Search results for: 'fixed door parts american device h 18'
-
Sargent Door Closer Hold Open Arm 25-H
The Sargent Door Closer Hold Open Arm 25-H is known as a Friction Hold Open Arm. As the arm rotates it tightens the two plates together until they can not turn any more, and holding the door open. To close you just pull the door and it will "unscrew". The hold open position is adjustable by tightening or loosening the larger nut.
Sargent part # 25-H
350HOA- -
Sargent 281 Door Closer
The Sargent 281 Door Closer is also known as the Powerglide, This closers meets ADA requirements, meets the Buy American Act, and is certified Grade 1, the heaviest rating possible. The closer has the capability to be mounted on the push, pull or top jamb, and is non handed. This closer is the replacement for the 1250 and 1251 series closers. This closer has been the replacement for the 1250 since about 2000. It is manufactured of an aluminum alloy.
Replaces the older Sargent 1250 and 1251 door closers, mounting holes will match
281- -
Sargent Door Closer 351
The Sargent Door Closer 351 is the most heavy duty closer made by Sargent. This closers meets ADA requirements, meets the Buy American Act, and is certified Grade 1, the heaviest rating possible. The closer has the capability to be mounted on the push, pull or top jamb, and is non handed. It ships with arm, plastic cover, parallel arm bracket and all of the fasteners. The hole spacing is 2-1/2" x 9"
350- -
Sargent Exit Device 80 Series Plastic End Cap And Bracket
Sargent Exit Device 80 Series Plastic End Cap And Bracket
includes the end cap, bracket and mounting screws. This plastic end cap always breaks. You might want to consider trying the new impact resistant end cap shown in the related products, on the right hand margin of the page.
Used on the Sargent 80 Series Exit Devices
Part #'s 68-0561, 68-0511 and 97-0052
G80300 -
Sargent Exit Device 20/30/60 End Cap And Bracket
The Sargent Exit Device 20/30/60 End Cap And Bracket is a part we put together here for your convenience. Sargent only sells these components separately. Usually only the cap goes missing, but every once and while the bracket goes missing also. The package is used on the all of the 20, 30 and obsolete 60 series devices.
Sargent Part # 68-0434, 68-2141, and 97-0052
G20300 -
Sargent 9898 Rim Panic Device
For Doors Wood or metal. 1 3/4" (44.5mm) thick standard. 2 1/4"(57mm) thick on order.
4 1/8" (105mm) miminum stile
Mounting Supplied standard with wood and machine screws.
Chassis Cover Brass, bronze or stainless steel
Chassis Nonferrous alloy
Crossbar 1" brass, bronze and stainless steel tubing.
Hand Reversible
Dogging Standard Allen key doggingG90EO- -
Sargent 8700 Panic Device
For Doors Wood or metal. 1-3/4" (44 mm) thick standard.
minimum stile with trim and 3-1/2"
Mounting Supplied standard with wood and machine screws
Chassis Cover Cold drawn brass, bronze or stainless steel
Chassis Nonferrous alloy
Hand Handed. Specify RHRB or LHRB
Dogging Feature Allen-type dogging furnished standard.
