Search results for: 'rollers for sizing door black'
- Did you mean
- roller for sizing door black 0
- rollers for spring door black 0
- Related search terms
- door series 30 push bar panic exit dor parts 1311
- door series 30 push bar panic exit dog parts 1308
- door series push bar panic exit dor cal parts 1308
- door series 30 pull bar panic exit dor parts 1310
- door series 30 push bar panic exit deep parts 1310
- door series 30 push bar panic exit detex parts 1307
- door series 30 push bar panic exit drop parts 1307
- door series 30 pull bar panic exit dead parts 1306
- door series 30 pull bar panic exit drop parts 1306
- dooramatic door series 30 push bar panic exit devic parts 1315
-
Anodized Black Aluminum Door Kick Plate 315AN
The Anodized Black Aluminum Door Kick Plate 315AN are a flat black and match the black color we find on Storefront doors. These plates have an aluminum base metal, which is 18 gauge (.040") thick that is then Anodized in the Black Color. These plates relatively inexpensive. Custom sizes are available, they run about $0.25 per square inch.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. This is fine on the Brass and Aluminum base metals, but again Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
GKP-BLK -
Black Anodized Aluminum Kick Plate-6 x 30 inches
The Black Anodized Aluminum Kick Plate-6 x 30 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP630BLK -
Black Anodized Aluminum Kick Plate-8 x 30 inches
The Black Anodized Aluminum Kick Plate-8 x 30 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP830BLK -
Black Anodized Aluminum Kick Plate-8 x 32 inches
The Black Anodized Aluminum Kick Plate-8 x 32 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP832BLK -
Black Anodized Aluminum Kick Plate-8 x 34 inches
The Black Anodized Aluminum Kick Plate-8 x 34 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP834BLK -
Black Anodized Aluminum Kick Plate-8 x 28 inches
The Black Anodized Aluminum Kick Plate-8 x 28 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP828BLK -
Black Anodized Aluminum Kick Plate-6 x 28 inches
The Black Anodized Aluminum Kick Plate-6 x 28 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP628BLK -
Black Anodized Aluminum Kick Plate-6 x 32 inches
The Black Anodized Aluminum Kick Plate-6 x 32 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP632BLK -
Black Anodized Aluminum Kick Plate-6 x 34 inches
The Black Anodized Aluminum Kick Plate-6 x 34 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP634BLK -
Handicap ADA Hands-Free Door Pull BM4511
The Handicap ADA Hands-Free Door Pull BM4511 is an ADA compliant. You can hook your forearm/wrist into the open end to open a non-latching door. The pull is constructed of stainless steel and is available in brushed stainless steel, powder coated flat black or powder coated dark bronze. The plate measures 4 x 16 inches and the grip is tack-welded to the plate and also has a 5/16-18 thread for thru bolting. The grip is 1-1/4 diameter by 8 inches. Ships with 6 mounting screws and one 5/16-18 thru bolt with finished washer in matching finish.
GBM4511- -
Hands-Free or Foot Door Pull BM46
The Hands-Free/Foot Door Pull BM46 can be used as a ADA compliant hands-free door pull when mounted 42" above the finished floor. Or as foot pull when mounted at the bottom of the door. The Pull is 4" x 5" and is made of .090 thick stainless steel. Ships with sex bolts and screws for 1-3/4" door. Available in Brushed Stainless Steel, Flat Black Powder Coat and Dark Bronze Powder Coat.
GBM46- -
Door Push Plate 50
The Door Push Plate 50 is the most common push plate we find out in industry today. It does not matter what type of commercial building you go into, you will find this style and thickness plate. The are offered in standard sizes, that are shown below, and can be made to custom sizes. The plates are 16 gauge metal (.050 thick) and are shipped with 4 beveled edges. The matching finiish screws are shipped with each plate.
3 x 12" GPH312
3.5 x 15" GPH315
4 x 16" GPH416
6 x 16" GPH616
4 x 20" GPH420
8 x 16" GPH816GPH50 -
Wall Door Holder/Stop 531
The Wall Door Holder/Stop 531 features cast brass or bronze finish which is then plated to the desired finish. This is considered a manually operated door holder, because it does not latch automatically. It features a 2-1/2" base with 3-5/8" projection, and ships complete with all of the needed fasteners.
GJ531- -
Floor Door Stop / Holder 536
Floor Door Stop / Holder 536
The Stop and Holder 536 is considered a manual door holder. It is a manual door holder because you have to physically bend over and hook and unhook the holder. This holder is constructed cast brass or cast bronze and then plated to your desired finish. The stop measures 2-1/2" in diameter and 3-7/8" overall height, with a center line height of 2-1/2" from the base to the center of the rubber stop. It ships with all of the fasteners.
GJ536- -
Floor Door Stop / Holder 534
Automatic Floor Type Holder and Stop
A replacement holder and stop that has been around for many years. This style of Holder can be found in many of the schools, churches and hospitals that were built in the 1960's and 1970's. Cast brass construction, and then chrome plated. Measures 3-11/16" high by 3" wide with a 1-15/16" projection. The strike is 1-3/16" high. Spring loaded brass roller, rolls over the the strike to lock the door in the open position. To release, just give the door a tug. Designed for doors with a door to floor clearance of less than a 1/2".
GJ534- -
Door Pull 25 3/4" Diameter
The Door Pull 25 is made of 3/4" round stock in either solid, Aluminum, Brass or Stainless Steel. The handle has a 2-3/8" projection from the door, and 1-5/8" clearance from the door to the back of the handle. It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Door Handle or Door Grip.
