The Norton Door Closer Parallel Arm Bracket is the bracket shipped with the Norton 1600, 7500, 8301, 8501 and 9300 series closers. This bracket is also used by Yale on there 2300, 50, 3301, 3501 and 4400 door closers. The factory part number on this is 1618A for Norton and 289A for Yale.1600PA-As low as $22.77
Center Hung Door Closer
• Available (NHO) non-hold open, or (SHO) selective
hold open. Specify degree (90 or 105°)
• Standard top pivot: 340 included
• Cycolac cement case
• Separate independent valves for closing,
latch and backcheck adjustments
• Built-in positive dead stop prevents door
from swinging beyond desired opening
• Vertical and horizontal door adjustment
• Arm centering adjustment28As low as $736.23
The Sargent Door Closer Hold Open Arm 25-H is known as a Friction Hold Open Arm. As the arm rotates it tightens the two plates together until they can not turn any more, and holding the door open. To close you just pull the door and it will "unscrew". The hold open position is adjustable by tightening or loosening the larger nut.
Sargent part # 25-H350HOA-As low as $185.96
Sargent Hold Open Pa Bracket
Sargent part # 125-PH9350HPA-As low as $26.57
The Yale Door Closer 4400 has been around for quite a long time, and was designed to replace the older 400, which are still made. The beauty of the 4400 is that is can be mounted left or right, push, pull or top jamb, were as the 4200 you had to specify all those attributes, which made stocking them a head ache. This is a Grade 1 closer, and is extremely durable. If you are looking for a 4400BF, the barrier free version, the new 4400 is barrier free, and will do the trick. This closer has a 2-3/8" x 6-3/4" hole spacing.4400-As low as $338.70
The Norton Door Closer 9300 is a lighter weight version of the 1600. This door closer is a Grade 3 closer, and is designed for light commercial use. This door closer has a fixed spring, so the tension can not be adjusted. The version we send is for a 36” door, and features adjustable closing, latching and back check speeds. The hole spacing on this door closer is 3/4” x 9-1/16”.9300-As low as $164.45
The Cal Royal Products 300 Series Door Closer comes in two versions. One version is the size 3 to 6 spring, which would be for larger exterior doors. The 3 to 6 spring size is for doors 36" to 48" wide. The second version is the size 1 to 4 spring size. The 1 to 4 is considered a Barrier Free door closer, because the spring tension can be turned down to less than 8 pounds of resistance, making the door easy to open. The 1 to 4 should be used on interior doors and smaller, less than 36" wide exterior doors. This door closer is a standard template closer with a hole spacing of 3/4" x 9-1/16" center to center, which is what we find on many aluminum framed glass storefront doors. This closer has a 5 year warranty and is considered a Grade 1 closer, the heaviest duty rating possible.300P-As low as $82.23
The International Door Closer 8051-TP Series is an ideal replacement closer for just about any Store Front Door. We recommend this closer because it will fit any size door, and you can adjust the spring tension to make it easier for the elderly, smaller children and the handicapped. The 8051 will work in interior or exterior doors, and will meet ADA codes. This door closer will work on a Right or Left Hand Door, Push or Pull side or Top Jamb mounting, it ships with a parallel arm bracket, arm and mounting screws along with a full plastic cover. We ship the 8051-TP DU or 8051-TP AL depending on the color you choose. Length of Closer is 9-3/4”, Horizontal Mounting Holes 9-1/16”, Vertical Mounting Holes 3/4”, overall height is 4-21/32” with height of l1-21/32”, and projects 2-29/32” from the door face. The 4 adjustment valves are Closing and Latching Speed, Power and Back Check.8050-
The LCN Door Closer 4011 is known as the Smoothee. The door closer ships with regular arm, standard plastic cover, and self reaming and tapping screws. This is considered an application specific closer, meaning you have to specify left and right swing door, and it can only be mounted as a regular armed closer. A regular armed closer is a closer that is mounted on the pull side of the door. The non sized clinder will work on doors from 30" to 60" interior doors, or 26" to 48" exterior doors, and can be adjusted to meet ADA specifications. This door closer is ideal for areas of high traffic and abuse, like schools or any other areas of extreme use. We ship the 4011 REG.4010As low as $316.25
The Jackson Door Closer Offset Arm 20-900-LC is used with the 20-330 concealed closer for single acting offset mounted doors. The arm measures 12-15/16" long by 1/2" thick with a 1.012" offset. The track measures 25/32" deep by 29/32" wide by 14" long. The track includes the nylon slide, pin and retaining clips.
