Kickdown Door Holders

The classic kickdown door stop is an excellent way to keep your walls and entryways protected as well as providing ultimate versatility to your commercial doors. Kickdown door stops can be placed on almost any door and give you the option to position your door in whatever way suites you at the time. With more than 40 years of experience, we’ve seen the many benefits and satisfied many customers with this classic design.

View as Grid List

18 Items

per page
Set Descending Direction
  1. 4" Kickdown Door Holder Grand Standard

    4" Kickdown Door Holder Grand Standard

    Frequently we are asked, “What is the heaviest duty kick down holder  you sell?”  The answer to that question is any of  Grand Specialty door holders.  These door stops are American made and simply the best out there.   They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg.  They are constructed of steel, and not cast like all of the other door holders made.

    Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    • No roll pin at pivot point
    • Mallable with a pair of pliers
    • Rubber shoe held on by a screw
    • American Made
    • Zinc plated steel

     The bottom mounting screws holes would be 3-3/8" to the Floor when mounted.

     

    GJ604-
    As low as $10.62
  2. 5" Kickdown Door Holder Grand Standard

    5" Kickdown Door Holder Grand Standard

    Frequently we are asked, “What is the heaviest duty kick down holder  you sell?”  The answer to that question is any of  Grand Specialty door holders.  These door stops are American made and simply the best out there.   They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg.  They are constructed of steel, and not cast like all of the other door holders made.

    Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    • No roll pin at pivot point
    • Mallable with a pair of pliers
    • Rubber shoe held on by a screw
    • American Made
    • Zinc plated steel

     The bottom mounting screws holes would be 4-3/8" to the Floor when mounted.

    made by Grand Specialties 605z 605b

    GJ605-
    As low as $11.74
  3. 6" Kickdown Door Holder Grand Standard

    6" Kickdown Door Holder Grand Standard

    Frequently we are asked, “What is the heaviest duty kick down holder  you sell?”  The answer to that question is any of  Grand Specialty door holders.  These door stops are American made and simply the best out there.   They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg.  They are constructed of steel, and not cast like all of the other door holders made.

    Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    • No roll pin at pivot point
    • Mallable with a pair of pliers
    • Rubber shoe held on by a screw
    • American Made
    • Zinc plated steel

     The bottom mounting screws holes would be 5-3/8" to the Floor when mounted.

    Made by Grand Specialties 606z and 606br
    606BR is not longer manufactured  

    GJ606-
    As low as $12.03
  4. 8" Kickdown Door Holder Grand Standard

    8" Kickdown Door Holder Grand Standard

    Frequently we are asked, “What is the heaviest duty kick down holder  you sell?”  The answer to that question is any of  Grand Specialty door holders.  These door stops are American made and simply the best out there.   They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg.  They are constructed of steel, and not cast like all of the other door holders made.

    Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    • No roll pin at pivot point
    • Mallable with a pair of pliers
    • Rubber shoe held on by a screw
    • American Made
    • Zinc plated steel

     The bottom mounting screws holes would be 7-3/8" to the Floor when mounted.

     Made by Grand Specialties 608z

     

    GJ608
  5. 10" Kickdown Door Holder Grand Standard

    10" Kickdown Door Holder Grand Standard

    Frequently we are asked, “What is the heaviest duty kick down holder  you sell?”  The answer to that question is any of  Grand Specialty door holders.  These door stops are American made and simply the best out there.   They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg.  They are constructed of steel, and not cast like all of the other door holders made.

    Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    • No roll pin at pivot point
    • Mallable with a pair of pliers
    • Rubber shoe held on by a screw
    • American Made
    • Zinc plated steel

     The bottom mounting screws holes would be 9-3/8" to the Floor when mounted.

     Made by Grand Specialties 610z

     

    GJ610
  6. 12" Kickdown Door Holder Grand Standard

    12" Kickdown Door Holder Grand Standard

    Frequently we are asked, “What is the heaviest duty kick down holder you sell?”  The answer to that question is any of  Grand Specialty door holders.  These door stops are American made and simply the best out there.   They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg.  They are constructed of steel, and not cast like all of the other door holders made.

    Another feature is their well constructed rubber shoe can be adjusted down as the rubber shoe wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    • No roll pin at pivot point
    • Mallable with a pair of pliers
    • Rubber shoe held on by a screw
    • American Made
    • Zinc plated steel

     The bottom mounting screws holes would be 11-3/8" to the Floor when mounted.

     Made by Grand Specialties in USA Part # 612z

    GJ612
  7. 4" Kickdown Door Holder Brass Deluxe

    4" Kickdown Door Holder Brass Deluxe

    Popular priced crafted holder for interior doors.
    Has 1/2" adjustment and replaceable steel re-inforced
    shoe for long life. Made of steel with brass plated finish.

    Made by Grand Specialties

    GJ6A
  8. Kickdown Door Holder Rubber Shoe GJ6A

    Kickdown Door Holder Rubber Shoe For The GJ6A

    This shoe is for replacement of the 4" Kick Down Door Holder Deluxe, made by Grand Specialties.

    The shoe has a 9/16" wide slot, included the screw.

