Strikes

Exit device strikes are common panic parts that might need to be replaced over time. Panic device strikes are important to keeping a panic device functioning, so knowing where to purchase new strikes is imperative. 

Exit device strikes are usually matched to the manufacturer and the manufacturer series. For instance, a Von Duprin 299 Strike will usually not work with a Corbin Russwin ED8200. 

If you know the manufacturer of your panic hardware, look for the strike for that manufacturer. If you are unsure of which exit device strikes or panic device you have, send us a picture of both pieces and we will try to match it to the correct one.   

We have two full web pages that contain exit device strikes that you can purchase online. That’s almost 50 exit device strikes that you can browse on our website. We carry exit device strikes from over 10 brands, each one being completely dedicated to producing high-quality products. 

Place your order of exit device strikes today if you already know which style you need. If not, give us a call or email and we will provide you with prompt customer assistance.

Shop Exit Device Strikes Online

The exit device strikes that we distribute on our web store vary in features. You will find that specific exit device strikes will go best with a certain panic device, usually one with the same manufacturer brand. 

First, locate the brand of panic device that you have. It should be listed on one of our two exit device strikes pages. Next, sort through the exit device strikes of that brand and determine the specific style you need. Our friendly staff members are always here to help you with this if you have any questions while you are shopping. 

We have many styles of panic device strikes such as electric strikes, top and bottom exit device strikes, exit device strikes for rim panic devices and more.

Electric Strikes For Panic Devices

If you are looking for electric strikes, then you may have a Von Duprin brand or HES brand panic device. We carry four styles of Von Duprin exit device strikes and two styles of HES exit device strikes. 

All of the Von Duprin panic device strikes that we sell will work on rim exit devices. Choose from dark bronze or stainless steel versions plus fail-secure (FSE) or fail-safe (FS) versions.

Our product description for the Von Duprin 6114 24VDC Electric Strike contains a diagram that might be useful when installing the part. Be sure to look over the product descriptions to collect any other information about the electric strikes that you were seeking.

The HES electric strikes that we carry are the HES 9400 Electric Strike and the HES 5000 Electric Strike Package. Pick your preferred color or finish from the dropdown menu on each product page. 

Top And Bottom Exit Device Strikes

Among the exit device strikes that we carry are some that were made to be installed on top and some that were made to be installed on the bottom of a panic device. 

The Falcon 2130 Bottom Latch Strike can be used with a few panic devices such as the 19-V, 24-V, 25-V and the XX-V. These panic device strikes can either be recess mounted to the floor or they can fit into the doorway threshold. The Falcon 3788 Top Latch Strike can be used with a few panic devices, too, such as the 18-V, 19-V, 24-V, 25-V and the XX-V.

Sargent offers two styles of bottom exit device strikes. Both the Sargent 624 Bottom Surface Strike and the Sargent 655 Bottom Surface Strike can be used with Series 20, 30, 80 and 90 of surface vertical rod devices. The Sargent 624 Bottom Surface Strike can also be used with Series 60. To install, mount the Sargent 624 to the floor and the latch will lock on.

Yale also manufactures a few styles of bottom and top strikes. This includes the Yale 790 Bottom Strike, the Yale 791 Top Strike and the Yale 794 Bottom Strike.

Rim Exit Device Strikes

We also carry a number of strikes that can be used with rim exit devices. You can tell if you have a rim panic device because it will have a latch bolt that extends beyond its center case. If the product name doesn’t state it, then the product descriptions should state which types of panic devices each of the panic device strikes is compatible with.

The Corbin Russwin ED4000/5000 Rim Strike #650F29 is one of the rim exit device strikes that we carry. These rim exit device strikes can be used with the ED4200 panic device and the ED5200 panic device. The Corbin Russwin ED5200(A) Rim Strike, or #650F30-8, can be used with their panic devices that are fire rated.

Other Corbin Russwin rim exit device strikes that we carry are the Corbin Russwin ED6200 Rim Strike and the Corbin Russwin ED8200 Rim Strike. We also have a few Von Duprin brand strikes that work on rim panic devices.

Let us know if you are uncertain of whether the panic device you have installed is a rim exit device. We will get you the information that you require that will help you complete your online purchase.

Connect With Us: Exit Device Strikes Distributors

Ask us about your order of panic device strikes whether you need more info on a product, you would like to know which panic device your strike is compatible with, or you have questions about shipping and payment. We have been in business for over 40 years and together our staff members have the collective skills to get you the best exit device strikes for the doors in your establishment.

Contact us either by email or phone so that you can speak directly with one of our knowledgeable professionals. You can catch us from 8 a.m. to 5 p.m. Monday through Friday. We are always eager to lend a hand in your door security hardware project.