Jackson Part # 20-900-LCG20900LC$116.70
The Jackson Door Closer Center hung Arm - 20-400B is used with the 20-330 door closer. This arm is for use with double acting, center hung doors. The arm measures 10" long by a 1-1/2" wide and 1/2" thick.
Jackson Part # 20-400BG20400B$50.28
The Jackson Door Closer Center Hung Arm 20-2085 is for double acting center hung doors for use with the 20-330 concealed closer. The arm measures 9-1/2" long by 1-3/8" wide by 19/32" thick.
Jackson Part # 20-2085G202085$50.28
• Available (NHO) non-hold open,
hold open. Specify degree (90, or
• Standard top pivot: 180 included
• Cycolac cement case
• Separate independent valves for closing,
latch and backcheck adjustments
• Built-in positive dead stop prevents door
from swinging beyond the desired
• Vertical door adjustment
When Less All Parts is selected only the Cylinder is shipped, just the replacement hydraulic cylinder will be shipped27-RIXAs low as $853.88
The Corbin Russwin Hold Open Arm Parallel Bracket is the standard bracket shipped with the Hold Open Arm. This replacement bracket will work on the older Corbin 100, 110, and 120's, and the Russwin 2800, 2810 and 2820's. Along with the DC3210 and DC6210 Door Closers. This bracket used by the hold open arm for parallel arm applications only. Corbin Russwin part # 509F49.2800HPAAs low as $42.38
The LCN Door Closer 1261 Series combines the best features from the previous 1070 and 1370 into a single versatile and economical cast iron closer, with Tri mounting capability. The 1261 is the door closer I would recommend if you are tired of replacing your store front door closers because of leakage. The 1261 is the most heavy duty standard template closer that is made. This door closer will work on the push, pull or top jamb, and is non handed. The 1261 is adjustable spring sizes 1-5 and mounts to the most common commercial footprint. The 1261 also features a complete line of regular and extra duty arms, LCN’s peel-n-stick installation templates, a convenient spring adjust pointer. The hole spacing is 3/4" x 9-1/16", so it is considered a standard template closer. LCN also offers a 20 year warranty on this closer.
We ship the 1261 Rw/PA1260-As low as $207.46
The Global Door Closer TC4361 is recommended for use on heavy duty commercial, architectrual and institutional applications. It is ideal for business, new construction and renovations. It has a full selection of accessories to accomodate the requirements of any field installation. It is tri-packed standard and comes with all fasteners, brackets and soffit plates for versatility. Closers with non-hold open arms are UL listed for "A" label fire doors. Fully compliant with opening force requirements for ADA and ANSI/BHMA standards.
Options: Specify when Ordering
- Finish - AL, DU
The hole spacing is 1" by 7-1/2"TC4361-As low as $120.18
The Norton Door Closer 7701-13 Hold Open Loop Assembly is usually the part that breaks on the Norton 1600, 9300, 8301, 8501 and 7500 Hold Open Door Closers. The cast iron piece attached to the disk is where they usually break. This part has had a few part numbers over the years, for Norton it has been known as the 1620-13 and 7701-13, and for Yale the 400-13.16H300-As low as $70.84
The International Door Closer 200 Series Overhead Concealed Closer has been in there line up for at least 20 years. It is designed as a replacement for the Jackson 20-330 concealed closer. This closer is a fixed spring closer with two adjustment valves, one for closing and one for latching speeds. It has a built in positive back stop and hold open positions, if you order the hold open option. To order select the desired opening swing (90 or 105 degrees) and hold open or non hold open. This is just the hydraulic cylinder, the arms are sold separately.
