, and the Corbin 29 Rim Exit Devices. The springs usually wear or break on this item over years of use.

    Corbin Russwin Part # 552F36-8, or the old number 438F40

    G552F36
    $121.44
  26. Corbin Russwin 491F57-8 ED8000 Dogging Assembly

    Corbin Russwin 491F57-8 ED8000 Dogging Assembly

    Used on the Corbin Russwin ED8000 Series, ED8200 and ED8400 to lock the Panic Bar in the down, or locked open position.

    Corbin Russwin Part # 491F57-8, old number 491F56

    G491F57
    $45.54
  27. International Door Closer 8610S Rim Device-Grade 1

    International 8610S Rim Device-Grade 1

    DC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.

    Non handed, 4-1/2" minimum stile width. Smooth Surface.

    8610S-
    As low as $408.60
  28. International 8000 Series 89L Escutcheon Trim

    International 89L Escutcheon Trim

    Clutched lever trim for use with the 8000 Series International Door Closer Exit Devices. Escutcheon measures 8-27/32" high by 2-15/16" wide by 15/16" thick. Trim is non handed and easily converted in the field. We offer 3 functions, Classroom, Passage and Storeroom.

    Classroom - cylinder (not included) locks and unlocks lever handle
    Passage - no cylinder hole, lever always active
    Storeroom - cylinder (not included) unlocks lever, but lever is always locked when key is removed.

    89L01-
    As low as $202.74
  29. International Door Closer 8630S SVR Device-Grade 1

    International 8630S Surface Vertical Rod Device-Grade 1

    DC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.

    Non handed, 4-1/2" minimum stile width. Smooth Surface.

    For doors 29" to 36" wide order the Size 30 to 36"
    For doors 36" to 48" wide order the Size 48"

    8630S-
    As low as $549.64
  30. International Door Closer 5510S Rim Device

    International 5510S Rim Device-Light Duty

    All devices are non-handed design
    Auxiliary guarded latch deadlocks latch bolt automtically locks when the door is closed
    High shock-resistant latching mechanical design or protection from vandalism
    All inside components are made of high rust-resistant alloy or heavy electroplated steel

    Standard 36”: Device length is 33 15/32” (850mm) for 3’ door use, with a standard push bar.
    Long 48”: Device length is 44 3/4” (1137mm) for 4’ door use, with long push bar.

    5510S-
    As low as $129.89
  31. International Door Closer 5530S SVR Device-Light Duty

    International 5530S Surface Vertical Rod Device-Light Duty

    All devices are non-handed design
    Auxiliary guarded latch deadlocks latch bolt automtically locks when the door is closed
    High shock-resistant latching mechanical design or protection from vandalism
    All inside components are made of high rust-resistant alloy or heavy electroplated steel

    Standard 36”: Device length is 33 15/32” (850mm) for 3’ door use, with a standard push bar.
    Long 48”: Device length is 44 3/4” (1137mm) for 4’ door use, with long push bar.

    Standard vertical rod accommodates 7’ or 8’ doors

    We offer the aluminum and dark bronze finish online, the polished brass and stainless steel finishes are available.

    5530S-
    As low as $233.58
  32. International 5000 Series 58L Escutcheon Trim

    International 58L Escutcheon Trim for the 5000 Series Devices

    Non-handed, easily install with exit device Escutcheon plate measures 8-1/16" tall by 2-5/8" wide by 29/32" thick. We offer 3 functions, Classroom, Passage and Storeroom.

    Classroom - cylinder (not included) locks and unlocks lever handle-Most Popular
    Passage - no cylinder hole, lever always active
    Storeroom - cylinder (not included) unlocks lever, but lever is always locked when key is removed.

    58L01-
    As low as $87.60
  33. International Door Closer 7301 Rim Device

    International 7300 Rim Device

    Modern flat touch bar Rim Panic exit device. This series offers durability, safety and meets the security demand and access control needs of today. Series 7300 Rim Panic exit devices are used with Narrow, Medium and Wide aluminum door and Hollow Metal and Wood Door applications. Series 7300 is non-handed, Field Reversible for LHRB or RHRB doors. Outside Unlatching and Dogging by Cylinder Key or Dogging by Hex Key in Touch Bar. Standard Units for 36” and 48” in widths (cut bar to fit). Can be used on 30” wide doors.

    7301-
    As low as $183.43
  34. International Door Closer 7101 CVR Device

    International 7100 Concealed Vertical Rod Device

    Modern flat touch bar Concealed Vertical Rod Device Panic exit device. This series offers durability, safety and meets the security demand and access control needs of today. Series 7300 Rim Panic exit devices are used with Narrow, Medium and Wide aluminum door and Hollow Metal and Wood Door applications. Series 7300 is non-handed, Field Reversible for LHRB or RHRB doors. Outside Unlatching and Dogging by Cylinder Key or Dogging by Hex Key in Touch Bar. Standard Units for 36” and 48” in widths (cut bar to fit). Can be used on 30” wide doors.

    7101-
    As low as $207.40
View as Grid List

Items 1-36 of 427

per page
Set Descending Direction
Page