View as Grid List

Items 1-36 of 49

per page
Set Descending Direction
Page
  1. Adams Rite 22-0430-IP Star Wheel Strike

    Adams Rite 22-0430-IP 8700/8800 Strike is used on the rim devices that have the Star Wheel Latching System.  The strike measures 2-3/4" long by 1-3/4" wide and projects out approximately 3/8".

    G8800STK
    $13.92
  2. Adams Rite 91-0993-IP Star Wheel Strike

    Adams Rite 91-0993-IP 8700/8800 Strike is used on the rim devices that have the Star Wheel Latching System.  The strike measures 2-3/4" long by 1-3/4" wide and projects out approximately 1/2".   Kit comes with mounting screws and two shims.

    G910993
    $27.83
  3. Cal Royal 938 Surface Strike

    The Cal Royal 938 Surface Strike is used on the 7700 and 5000 Series Rim Devices.  The strike includes all the mounting screws.

    G938
    $27.83
  4. Corbin Russwin ED4000/5000 Rim Strike 650F29

    The Corbin Russwin ED4000/5000 Rim Strike 650F29 is used on the ED4200 and ED5200 Rim Panic Hardware.  A Rim device is an exit device that has the latch bolt protruding from the center case.

    Corbin Russwin part # 650F29

    G650F29
    $104.37
  5. Corbin Russwin 650F30 Rim Strike for ED5200(A)

    The Corbin Russwin 650F30 Rim Strike for ED5200(A) is for use on there Fire Rated Panic Hardware.  Manufacture part # 650F30-8

    G650F30
    $90.45
  6. Corbin Russwin ED8200 Rim Strike

    Corbin Russwin ED8200 Rim Strike

    Corbin Russwin part # 386F45

    This strike was used on the ED8200, 29, and 372.

    G386F45
    $50.09
  7. Detex 98 Advantex 100855-1 Semi Mortise

    Detex 98 Advantex 100855-1 Semi Mortise

    98 Semi-Mortise-applied strike for 10 an d40 series Rim Devices

    Detex Part # 100855-1

    DE98
    $44.53
  8. Detex 99 Advantex 100855-2 Surface Strike

    Detex 99 Advantex 100855-2 Surface Strike

    99 Surface - non-roller strike for 10 and 40 series Rim Devices. Base measures 3" high by 1-3/16" wide and projects out 7/8".

    Detex Part # 100855-2

    DE99
    $38.96
  9. Dor-o-Matic Panic Device 2090 / 1790 Standard Strike

    The Falcon / Dor-o-Matic Panic Device 2090 / 1790 Standard Strike is the strike shipped with all new Falcon 2090 and 1790 exit devices.  The strike measures 1-3/4" high, 1-3/4" deep and only comes in a Black Matte color.  This strike was known for a long time as the Dor-o-Matic SD36 Strike, but after changing there name to Falcon in about 2008, it is know known as the Falcon SD36 Strike.

    G2090STK
    $68.19
  10. Dor-o-Matic 1690/1990 Top Strike PB48

    The Dor-o-Matic 1690/1990 Top Strike PB48 is used on the Dor-o-Matic 1690, 1990 and 2390 Concealed Vertical Rod Exit and Panic Devices. The plate measures 1" x 1-1/16" with 4 holes. The mounting holes are 11/16" x 11/16" on center. The diameter of the pin is 7/16" and projects out 5/32". Ships with mounting screws and 3 shim plates.  The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008.  They are basically the same device, with the same parts, just a different name plate.  Falcon part # PB48.

    Dor-o-Matic/Falcon 990/1990 Repair Parts Breakdown
    Dor-o-Matic/Falcon 1690 Repair Parts Breakdown

    G199034
    $25.05
  11. Dor-o-Matic 1690/1990 Top Strike Shim Package-SHIM.112

    Doromatic PB48 Strike Shim Package Of 10 Pieces

    This Dor-o-Matic product is for the PB48 Top Strike. This is the shim that goes under the top strike. The plate measures 1" x 1-1/16" with 4 holes. The mounting holes are 11/16" x 11/16" on center. They are only sold in packages of 10.

    Doromatic Part # SHIM.112

    G199034-SHIM
    $27.83
  12. Doromatic TD35 Roller Strike

    The Falcon TD35 Roller Strike is used with the Dor-o-Matic Falcon 1590, 1790, and 2090 panic device where you are trying to protect the frame when the door closes.   The strike has been manufactured since the 1970's.  This part is also known as a Kawneer 133479 strike.  The strike ships with mounting screws in a painted black finish.   This style of strike is also known as a Blade Strike.

