Parts

View as Grid List

Items 1-36 of 103

per page
Set Descending Direction
Page
  1. Panic Hex Key 5/32" x 3-1/16" Long

    The Panic Hex Key 5/32" x 3-1/16" Long is a must for Von Duprin 22, 33, 35, 98 and 99 panic hardware.   This key has a longer shaft to reach deeper into the Von Duprin Panic Devices.   This key is also known as Hex Key, Dog Key, Allen Key,  and Dogging Key.

    88R60
  2. Dor-o-Matic 1590 C/Case CVR PB203

    Dor-o-Matic 1590 C/Case CVR PB203

    Covers the latch bolt assembly on the 1590 Rim Device.  Made of die cast metal and electrostatically painted black.

    Doromatic Part # 4270106863 or PB203

    GPB203
    $42.28
  3. Dor-o-Matic 1490 P/Bar E/Cap PB201

    Doromatic Exit Device 1490 Pushbar End Cap PB201

    Cover the end of the 1490 Push Bar.  Made of die cast metal and electrostatically painted black.

    Doromatic Part # 4270106787 or PB201

    GPB201
    $52.04
  4. Dor-o-matic 1490/1590 Pushbar Mounting Bracket PB200

    Doromatic 1490/1590 Pushbar Mounting Bracket PB200

    Cover the end of the 1490 Push Bar.  Made of die cast metal and electrostatically painted black.

    Doromatic Part # 4270106786 or PB200

    GPB200
    $28.12
  5. Dor-o-Matic Panic Device 1590 Pushbar End Cap PB202

    Doromatic Exit Device 1590 Pushbar End Cap PB202

    Cover the end of the 1590 Push Bar.  Made of die cast metal and electrostatically painted black.

    Doromatic Part # 4270106875 or PB202

    GPB202
    $23.14
  6. Panic Hex Key 5/32" X 2-1/8" Long

    The Panic Hex Key 5/32" X 2-1/8" Long is usually used on Dor-O-Matic, Falcon, Corbin Russwin, Von Duprin 55 and 88 and Yale panic hardware.  This Hex Dog Key is not long enough for the Von Duprin 33, 34, 33A, 35B, 98 or 99 Exit Devices.  Also known as Hex Key, Dog Key, Allen Key, Dogging Key

    88R60-SHORT
  7. Panic Hex Key 7/32"

    Rating:
    100%

    The Panic Hex Key 7/32" is used on Dor-O-Matic Falcon and Sargent Panic Hardware to name a few.  The key measures 7/32" hex by 3-1/4" long.   Also known as a Hex Key, Dog Key, Allen Key or Dogging Key.

    88R60732
    $5.73
  8. Dor-O-Matic 1690/1790/2390 Dogging Assembly PBX-16

    Dor-O-Matic 1690/1790/2390 Dogging Assembly PBX-16

    Falcon Doromatic 1690, 1790, and 2390 replacement dogging assy. The dogging assembly is used to dog the door in the open position, so people can enter the building without having to unlatch the door for the inside or with a key on the outside.  The KIT.1197 comes complete with mounting screws.   Some of the earlier version where riveted into the rail, so you might need to drill out the rivets, the screws shipped with KIT.1197 have self tapping thread forming screws.

    Doromatic part # KIT.1197

    Dor-o-Matic 1690 Repair Parts Breakdown
    Dor-o-Matic 1790 Repair Parts Breakdown
    Falcon / Dor-o-Matic 2390 Parts Break Down

    GPBX16
  9. Dor-O-Matic 1690/1790/2390 Dogging Hex Shaft

    The Dor-O-Matic 1690/1790/2390 Dogging Hex Shaft is the piece that your dog key (allen wrench) fits into the lock the device in the open or dogged position.  This shaft is used on the 1690, 1790, and 2390 device.  The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008.  They are basically the same device, with the same parts, just a different name plate.  The part that the hex key fits into is only about 1/4" deep, because of that these tend to get rounded out, so the key will not move the shaft. 

