Cal Royal

Our company, RBA Door, is a long-time Cal Royal distributor of Cal Royal Panic Bars, Cal Royal exit trim and most other Cal Royal replacement hardware. We have been selling assorted hardware products for over 40 years. The Cal Royal panic bars and hardware that we sell are used in all kinds of establishments including schools and warehouses.

We offer a large number of Cal Royal Products on our website that we invite you to look through. Make us your go-to Cal Royal distributors for the long run and we will make sure you get the best panic hardware and service for your project.

Cal Royal Exit Device Company

Cal-Royal Products, Inc. has been producing Cal Royal exit trim and products for over 35 years. The company has been dedicated to making high-grade Cal Royal exit trim and panic hardware since their start in 1983.

Cal Royal panic bars and hardware can be found in all sorts of commercial buildings. Their panic hardware has even made its way into The MGM Grand Hotel in Vegas plus Marriott Hotels and Hilton Hotels.

To add even more value to their products, the company made sure that Cal Royal panic devices and Cal Royal exit trim complied with specific guidelines. For instance, they made sure that Cal Royal exit trim and panic devices meet the Americans with Disabilities Act of 1990 (ADA) standards. ADA disallows mental and physical disability discrimination.

The three Cal Royal warehouse locations are California, Florida and Texas. Commerce, CA is also where their main office is located.

At RBA Door, we distribute Cal Royal panic devices and Cal Royal exit trim through our website to online shoppers. We have come to recognize the high quality of these products and are proud to provide a platform where shoppers can conveniently purchase Cal Royal exit trim and parts.

Purchase Cal Royal Products Online

Feel free to browse the Cal Royal panic devices that we sell online. We carry the Cal Royal 2200 Series Exit Devices, plus products from the Cal Royal 7700 Exit Devices Series and the Cal Royal 5000 Exit Devices Series. This includes Rim Cal Royal panic bars plus Cal Royal Surface Vertical Rods.

The Cal Royal 2200 Alarmed Exit Device and the Cal Royal 7700 Alarmed Exit Device are commonly used on emergency exits. These Cal Royal 2200 and Cal Royal 7700 exit devices even come with a decal that you can place on the device or door that reads “EMERGENCY EXIT ONLY. ALARM WILL SOUND.” The product’s horn will sound when the door has been pushed open.

The Cal Royal 2200 Panic Bar Rim Device and the Cal Royal 2200V Surface Vertical Rod are both non-handed and made of heavy-gauge steel. With both of these Cal Royal panic bars you have the option to choose the color and size.

The Cal Royal 7700 Rim Exit Device and the Cal Royal 7760 Surface Vertical Rod Exit Device were built for facilities that require heavy-duty panic hardware. These are both ANSI A156.3, Grade 1 Cal Royal exit devices. With all Cal Royal exit devices on our site, you have the option to choose the size and finish you prefer.

Cal Royal Exit Trim

Among the Cal Royal products that we distribute are various styles of Cal Royal exit trim. The Cal Royal exit trim on our website have different color options.

Take both the Cal Royal 2200 Escutcheon lever and escutcheon trim for the Cal Royal 7700 exit device for example. You can purchase the 2200 Escutcheon Lever Cal Royal Exit Trim in aluminum, gold or dark brown. On the other hand, you can purchase the 7700 Escutcheon Lever Cal Royal Exit Trim in dark bronze or stainless steel.

Other Cal Royal exit trim we carry also have a variety of color options. The 2200 Series Lever Cal Royal Exit Trim can be purchased from our web store in either aluminum or dark bronze. This product is a non-handed Cal Royal exit device trim. It is made for use on doors that have a 1¾” or 2 ¼” thickness.

We have plenty more Cal Royal exit trim available on our web store. From the Cal Royal 7700 Series Dummy Plate and the Cal Royal 7700 Thumb Pc Trim to the Cal Royal 7700 Night Latch Trim and the Cal Royal 2200 Night Latch Trim, we have a ton of Cal Royal exit trim to choose from. We also sell the Cal Royal 7700 Lever Trim and the Cal Royal 2200 and 5000 Knob Trim. See the Cal Royal exit trim product descriptions for more colors.

Cal Royal Exit Device Parts

Cal Royal exit devices and Cal Royal exit trim will sometimes need hardware upgrades. We have just the Cal Royal exit device parts that you may need in this instance.

One of the Cal Royal exit device parts that we carry is the Cal Royal 938 Surface Strike. This strike was made to be used on Cal Royal 7700 and 5000 Series rim devices. It comes with the necessary screws to set it up properly.

Let us know if your door project requires other parts for your Cal Royal 2200, Cal Royal 7700 or Cal Royal 5000 exit devices. We will set you up with top-rated Cal Royal exit device parts for your commercial door.