    Doromatic Falcon Part # TD35 or 4270107393

    GTD35
    $101.59
  13. Falcon Dor-O-Matic STK45 Surface Strike

    Falcon Dor-O-Matic STK45 Surface Strike

    This strike is used when we have a double door application without a center post. By using this strike we can have one door with a surface vertical rod and one door a rim device, which will save money because vertical rods are usually expensive. This strike can be used with the 1590, 1790 and 2090 Rim Devices. The strike base measures 1-5/16" wide by 3-1/4" high, and 1/4" thick. The three slots are 1-1/4" on center. This strike ships with the mounting screws.

    US19-Black finish

    STK45
    $87.67
  14. Ives Dust Proof Strike DP1

    Ives Dust Proof Strike DP1

    • Designed for use with the bottom bolt of all flush bolts.
    • Spring-loaded plunger returns to floor or threshold level anytime
    flush bolt is retracted, eliminating need to clean standard
    floor strikes.
    • Strike hole is 3/4" Diameter and 1-1/8" Deep

    DP1 Face Plate: 1-7/16" Diameter
    Body: 1-3/16" Diameter x 1-7/8" Deep

    Plated Door Finishes

    DP1-
    As low as $22.96
  15. Dust Proof Strike DP2

    • Designed for use with the bottom bolt of all flush bolts.
    • Spring-loaded plunger returns to floor or threshold level anytime
    flush bolt is retracted, eliminating need to clean standard
    floor strikes.
    • Strike hole is 3/4" Diameter and 1-1/8" Deep


    DP2 Face Plate: 1-5/8" W x 3-1/2" L x 1/8" Thick
    Body: 1-3/16" Diameter x 1-7/8" Deep

    Plated Door Finishes

    DP2-
    As low as $27.14
  16. Jackson 30-1345 Top Strike Package for the 2085-3185

    The Jackson 30-1345 Top Strike Package for the 2085-3185  is mounted on the frame of the door were the top latch can engage it.   The Package includes the Strike, Plate, Latch Adjusting Wrench and the Mounting Screws.   Jackson Part Number 30-1345.

    G301345
    $36.87
  17. Jackson Panic Device 1095 Standard Strike

    The Jackson Panic Device 1095 Standard Strike is a strike they have been using for the past 20 years.  You might have one of the older roller strikes, but this will work in its place.  The older style roller strike is no longer available.  Jackson Exit Device part # 30-2436.

    G109556
    $50.09
  18. Jackson 300846 1085/1285/2086 Strike Package

    The Jackson 30-1345 Top Strike Package for the 2085-3185  is mounted on the frame of the door were the top latch can engage it.   The Package includes the Strike, Plate, Latch Adjusting Wrench and the Mounting Screws.   Jackson Part Number 30-1345.

    G108588
    $20.88
  19. Falcon 2130 Bottom Latch Strike

    Falcon 2130 Bottom Latch Strike

    The Falcon 2130 Bottom Latch Strike is used on the 19-V, 24-V, 25-V and XX-V devices.  This strike usually fits into the threshold or is recessed into the floor.

    Falcon Part # 2130

    G2130
    $44.53
  20. Falcon 299 Strike

    Falcon 299 Strike

    The Falcon 299 Strike is used on the 25-R and 24-R Devices.  The 299 strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16".  This strike is the same as the Von Duprin 299 Strike.

    Ships with shim and mounting screws

    Falcon Part # 299

    Fa299
    $55.39
  21. Falcon 3788 Top Latch Strike

    Falcon 3788 Top Latch Strike

    The Falcon 3788 Top Latch Strike is used on the 18-V, 19-V, 24-V, 25-V and XX-V panic and fire rated devices.

    Falcon Part # 3788

    G3788
    $47.31
  22. Falcon F570 Strike

    Falcon F570 Strike

    The Falcon F570 Strike for 19-R and XX-R Devices is used on the Fire and Non Fire Rated Devices.  This is the same strike that was used on the Monarch XX-R, 19-R, 17-R and 18-R devices.

    Falcon Part # F570

    570
    $40.36
  23. Sargent 624 Bottom Surface Strike

    The Sargent 624 Bottom Surface Strike is used on the 20, 30, 60, 80 and 90 Series Surface Vertical Rod Panic Hardware.  The Strike is mounted on the floor and the bottom latch locks on to it.   Strike measures 9/16" x 2-1/2" with a 3/8" projection.   Strike features a black coated epoxy.

    Sargent Part #624

    G624
    $69.58
  24. Sargent 646 Surface Strike

    The Sargent 646 Surface Strike is used on the 20, 30 and 80 Series Surface Vertical Rod Panic Hardware and Fire Rated Hardware.  It is used as a strike for the top latch. The strike measures 1-5/32" x 3-11/16"  with a 3/4" projection.   Strike features a black coated epoxy finish.