    To remove the old shaft just pull with a pair of Channel Locks or Pliers.  To reinstall, just press it back in to position, you might have to bend the holding tabs back down, but we very rarely have to do this.  The manufacture part number on this is SHAFT.101.

     

    GPBX16-SHF
  10. Dor-O-Matic 1690/1790/1990/2090 Pinion PB5

    Rating:
    100%

    The Dor-O-Matic 1690/1790/1990/2090 Pinion PB5 has been in use since the 1970's.  This gear or pinion is what activates the latch or the rods on the 990, 1090, 1690, 1790, 1990 and 2090 devices.  The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008.  They are the same device, with the same parts, just a different name plate.  The manufacture part number on this is CAM.102, PB5 or PB140.

    1690 parts breakdown

    1790 parts breakdown

    1990 parts breakdown

    2090 parts breakdown

    G199005
  11. Dor-O-Matic 1690/1790/1990/2090 Cylinder Bushing BUSH.102

    The Dor-O-Matic 1690/1790/1990/2090 Cylinder Bushing BUSH.102 fits around the Pinion gear to take up slack and reduce friction.  This piece is now known as the Falcon Panic Hardware BUSH.102, but for many years was called the Dor-o-Matic PB46.

    Dor-o-Matic 990/1990 Repair Parts Breakdown
    Dor-o-Matic 1090/2090 Repair Parts Breakdown
    Dor-o-Matic 1690 Repair Parts Breakdown
    Dor-o-Matic 1790 Repair Parts Breakdown

    G199046
    $4.88
  12. Dor-o-Matic 1690/1990 Traveler Assembly PB88

    Dor-o-Matic Falcon 1690/1990 Traveler Assembly PB88

    Doromatic 1990/1690 traveler assembly. The Traveler Assembly measures about 4-1/8" long, by 7/8" wide and 1/4" thick.  This bracket connects the rods to the exit device Doromatic Part # 4270100013 or PB88

    G199028
    $27.64
  13. Dor-o-Matic 1690/1990 Retractor PB35

    The Dor-o-Matic 1690/1990 Retractor PB35 has been used since the 1970's.  The manufacture has changed names in the last 5 years and now goes by Falcon Panic Hardware. This piece is used the 990, 1690 and 1990 devices.  The pinion rides inside this bracket to raise and lower the internal rods. Parts used with the retractor are the Pinion (G199005), Traveller (G199028) and the Pinion Bushing (G199046). Retractor measures 1-7/8" long by 7/8" wide by 1/4" thick.

    Doromatic part # PB35 or RETRACT.101

    G199035
    $8.14
  14. Dor-o-Matic Exit Device 2090 Assembly Plate

    Dor-o-matic 1090/2090 Assembly Plate.   This plate can be used if your current device has pulled the screws out, or you want to mount a new exit on a wood door.

    Doromatic part #4270100304

    2090 parts breakdown

    G109033
    $32.53
  15. Dor-o-Matic 1990 Housing and 1090 2090 Inactive Housing DCX

    The Dor-o-Matic 1990 Housing and 1090 2090 Inactive Housing DCX has been around since the early 1970's.  Although it is now called a Falcon 1990, it is still the same device.  This housing is also the inactive housing on the Dor-O-Matic / Falcon 1090 and 2090 panic hardware.  The housing includes all of the interior springs, arm, and dogging screw.  Housing measures 7-1/2" long by 1-3/16" wide.  The center to center distance of the mounting studs is 6-1/4".

    LEFT HAND SHOWN IN PICTURE

    See diagrams for handing.

    Doromatic part #
    4270902784 - right hand dark brown
    4270902782 - right hand aluminum
    4270902785 -right hand black
    4270902778- left hand dark brown
    4270902776 - left hand aluminum
    4270902779- left hand black

    1990 parts breakdown

    2090 parts breakdown

    Door Closer Stop Colors

    G199001
    As low as $170.74
  16. 1990/2090 Dor-o-Matic Stud Housing Mounting PB2

    Doromatic Mounting Stud. Male stud mounts to the door and the housing slides over.

