Parts

Corbin Russwin Parts
Selling Corbin Russwin Parts for the past 35 years.

Make sure you click on the Corbin Russwin Parts Image or Text for more
dimensional and pricing
information.

View as Grid List

14 Items

per page
Set Descending Direction
  1. Panic Hex Key 3/16"

    The Panic Hex Key 3/16" is used on some of the Corbin Russwin panic hardware.  The key measure 3/16" hex by 2-1/4" long.  At this point we do not know of any other manufacture that uses this size key.  Also known as Hex Key, Dog Key, Allen Key, Dogging Key.

    88R60316
    $4.60
  2. Panic Hex Key 5/32" x 3-1/16" Long

    The Panic Hex Key 5/32" x 3-1/16" Long is a must for Von Duprin 22, 33, 35, 98 and 99 panic hardware.   This key has a longer shaft to reach deeper into the Von Duprin Panic Devices.   This key is also known as Hex Key, Dog Key, Allen Key,  and Dogging Key.

    88R60
    $5.50
  3. Yale Trim Spring Blue 60-7000-1224-999

    Yale Trim Spring Blue

    Also used on Corbin Russwin and Yale Lever trims. The Blue Spring is for RHR or LH doors. The spring has an outside diameter of 1-1/4".

    Yale Part # 60-7000-1224-999
    Corbin Russwin # 651F62

    exit device handing diagram

    G6070001224999
    $6.26
  4. Yale Trim Spring Red 60-7000-1225-999

    Yale Trim Spring Red

    Same part as the Corbin Russwin Lever Trim Spring. Used on Yale and Corbin Russwin LHR or RH Doors. The spring has an 1-1/4" diameter.

    Yale Part # 60-7000-1225-999
    Corbin Russwin # 651F61

    exit device handing diagram

    G6070001225999
    $6.26
  5. Corbin Russwin ED4000/5000 Rim Strike 650F29

    The Corbin Russwin ED4000/5000 Rim Strike 650F29 is used on the ED4200 and ED5200 Rim Panic Hardware.  A Rim device is an exit device that has the latch bolt protruding from the center case.

    Corbin Russwin part # 650F29

    G650F29
    $104.37
  6. Corbin Russwin 704F66 ED4000/5000 Series End Cap

    The Corbin Russwin 704F66  ED4000/5000 Series End Cap is their newer impact resistant cover.   The package ships with the End Cap, Bracket and Mounting Screws.  The new bracket my not fit your existing holes, but this end cap is a substantial improvement over the previous versions.  Our image shows the Stainless Steel version.  This end cap is known as the 704F66 for Corbin Russwin, and ECK7 for the Yale version.

    G704F66-
    As low as $91.84
  7. Corbin Russwin 650F37-8 ED4200 Active Head

    The Corbin Russwin 650F37-8 ED4200 Active Head is used on the Rim Panic Hardware, for non fire rated doors. A non fire rated door is a door were you can use your allen wrench to dog, or lock, the door in the open position during business hours.  The ED4200 is the narrow stile device.

    Corbin Russwin part # 650F37-8

    G650F37
    $271.35
  8. Corbin Russwin 650F35-8 ED5200 Active Head

    The Corbin Russwin 650F35-8 ED5200 Active Head is used on the Corbin Russwin ED5000 Rim Panic Hardware, for non fire rated doors. For fire rated doors, order the G650F36-8. A non fire rated door is a door were you can use your allen wrench to dog, or lock, the door in the open position during business hours.  The ED5000 is the wider stile device.

    Corbin Russwin part # 650F35-8

    G650F35-8
    $271.35
  9. Corbin Russwin 650F36-8 ED5200A Active Head

    The Corbin Russwin 650F36-8 ED5200A Active Head used on the Corbin Russwin ED5000 Rim Device, for fire rated doors. For non fire rated doors, order the G650F35-8. A fire rated door is a door were you can NOT use your allen wrench to dog, or lock, the door in the open position during business hours.

    Corbin Russwin part # 650F36-8

    G650F36-8
    $292.22
  10. Corbin Russwin ED6000 Cross Bar Screw 261F31

    The Corbin Russwin ED6000 Cross Bar Screw 261F31 is still available, but the Panic Hardware is not.  In November 2015 the ED6000 was discontinued.  The screw is a 5/16 - 24 x 1-1/2" socket head machine screw.


    ED6200-3700 Parts Break Down

    G37050
    $4.18
  11. Corbin Russwin ED6000 Tenion Sub Assembly 378F74

    The Corbin Russwin ED6000 Tenion Sub Assembly 378F74 fits inside the cross bar.   As the cross bar screw is tightened the Tenion expands and secures the cross bar.  This is usually the problem when the latch bolt will not extend.  The lifting of the cross bar is done by the hinge case spring, and if the Tenion is not tight, the cross bar will twist.

    Corbin Russwin part #378F74


    ED6200-3700 PARTS BREAK DOWN

    G37060
    $36.18
  12. Corbin Russwin 491F57-8 ED8000 Dogging Assembly

    Corbin Russwin 491F57-8 ED8000 Dogging Assembly

    Used on the Corbin Russwin ED8000 Series, ED8200 and ED8400 to lock the Panic Bar in the down, or locked open position.

    Corbin Russwin Part # 491F57-8, old number 491F56

    G491F57
    $50.09
  13. Corbin Russwin 552F36-8 ED8200 Active Head Assembly

    Corbin Russwin 552F36-8 ED8200 Active Head Assembly

    This active head is used on the Corbin Russwin ED8200, Russwin 372, and the Corbin 29 Rim Exit Devices. The springs usually wear or break on this item over years of use.

    Corbin Russwin Part # 552F36-8, or the old number 438F40

    G552F36
    $145.00
  14. Corbin Russwin ED8200 Rim Strike

    Corbin Russwin ED8200 Rim Strike

    Corbin Russwin part # 386F45

    This strike was used on the ED8200, 29, and 372.

    G386F45
    $50.09
View as Grid List

14 Items

per page
Set Descending Direction