    Sargent Part #646

    G646
    $96.02
  25. Sargent 649 Surface Strike

    The Sargent 649 Surface Strike is used on the 20, 30, 60 and 90 Series Rim Panic Hardware.  The Strike measures 1-5/32" x 3-11/16"  with a 3/4" projection.   Strike features a black coated epoxy finish.

    Sargent Part #649

    649
    $96.02
  26. Sargent 655 Bottom Surface Strike

    The Sargent 655 Bottom Surface Strike is for use the 20, 30, 80 and 90 Series Surface Vertical Rod Panic Hardware.  The Strike measures 1-13/16" x 2-3/4" x 3/32" thick. 

    Sargent Part #655

    G655
    $40.36
  27. Von Duprin Strike 1409 Blade Stop

    The Von Duprin Strike 1409 Blade Stop is used on just about every Von Duprin Rim Device when door frame protection is needed.  We see this strike on many Narrow Stile door setups.  The strike measures 1-7/8" by 1-3/4" outside dimension. The strike has a projection of 1/2".  The strike is constructed die cast metal and the blade is made of stainless steel.

    Von Duprin Part # 1409

    1409
    $125.24
  28. Von Duprin Strike 1609

    The Von Duprin Strike 1609 strike is used when we have a double door application without a center post. By using this strike we can have one door with a surface vertical rod and one door a rim device, which will save money because vertical rods are usually expensive. This strike can be used with the Von Duprin 22/2227, 88/8827, 98/9827 and 99/9927 combinations. The strike base measures 1-1/16" wide by 3-1/4" high, the lip projects out 7/8". The three slots are 1-1/4" on center. This strike ships with the mounting screws.   This Strike is not rated for Fire Doors, which are usually interior corridor doors.

    Von Duprin Part # US19-Black finish

    1609
    $87.67
  29. Von Duprin Strike 248L-4

    The Von Duprin 248L-4 Strike is used as a Bottom Surface Mounted Strike on the 2227, 8827, 9927, and 9827 Surface Vertical Rod Panic Devices. The 248L-4 strike measures 9/16" wide by 2-1/2" high with a hole spacing of 1-7/8. The strike projects out 3/8".  Ships with shim and mounting screws.  Burnished steel construction.

    Von Duprin Part # 248L-4

    248L-4
    $52.60
  30. Von Duprin Strike 264

    The Von Duprin Strike 264 measures 2-7/8" tall by 1-1/4" wide with a roller projection of 9/16". Used on the Von Duprin 22, 88, 98 and 99 when a lower profile strike is need in place of the Von Duprin 299 Strike. The hole spacing is 2-1/8" on center, and it ships with mounting screws and a shim. Also known as a Von Duprin Surface Roller Strike.

    Von Duprin Part # 264

    264
    $87.67
  31. Von Duprin Strike 299

    The Von Duprin Strike 299 is used on the 22, 88, 98, and 99 Rim Devices and also as a Top Strike on the 2227, 8827, 9927, and 9827 Surface Vertical Rod Panic Devices. The 299 strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16".  Ships with shim and mounting screws.

    299
    $55.39
  32. Von Duprin Strike 299F

    The Von Duprin Strike 299F is used on the 22, 88, 98, and 99 Fire Rated Rim Devices (no hex or cylinder dogging). The 299F strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16". The non fire rated version would be the Von Duprin Strike 299.  Ships with shim and mounting screws.

    Von Duprin Part # 299F

    299F
    $68.88
  33. Von Duprin Strike 304L Bottom Strike

    This Von Duprin Strike 304L Bottom Strike is used for the bottom latch of the 2227, 8827, 9827 and 9927. The strike measures 1-7/8" by 1-7/8" out dimension of the square flange, with an inside dimension of 1-1/8" by 1-1/8". The part that is inserted into the floor is 1-5/16" x 1-5/16" and drops down 13/16". Also known as a Von Duprin Floor Mounted Mortise Strike.

    Von Duprin Part # 304L

    304L
    $47.59
  34. Von Duprin Strike 385A

    The Von Duprin Strike 385A is used on the floor for the Von Duprin 2227, 8827, 9827 and 9927 Surface Vertical Rods. Von Duprin recommends this strike if you are mounting the bottom strike in wood.  The strike face plate outside dimensions are 2-1/4" x 2-1/4" with an inside dimension of 1-1/8" by 1". This floor strike features a bolt that can be cemented into the floor.  This is an optional strike when added security is needed.  Zinc plated finish.

    385A
    $108.54
  35. Von Duprin Strike 499F

    The Von Duprin 499F is used on the 22, 98 and 99 Series Fire Rated Rim Devices when used with the 9954 Mullion.  A Fire Rated Device is one that does not have a dogging pin or screw to lock the door in the open position.

    Von Duprin Part # 499F

    499F
    $160.03
View as Grid List

Items 1-36 of 49

per page
Set Descending Direction
Page