    Doromatic part # PB2 and also STUD.101

    Dor-o-Matic 990/1990 Repair Parts Breakdown
    Dor-o-Matic 1090/2090 Repair Parts Breakdown

    G199002
    $4.88
  17. Doromatic Exit Device Stud Mtg (Stretch)

    Same as the G199002, but longer. The Doromatic long stud can be used in conjunction with the GMH124 Jack Nut when the threads have pulled out of your door. Doromatic part # STUD.102
    G199002S
    $5.69
  18. Dor-o-Matic 1690/1990 Rod Bearing PB3

    Dor-o-Matic Rod Bearing. This is the piece that goes over the rod and fits into the traveller to take up slack.

    Doromatic part # BUSH.109 or PB3

    Dor-o-Matic 990/1990 Repair Parts Breakdown
    Dor-o-Matic 1690 Repair Parts Breakdown

    G199003
    $3.68
  19. Dor-o-Matic 1990/2090 "E" Ring RRing.109

    The Dor-o-Matic 1990/2090 "E" Ring RRing.109 is use to connect the concealed rods to the Traveller Assembly (G199028, PB88, or 4270100013).  The rods fit through the traveller and rod bushings, and the Retaining Ring holds them in place.  This piece has a diameter of 1/2".   This item is now under the Falcon name plate.

    Dor-o-Matic 990/1990 Repair Parts Breakdown
    Dor-o-Matic 1690 Repair Parts Breakdown

    G199004
    $1.63
  20. Dor-o-Matic 1990/2090 SPRING.103

    Dor-o-Matic lever arm spring. This spring pulls the cross bar back to the closed postion. The tension spring measures 1-1/4" long by 1/4" diameter.

    Doromatic part # SPRING.103

    G199009
    $4.88
  21. Dor-o-Matic 1990/2090 Spring Retainer SD45

    Dor-o-Matic spring retainer. The retainer fits under the housing, by the dog screw and holds one end of the spring. The spring pin holds the other side.

    Doromatic part # RETAIN.102

    Dor-o-Matic 990/1990 Repair Parts Breakdown
    Dor-o-Matic 1090/2090 Repair Parts Breakdown

    G199045
    $1.63
  22. Dor-o-Matic 1990/2090 Pin Spring RD10

    Dor-o-Matic 990/1990/2090 Lever Arm Pin. This pin is what the spring attaches to.

    Doromatic part # PIN.104

    Dor-o-Matic 990/1990 Repair Parts Breakdown
    Dor-o-Matic 1090/2090 Repair Parts Breakdown

    G199011
    $3.26
  23. Dor-o-Matic 1990/2090 Crossbar Screw 1/4- 20 X 1" PB12

    Dor-o-Matic 990/1090/1990/2090 Cross Bar Screw

    Doromatic part # SCREW.1027

    1/4-20 x 1" Self Tapping Threads

    Dor-o-Matic 990/1990 Repair Parts Breakdown
    Dor-o-Matic 1090/2090 Repair Parts Breakdown

    G199012
    $4.88
  24. Dor-o-Matic 1490/1690/1990 Rod Latch Assembly PB129

    Dor-o-Matic 1490/1690/1990 Rod Latch Assembly PB129

    This latch is also used on the EL versions of the 1490 and 1690.

    Doromatic RL Bottom Latch

    Doromatic part # 4270100521

    Dor-o-Matic/Falcon 990/1990 Repair Parts Breakdown
    Dor-o-Matic/Falcon 1690 Repair Parts Breakdown

    G1990129
    $113.62
  25. Dor-o-Matic 1990/2090 Pivot Pin PB13

    Dor-o-matic 990/1090/1990/2090 Lever Arm Pivot Pin measures 1-1/32" long by 9/32" diameter.