2000-B-230 105 with Hold Open
2000-B-231 105 with No Hold Open
2000-B-232 90 with Hold Open
2000-B-233 90 with No Hold Open2000-BAs low as $134.09
The Cal Royal Products 800 Door Closer is one of there newer closers. The CR801 has a hole spacing of 3/4" x 12" and ships with either a full cover or slim cover. The full cover will hide both spindles, were as the slim cover will not. This closer is a Grade 1 closer, the heaviest rating possible. The cylinder has adjustable spring tension, closing, latching and back check speeds. It can be mounted on the push, pull or top jamb. The CR801 will work in place of the Norton 8000 and Yale 3000 series door closers, with no new drilling.
CR801S - SLIM COVER
CR801 - FULL COVER
Ships within 24 hours from California.CR800-As low as $108.79
The International Door Closer 1804BC-P - Fixed Spring Closer is one of the heaviest duty closers in the International product line. It offers a 10 year warranty, and is Grade 1 rated, which is the highest rating you can have. The closer features three adjustment valves for closing,latching speeds and one for back check. The cylinder is constructed of precision cast aluminum. It ships with a regular arm and parallel arm bracket. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. This door closer is for use on doors up to 48” interior or 36” exterior doors.
3/4" X 9-1/16" Hole Spacing1804-
The LCN Sentronic Door Closer 3130SE is shipped with a standard arm, 24V or 120V SE track (please specify), track roller, and wood and machine screw pack. Sized cylinders for interior doors to 4’0”. Functions as full rack and pinion door closer when hold-open is not engaged or current is interrupted. Handed for right or left swinging door. Interfaces with fire alarm systems.
LCN Sentronic Door Closer 3130SE parts are also available.3130SE$615.74
LCN Sentronic Door Closer 4040SE-3210 Transformer
Sheet metal mounting plate measures 4-1/8" x 4-1/8". Black wire is 115 VAC, 60 HZ. Green Wire is 24 VAC, 400MA
LCN Part # 4040SE-32104040SE-3210$69.58
Hager 5100 Series Door Closer
Hager 5100 Series Grade 1 door closer is constructed of cast iron, which makes it ideal for heavy duty, high use and abusive environments. Hager door closers are the only closers in the industry that are both BHMA certified and backed by a lifetime warranty.
The 5100 matches the hole spacing of the LCN 4040 or 4040XP5100-As low as $251.74
Hager 5300 Series Door Closer
Hager 5300 Series Grade 1 door closer is ideal for schools, hospitals, and other high abuse and high traffic environments. It is constructed of an aluminum alloy and provides smooth door control. The 5300 Series door closer is easy to install and maintain keeping your building safe and secure.
The Hager 5300 Series Door Closer body has a hole spacing of 3/4" x 9-1/6".5300-As low as $164.45
Actuator 6" diameter, with blue engraved lettering, with text.8310-852T$188.80
Actuator 4-3/4" square, with blue engraved lettering.8310-853$180.26
Actuator 4-1/2" diameter, with blue engraved lettering.8310-856$143.26
LCN Sentronic Door Closer Arm - 4010SE-3077T
LCN part # 4010SE-3077T
This arm will only work on the 4010SE. If you have another LCN Sentronic Model, we can order the arm you need. For us to do that we would need to know which model you have (4110SE, 4010SE, ect..) and the hand of the door, see diagram. This arm is for a discontinued LCN Door Closer. We can not allow returns, each arm is specail ordered.4010SE-3077T$122.71
Dorma 8616 Door Closer
The Dorma 8616 door closer series is a non-handed surface applied door closer with adjustable spring power and back check positioning adjustment. It provides the flexibility needed to meet the many demands of commercial and institutional applications, including ADA barrier-free accessibility requirements.