Customer Support For Cal Royal Exit Devices

Contact our office for help with your order of Cal Royal panic bars, Cal Royal exit trim and hardware. We will go the extra mile to ensure that you receive the perfect Cal Royal panic devices and Cal Royal exit trim for the project you are currently working on.

No questions are off the table. You can ask us about pricing, shipping and handling, payment methods, or about the products themselves. If you feel unclear about something regarding your Cal Royal exit device trim or other products we sell, please reach out. Even if it’s in the product description but you’re still unsure, we are always eager to assist you.

You can ask us about what colors or finishes a Cal Royal panic device or Cal Royal exit device trim comes in such as brass, bronze or stainless steel. You can inquire as to whether a Cal Royal exit device or Cal Royal exit device trim will work with both single and double fire exit doors.

Our overall goal is that you receive the right Cal Royal exit device trim and products for what you are working on with no hassle. Our Cal Royal exit device trim experts are here at our office Monday through Thursday from 8 a.m. to 5 p.m. to streamline the buying process for you for a smooth, relaxed checkout.

View as Grid List

Items 1-36 of 42

per page
Set Descending Direction
Page
  1. Cal Royal Panic Device 7000 Alarmed

    Cal Royal 7000 Alarmed Exit Device

    Same as the Cal Royal 7700, but with these added features"

    Alarm unit has internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. The key switch to turn alarm off is a standard 1 ¼” cylinder with “C” keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with a switch that monitors push rail only. Unit includes “EMERGENCY EXIT ONLY • ALARM WILL SOUND” decal for application on door or unit.

    ALRM7700
    As low as $690.80
  2. Cal Royal Panic Device 7760 Surface Vertical Rod

    Cal Royal 7760 Surface Vertical Rod Exit Device

    For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement. ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs. Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing. Trims are thru bolted for additional security. Conforms & Meets ADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1777 codes. UL Listed for Fire Exit Hardware.

    Templating matches the Von Dupin 99 and 98

    CR7760EO
    As low as $683.78
  3. Cal Royal Panic Device 7700 Rim Device

    Cal Royal 7700 Rim Exit Device

    For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement. ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs. Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing. Trims are thru bolted for additional security. Conforms & Meets ADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1777 codes. UL Listed for Fire Exit Hardware. Uncompromising security and safety in single and double fire exit doors. Chassis mounted unit construction. Rim and vertical rod devices are non-handed and easily reversible. Available in many different functions. Lever and escutcheon trims are grade 1 construction with clutch free-wheeling mechanism. Rose and escutcheon covers 161 cut out.

    Templating matches the Von Dupin 99 and 98

    CR7700EO-
    As low as $522.48
  4. Cal Royal TAIL1 Extender

    The Cal Royal TAIL1 is an extender for the ENTOOL Lever Trim.  The extender works on doors up to 2-1/4 inches thick.  The TAIL1 includes two longer screws, two set screws (not shown), allen wrench, and hub adaptor.

    TAIL1
    $16.00
  5. Cal Royal GLS7700 Narrow Stile Rim Device

    The Cal Royal GLS7700 Rim Device is for use on Aluminum Framed Glass Doors when the Stile width is 1-3/4 inch or more.  The exit device ships with wood and machine screws, along with the Strike plate.  The stainless steel latch bolt has a 3/4 inch throw. This device is a Grade 1, which is the heaviest duty rating.

    GLS7700-
    As low as $546.00
  6. Cal Royal GLSRIM9800

    The Cal Royal GLSRIM9800 is an Entrance Function Lever Handle for the GLS7700 and GLS9800 Narrow Stile Rim Exits.  The Base measures 1-3/4 inches wide by 8 inch tall, with a 2-3/8 inch thick base.

    GLSRIM9800-
    As low as $179.25
  7. Cal-Royal 9800 Rim Device

    The Cal-Royal 9800 Rim Device is a grade 1 Heavy Duty Exit Device.   The 9800 has the same template as the 8800 and 9800 with escutcheon lever trim. The 36 inch device will be 32 inches wide and can be cut down an additional 2" to fit doors as narrow as 30 inches.  The 48 inch will be 44 inches wide and can be cut down to fit doors 36 inches wide. The device is non handed, meaning it will work on a left hand reverse or right hand reverse door. Strike and mounting screws are included.

    9800EO-
    As low as $376.11
  8. Cal-Royal 9000 Series NESC Lever Trim

    Cal-Royal 9000 Series NESC Lever Trim features hardened steel tailpiece and heavy duty spring to prevent sagging. Standard 6-Pin Schlage C mortise cylinder included. Rigid entrance, key locks or unlocks lever.