GHE25 -
Door Push Plate 70
The Door Push Plate 70 is our thickest plate we offer. The plate is 1/8" thick, and is aluminum, brass, stainless steel, or bronze depending on the finish. All 4 edges are beveled. We offer this plate in many sizes, and it ships with matching mounting screws.
GPH70- -
Door Pull Offset 3/4" Diameter 29
The Door Pull Offset 3/4" Diameter #29 is constructed of either solid, Aluminum, Brass or Stainless Steel. The handle 3/4" diameter tubing with a 2-1/2" projection and 2-1/2" offset. We find these on narrow stile aluminum framed glass storefront doors. It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Door Handle or Door Grip.
GHE29 -
Door Pull 26 1" Diameter
The Door Pull 26 is made of 1" round stock in either solid, aluminum, brass or stainless steel. The handle has a projection of 2-3/4", and clearance of 1-3/4". It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Door Handle or Door Grip.
8" GDP810
10" GDP101
12" GDP121GHE26 -
Plunger Type Door Holder / Stop 583
The Plunger Type Door Holder / Stop 583 is constructed of solid cast brass, that is then plated to the desired finish. It measures 5-3/8" by 2-1/4" base with a 1-1/4" projection. The throw is 1-1/4". These are sometimes called pop-up or push down stops. This piece will ship with matching finish mounting screws.
GJ583- -
Door Pull Handle 10
The Door Pull Handle 10 has 5-1/2" center to center screw spacing. The base is 3/4" diameter, the overall lenght is 6-1/4". The projection is 2" and the clearance is 1-1/2". Also known as a Door Handle or Door Grip. This handle ships with thru bolts and finish washers.
GHE10- -
Push Bar w/Handle 422X26
The Push Bar w/Handle 422X26 is usually found aluminum framed glass store front doors. It is constructed of 1" diameter solid aluminum, brass, bronze or stainless steel, depending on the finish. The handle or grip will have either a 8", 10", 12" or 18" center to center screw spacing. The push bar center to center length is determined by you, we can do any reasonable size. Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door. All the fasteners are included, and are determined by the material your door is made of (wood or metal). Please allow 3-4 weeks on the Dark Bronze and Aluminum, and 2 weeks on the other finishes.
422x26 -
Door Pull Offset 1" Diameter 39
The Door Pull Offset #39 Handle is constructed of either solid aluminum, brass or stainless steel. The handle is 1" diameter tubing with a 2-3/4" offset and 2-3/4" projection. This is the most common type of handle you use today. Just about every aluminum framed storefront door has a version of this handle. This handle is available in 8", 10", 12" and 18" centers on the mounting holes. If you have a 9" centered handle use the PH-4000. It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Offset Door Handle or Door Grip, and Storefront door handle.1" diameter material
GHE39 -
Push Bar W/Offset Grip 422X39
The Push Bar W/Offset Grip 422X39 is usually found aluminum framed glass store front doors. It is constructed of 1" diameter solid aluminum, brass, bronze or stainless steel, depending on the finish. The handle or grip will have either a 8", 10", 12" or 18" center to center screw spacing. The push bar center to center length is determined by you, we can do any reasonable size. Establish the center to center dimension by subtracting the width of one stile from the width of the door. On solid doors, subtract 5" from the width of the door. All the fasteners are included, and are determined by the material your door is made of (wood or metal). Please allow 3-4 weeks on the Dark Bronze and Aluminum, and 2 weeks on the other finishes.
422X39 -
Push Bar 1' Diameter 422
The Push Bar 1' Diameter 422 can be used on any door, but is usually found on aluminum framed glass store front doors. They are constructed of 1" diameter solid aluminum, stainless steel, bronze or brass depending on your select finish. The bar has a 2-1/8" projection and 1-1/8" clearance. The push bar ships with thru bolts and finish washer in matching finish. Please allow 4 weeks on Aluminum, Polished Brass, and Oil Rubbed Bronze. Stainless Steel and Polished Stainless Steel take about 2 weeks.
422 -
Door Push Plate 62
The Door Push Plate 62 is constructed of 16 guage (.050") thick aluminum, stainless steel, brass or bronze depending on your finish. They measure 7-1/2" by 15" tall. This plate is handed left and right, the one shown on the website is a Left Hand. Plate comes with matching finish mounting screws.
GPH62- -
Door Push Plate 61
The Door Push Plate 61 is constructed of 16 gauge stainless steel, aluminum, brass or bronze. This plate is handed left and right, the one shown on the website is a Left Hand plate. They measure 7-1/2" wide by 15" long, and ships with the matching finish mounting screws.
GPH61 -
Door Pull Plate 5010
The Door Pull Plate 5010 is .050" wought solid aluminum, stainless steel, or brass depending on the finish. The Door Pull GHE10, handles come with thru bolts. The plate has counter sunk holes and sheet metal screws in matching finish.
3" x 12" GPL312
3.5" x 15" GPL315
4" x 16" GPL416GPL10 -
Door Pull Plate 5026
The Door Pull Plate 5026 is a solid .050" wought plate of solid aluminum, brass or stainless steel depending on the finish. The Door Pull GHE26 has 8" centers and is constructed of solid aluminum, brass or stainless steel, and is 1" in diameter, handles come with thru bolts. The plate come predrilled with counter sunk holes and sheet metal screws in matching finiish.
GPL26BW- -
Door Push Plate 60
The Door Push Plate 60 has the classic half round design. The plate measure 8" wide and 16" tall, and is constructed of 16 gauge metal, which is .050" thick. This plate is similar to the GPH59 (Push Plate 59), but is a 1/2" wider and 1" taller. This plate ships with the matching finish screws.
GPH60-