    Doromatic Part # PIN.115

    G199013
    $14.64
  26. Dor-o-Matic 1690/1990 Pullman Latch Assembly PB132

    The Dor-o-Matic 1690/1990 Pullman Latch Assembly PB132 is for use with Electric Strikes only.  This part is also some times called the Dor-o-Matic PL Bottom Latch.

    Dor-o-Matic Falcon part # 4270101482

    G1990132
    $107.52
  27. Dor-o-Matic 1990 Hex Bottom Bolt 4270101830

    Doromatic 1990/1690 Hex Bottom Bolt

    Bottom bolt measures 3" long and is constructed of 1/2" hex stock. Threads onto bottom latch. We also call this GPB352.

    Doromatic part # 4270101830

    G1990133
    $52.04
  28. Dor-o-Matic 1990/2090 Dog Screw PB14

    Rating:
    100%

    Dor-o-Matic 990/1090/199092090 dogging screw. This is the screw that holds down the cross bar when you tighten it.
    The thread is 7/16-14.

    Doromatic part # SCREW.1022

    Dor-o-Matic 990/1990 Repair Parts Breakdown
    Dor-o-Matic 1090/2090 Repair Parts Breakdown

    G199014
    $5.22
  29. Dor-o-Matic 1990/2090 Lever Arm DC15 DC40

    Dor-o-Matic Lever arm.

    Doromatic part # DC15 Lh and DC40 Rh

    Order G199015 for Left Hand and G199040 for Right Hand

    Left hand lever shown for 1990 and the 2090 inactive case.

    Dor-o-Matic 990/1990 Repair Parts Breakdown
    Dor-o-Matic 1090/2090 Repair Parts Breakdown

    G199015-
    As low as $89.45
  30. Dor-o-Matic 1690/1990 Jam Nut PB23

    Dor-o-Matic latch rod jamb nut. This nut prevents the latch from coming the rod. Also known as PB23, or GPB23.

    Doromatic part # NUT.101

    Dor-o-Matic 990/1990 Repair Parts Breakdown
    Dor-o-Matic 1690 Repair Parts Breakdown

    G199023
    $2.45
  31. Dor-o-Matic 1690/1990 Bottom Rod PB25

    Dor-o-Matic 1690/1990 bottom rod. Connects panic bar to the bottom latch

    Doromatic Part # 4270101825 PB25 and GPB25

    Dor-o-Matic 990/1990 Repair Parts Breakdown
    Dor-o-Matic 1690 Repair Parts Breakdown

    G199024B
    $37.41
  32. Dor-o-Matic 1690/1990 Top Rod-PB24

    Dor-o-Matic 1690/1990 Top rod. Connects panic bar to the bottom latch

    Doromatic Part # 4270100017 PB24

    Select the height of your door for the correct rod.

    Dor-o-Matic 990/1990 Repair Parts Breakdown
    Dor-o-Matic 1690 Repair Parts Breakdown

    G199024T-
    As low as $43.73
  33. Dor-o-Matic 1690/1990 Top Rod Latch Assembly PB130

    The Dor-o-Matic 1690/1990 Top Rod Latch Assembly PB130 is also used on the 1390, 1490 and 2390.  This latch has been around since the 1970's,  and is usually the issue if your bottom rod is dragging on the floor.  Although we are calling it Dor-o-Matic, it is actually known as a Falcon SU Top Latch due to a name change 5 or 6 years ago.  This latch rolls over when the device is pressed in and then locks in that position.  When the door closes, the 'U" channel of the latch flips over to a vertical postion and drops the rods.  This latch always uses the PB48 Strike, our part # G199034.  The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008.  They are basically the same device, with the same parts, just a different name plate.  Falcon part # PB130 or 4270101806.

    G199025
  34. Dor-o-Matic 1690/1990 Bracket PB54

    Dor-o-Matic 1690/1990 Bracket PB54

    This bracket is used to mount the top and bottom latches on the 1990 and 1690 Dor-o-matic Panic Exit Devices.

    Dor-o-Matic Part # BRKTASY.101

    G199029
    $58.55
View as Grid List

Items 1-36 of 103

per page
Set Descending Direction
Page