    NESC9800-
    As low as $158.36
  9. Cal-Royal 9000 Series Lever Trim HDESC

    Cal-Royal 9000 Series Lever Trim HDESC is for use on the 9800 and 9800 Exit Devices. The Trim has a clutch mechanism to prevent breaking and two heavy duty springs to prevent sagging. Escutcheon measures 2-5/8 inches wide by 10-5/8 inches long.  The lever projects out 2-7/8 inches. Key locks or unlocks lever.

    HDESC-
    As low as $249.09
  10. Cal Royal Panic Device 2000 Alarmed

    Cal Royal 2000 Alarmed Exit Device
    Alarm units has an internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. Jumper cable is provided to swich to continuous alarm. The key switch to turn the alarm off is a standard 1” cylinder with “C” keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with two switches. One switch monitors the push rail and the other switch monitors the latch bolt for full proof security.

    Unit includes “EMERGENCY EXIT ONLY. ALARM WILL SOUND” decal for application on door or unit.

    ALM2000
    As low as $306.83
  11. Cal Royal Panic Device 2000V Exit Device

    Cal Royal 2000V Surface Vertical Rod

    Grade 1
    Non handed-field reversible
    Heavy gauge steel, painted
    4-1/2" minimum stile width

    24" wide x 84" high, and 32" wide and 84" high also available in aluminum only

    2000V
    As low as $271.76
  12. Cal Royal Panic Device 2000 Exit Device

    Cal Royal 2000 Series Rim Device

    Grade 1
    Non handed
    3/4" latch bolt throw
    Heavy gauge steel, painted

    Devices available for 32" and 24" wide doors. Please call 1-800-642-2403 for more information

    2000
    As low as $176.56
  13. Cal Royal Panic Device 2000 Series Lever Trim

    Cal Royal 2000 Series Exit Device Lever Trim

    Non-handed Grade 1 (Clutch Style)
    Cylindrical body hardened steel heavy duty tailpiece. For
    1¾” and 2 ¼” doors. Prefix THI before part # for 2 ¼” door
    thickness. Available for fire and non fire rated rim and
    vertical rod exit devices.
    Rose diameter 3 ½”, lever length 4 ¾”.

    ENTOOL-
    As low as $135.29
  14. Cal Royal 4400 Rim Panic Device

    The Cal Royal 4400 Rim Exit Device has a Grade 2 rating. The device features a 3/4" Latchbolt, Roller Strike and a 1" diameter Crossbar. The device comes in a brushed chrome and dark bronze finish, and comes with either a 36" or 48" crossbar. You would need a 4-1/2" minimum stile width. 

    CR4400-
    As low as $188.49
  15. Cal Royal 4400 Escutcheon Lever Trim

    The Cal Royal Escutcheon 4400 Lever Trim is non handed (easily field reversible), thru-bolted, rigid non clutch lever for the 4400 Rim Device. The key locks or unlocks the lever. The Escutcheon measures 2-3/4 by 8-1/2 inches, the lever length is 4-3/4 inches. Ships with a 6 pin solid brass "C" keyway Rim Cylinder.

    ESC44
    As low as $145.00
  16. Cal Royal 4400 THP4400 Thumbpiece Trim

    The Cal Royal 4400 Thumbpiece Trim is for use on the 4400 Rim Device only. The plate measures 3-1/2 by 16 inches. The key locks or unlocks the thumbpiece. This plate ships with a 6 pin solid brass "C" keyway rim cylinder. And only comes in brushed chrome and dark bronze finishes.

    THP4400-
    As low as $74.05
  17. Cal-Royal 45 Narrow Stile Rim Device

    The Cal-Royal 45 Narrow Stile Rim Device is part of the new 4500 Series.  They are designed for Narrow Stile doors with a minimum of an 1-3/4" stile width.  This is a Grade 1 Exit Device, which is the highest traffic rating possible. Exit device ships with strike and mounting screws.

    Shown is Left Hand Reverse
    Opposite would be Right Hand Reverse

    45-RIM
    As low as $194.66
  18. Cal-Royal 45 Narrow Stile Surface Vertical Rod

    The Cal-Royal 45 Narrow Stile Surface Vertical Rod is part of the new 4500 Series. They are designed for Narrow Stile Doors with a Stile width of at least 1-3/4 inches. The device is rated as a Grade 1, which is the heaviest traffic rating possible. They ship with all mounting hardware and strikes.  This device is non handed and uses a Allen Type dogging system.

    45-SVR
    As low as $315.07
  19. Cal-Royal 4500 Series Lever Trim

    The Cal-Royal 4500 Series Lever Trim is for use on the 45-RIM and 45-SVR Exit Devices. The Lever Trim is non handed and ships with a 6-pin C Keyway Cylinder. The function is Classroom, which means the key will lock or unlock the lever. The lever also incorporates a clutch function so the mechanism will not break when excessive force is applied to the lever.

    ESC45-
    As low as $116.30
View as Grid List

Items 1-36 of 42

per page
Set Descending Direction
Page