Top and Bottom Bolts Brass, stainless steel8700EO -
Sargent 2828 Series Rim Panic Device
Simplicity
• Engineered with minimum components and maintenance-free
• Modular design allows for phased component installation. Chassis assembly can be mounted separately to secure the door during construction
• Retrofits to all applications
• One chassis design to accept all available functions/trims
Durability
• Reinforced cast (ZA) alloy chassis – exceptional strength and durability. Withstands 2X more static load forces compared to a stamped steel chassis
• Endures over 4 times the ANSI/BHMA A156.3 2001 Grade 1 cycle testing standard
• Non-handed rim; reversible vertical rod
• Solid stainless steel latch. Meets UL panic test requirements without roller strikes which compromise strength and durability
• Three year warrantyG20EO- -
Sargent 2727 Panic Device
Simplicity
• Engineered with minimum components and maintenance-free
• Modular design allows for phased component installation. Chassis assembly can be mounted separately to secure the door during construction
• Retrofits to all applications
• One chassis design to accept all available functions/trims
Durability
• Reinforced cast (ZA) alloy chassis – exceptional strength and durability. Withstands 2X more static load forces compared to a stamped steel chassis
• Endures over 4 times the ANSI/BHMA A156.3 2001 Grade 1 cycle testing standard
• Non-handed rim; reversible vertical rod
• Solid stainless steel latch. Meets UL panic test requirements without roller strikes which compromise strength and durability
• Three year warranty2727EO- -
Sargent 20/30/60 End Cap Bracket
The Sargent 20/30/60 End Cap Bracket is used with the larger end cap. This end cap has been manufactured for the last 40 years and started its life on the obsolete 60 Series. The bracket holds the hinge side of the exit device on the door, and the G20300C fits over the top of it.
Sargent part #68-2141
G20300B -
Sargent 97-2434 Old Style 8700 Top Latch
Sargent 97-2434 Old Style 8700 Top Latch
The Sargent 97-2434 Old Style Top Latch was used on the 8706, 8710, 8713, 8715, 8728, 8740, 8743, 8746, 8762, 8763, 8773, and 8774 Series Surface Vertical Rod Devices before November 11, 2002. We sometimes fine the casting number of 97-0317 stamped on the back of this latch. This Top Chassis has 3 mounting holes.
Sargent Part # 97-2434
G972434 -
Sargent Door Closer 1331
The Sargent Door Closer 1331 is a standard template closer with the 3/4” x 12” hole spacing. This closer is a great replacement for the Norton 8000 Series or Yale 3000 Series Door Closers. The closer is constructed of a cast aluminum body and has a heat treated steel pinion and rack. The 1331 has the ability to be mounted on the push, pull or top jamb, and is non handed. We stock the aluminum finish, but also have the dark bronze finish, it just might take an extra day or so. We ship the 1331-JUO.
1330- -
Sargent Parallel Arm Bracket 125-P
The Sargent Parallel Arm Bracket 125-P is for use with the 25-O regular arm, to convert it to a parallel arm mount. A parallel arm mount is when the door closer is mounted on the push side of the door and the arm is parallel to the door when in the closed position.
Sargent part # 125-P9
350PAB- -
Sargent Door Closer 1431
The Sargent Door Closer 1431 is also known as the Powerglide. This closer meets ADA requirements and has a capability to be mounted on the push, pull or top jamb, and is non handed. This closer can be used as a direct replacement for the older version 1230 or 1231 Sargent Closers without having to re drill the mounting holes. This closer has been the replacement for the 1230 since about 2000. It is manufactured of an aluminum alloy.
Retrofits existing SARGENT 1230/1231 Series Closer installations
1430- -
Sargent 28-0109 Center Case Cam for 2828 / 2838
Sargent 2828 / 2838 Center Case Cam
The Sargent 2828 / 2838 Center Case Cam is the Cam that the key cylinder actuates to open the door. The Cam is located in the middle of the Center Case. We can no longer get the retaining ring to hold it in place.
Sargent Part # 28-0109
G280109 -
Sargent 700 ET Spindle Kit 730-7
Sargent 700 ET Spindle Kit 730-7
This Sargent Kit 730-7 includes the spring, spindle and the associated plates. Look under "More Views" for a detailed look of this repair kit. The 730-7 is for 1-3/4" doors. Shank measures 4-1/4" long, square spindle is 5/16" square.
Sargent Part # 730-7
G7307 -
Sargent 700 ET Retrofit Kit 730-1
Sargent 700 ET Spindle Kit 730-7
This Sargent Kit 730-7 includes the spring, spindle and the associated plates. Look under "More Views" for a detailed look of this repair kit. The 730-7 is for 1-3/4" doors. Shank measures 4-1/4" long, square spindle is 5/16" square.
Sargent Part # 730-7
G7301