    GJ7D
    $2.47
  9. 3" Kickdown Door Holder / Stop Zinc Plated Mickey

    3" Kickdown Door Holder / Stop Zinc Plated Mickey

    Zinc plated cold rolled steel,
    Made in the USA
    3" Arm Length

    made by Grand Specialties

    GJX2M
    $10.66
  10. Kickdown Door Holder Rubber Shoe For The Grand Standard

    Kickdown Door Holder Rubber Shoe For The Grand Standard

    Replacement shoe for the GJ604, 605, 605,
    606, 608, 610, and 612 Grand door stops.
    Includes screw

    GJ208
    $4.68
  11. 4" Kickdown Door Holder FS544

    4" Kickdown Door Holder FS544

    The H.B. Ives FS544 Kick Down Door Holder has been a staple in schools for many years due to its heavy duty construction and inexpensive price.  This is one of our most popular Kickdown Door Holder/Stop for the past 35 years.  It is constructed of durable cast iron, which has great strength characteristics.  The shoe is made of a non-marring rubber, which is replaceable.  The shoe is also held in place with a screw, which makes it a great option in schools and area of high vandalism.  This holder will work on door to floor clearances of 2" or less.  The hole spacing is 7/8" x 1-9/16".

    Made by H.B. Ives

     

    Door Closer Stop Colors

    GJL444-
    As low as $12.38
  12. 5" Kickdown Door Holder FS555

    5" Kickdown Door Holder FS555

    The H.B. Ives FS555 Kick Down Door Holder has been a staple in schools for many years due to its heavy duty construction and inexpensive price.  It is constructed of durable cast iron, which has great strength characteristics.  The shoe is made of a non-marring rubber, which is replaceable.  The shoe is also held in place with a screw, which makes it a great option in schools and area of high vandalism.  This holder will work on door to floor clearances of 3" or less.  The hole spacing is 7/8" x 1-9/16".

    Made by H.B. Ives

     

    Door Closer Stop Colors

    GJL555-
    As low as $13.48
  13. Kickdown Door Holder Rubber Shoe For GJ1154M and GJL444-555

    Rubber Shoe For GJ1154M and GJL444-555 Kickdown Door Stop / Holder

    Replacement rubber shoe
    5/8" insert diameter
    1" base diameter
    8-32 threaded screw

    GJ1154
  14. Kickdown Door Holder Rubber Shoe

    Door Holder / Stop Rubber Shoe

    Replacement Rubber Shoe
    5/8" insert diameter
    1" base diameter
    7/8" overall height

    Ives Part # HRT or FSPART.1075

    GJ
    $2.28
  15. Kickdown Door Holder Rubber Shoe FSPART.1052

    Kickdown Door Stop / Holder Rubber Shoe

    Rubber Shoe for old style GJL444/555 and old style style GJ44's

    1" base diameter
    13/16" over all height
    5/8" outside thread diameter

    GJA
    $4.41
  16. 4" Kickdown Door Holder FS455

    4" Kickdown Door Holder FS455

    The H.B. Ives FS455 is what people think about when they say Kick Down Door Stop.  This design has been around for almost 50 years and is try and true.   Durable and ascetically pleasing to look at.  This door holder features a simple hold and release, activated with a touch of the foot.  They are constructed of cast brass or aluminum depending on the finish that you are looking for.  The rubber tip is a non-marring and is corrugated on the bottom so it will not slide on the floor, and is easily replaceable, look under related products for the replacement shoe.  This holder is for door to floor clearances of less than 2".  This is an ideal door holder for the home, office, church or school.

    Made by H.B. Ives

     

    GJ44-
    As low as $11.22
  17. 4" Kickdown Door Holder FS452

    4" Kickdown Door Holder FS452

    The H.B. Ives FS452 is another classic kick down door stop.  It features a simple hold and release, activated with a touch of the foot, and is constructed of cast bronze or brass depending on the finish you are ordering.  A simple stainless steel spring clip holds the stop in the up position.  The non-marring rubber shoe is replaceable, and they have a corrugated bottom to prevent sliding on the floor and a secure grip.  This stop is shipped with matching finish sheet metal screws.   The 4" model is for door to floor clearances of 2" or less.  The hole spacing is 19/32" x 1-47/64".

    Ives Part # FS452

     

    Plated Door Finishes

    GJ452-4-
    As low as $37.13
  18. 5" Kickdown Door Stop FS452 | Ives FS452 Kick Down Door Holder

    5" Kickdown Door Holder FS452

    The H.B. Ives FS452 is another classic kick down door stop.  It features a simple hold and release, activated with a touch of the foot, and is constructed of cast bronze or brass depending on the finish you are ordering.  A simple stainless steel spring clip holds the stop in the up position.  The non-marring rubber shoe is replaceable, and they have a corrugated bottom to prevent sliding on the floor and a secure grip.  This stop is shipped with matching finish sheet metal screws.   The 5" model is for door to floor clearances of 3" or less.  The hole spacing is 19/32" by 1-47/64".

    Ives Part # FS452

    Plated Door Finishes

    GJ452-5-
    As low as $39.36
View as Grid List

18 Items

per page
Set Descending Direction