Door closer certified for ANSI Grade 1.
we ship the Dorma Model # 8616-AF89P
3/4" x 12" hole spacing8616-As low as $251.74
The LCN Door Closer 4041XP-Hw/PA is the 4040XP, eXtra Protection closer with the 4040XP-3049 Hold Open Arm. You get the same performance of one of the most revered closers with the functionality of the friction hold open arm. The cylinder features cast iron construction, forged steel arm, double heat treated steel pinion, non-handed, LCN® “Green Dial” spring force indicator, Peel-n-Stick templates, UL and cUL Listed, 3⁄4″ journal diameter pinion, full compliment bearing, and tested and certified under ANSI standard A156.4, Grade 1. With this package you have the flexibility to mount the closer on a left, right, push, pull or top jamb mount. The hold open point is adjustable by loosening or tightening the hold open nut on the arm.4040H-
The LCN Door Closer Hold Open Arm 3049 has an adjustable nut that allows the door closer arm to lock when they reach a pre select position. This arm can be used on most LCN Door Closers because the Hold Open function is in the arm. If you have a regular armed LCN Closer currently, you can use this arm to make them have the Hold Open function. Two words of warning, they can not be used on an interior fire rated door, and Hold Open arms usually break. The manufactures sell more door closers with regular arms, but we tend to sell more Hold Open arms, meaning they wear out or break a lot easier then Regular Arms.
Specify your current closers model number when ordering.
Not all of the LCN closers have the same shape spindle on the door closer cylinder. The LCN Part #'s on this Regular Arm is: 1260-3049 (non handed), 1460-3049 (non handed), 4010-3049 (handed), 4020-3049 (handed), 4040-3049 (non handed). The fitting for the 4040 is a six sided, the 4010, 4020 and 4110 have a flat sided oval, and the 1260 and 1460 have an eight sided star.3049--As low as $88.55
The LCN Door Closer 4011FL is shipped with fusible link arm, standard plastic cover, and self reaming and tapping screws. Sized cylinders for interior doors to 5’0” and exterior doors to 4’0”. Non-sized cylinder (4011) adjustable for interior doors to 4’6” and exterior doors to 3’6”. Included arm has a fusible link that melts at 120 degrees, allowing to door to close. Door can be closed any time with a gentle pull. Closer mounts hinge side, specify right or left swinging door. 4011 cylinder meets ADA requirements.
We ship the 4011 FL4010FL-As low as $442.75
The LCN Door Closer 4021 FL is shipped with fusible link arm, standard plastic cover, and self reaming and tapping screws. This closer is designed to hold open fire doors, when the fusible link melts, it releases the hold open arm, so the door will close. Sized cylinders for interior doors to 5’0” and exterior doors to 4’0”. Non-sized cylinder adjustable for interior doors to 4’6” and exterior doors to 3’6”. Included arm has a fusible link that melts at 120 degrees, allowing to door to close. Door can be closed any time with a gentle pull. Closer mounts top jamb (push side), specify right or left swinging door. 4021 cylinder meets ADA requirements.4020FLAs low as $442.75
LCN Drop Plate for Parallel Arm Mounting
The 18PA LCN Drop Plates are designed to lower the mounting holes on doors with glass at the top of the door. If your door has a narrow stile at the top of it surrounded by a metal frame, mount the door closer on this plate.
LCN Part #'s
4110-18PA18PA--As low as $48.70
LCN Drop Plate for Top Jamb Mounting
Use the LCN Top Jamb Mounting Plate for applications where the door closer body is mounted on a narrow overhead jamb.
LCN Part #'s
4040-18TJ18TJ--As low as $44.59
Hager 5400 Series Door Closer
This Hager Door Closer is a Grade 2 closer. The hole spacing is 3/4" x 9-1/16" center to center. The closer comes with the ability to go left or right, push, pull or top jamb mounting.
We ship the 5400MLT04, aluminum is in stock, Dark Bronze has a 3 week lead time5400-As low as $101.20