Search results for: '4010 series two paint deadlatch with paddle'
-
Von Duprin ALK Alarm Kit
The Von Duprin ALK Alarm Kit converts the Von Duprin 22, 33A, 35A, 98 and 99 Devices to an alarmed exit device. When you exit the 85 decibel alarm will sound. Powered by a standard 9 volt battery and is controlled by a Mortise Cylinder with a straight cam. When battery is low, the alarm will beep.
Mortise Cylinder NOT included.
Von Duprin Part # 22-ALK, 33A-ALK, 35A-ALK, 98-ALK AND 99-ALK
ALK -
Von Duprin M996L Retrofit Kit
The Von Duprin 47273111 Converts the E996L to the new M996L. The difference between the two the later is a motorized version which is more robust and draws less current. The kit includes the M996 Motorized Module and Slider Assembly. They are offer two version one for the Rim (Rim), Surface Vertical Rod (SVR) and Concealed Vertical Rod (CVR) Exits, and one for the Mortise Lock Exits.
G47273111- -
Von Duprin 050534 EL Potted Circuit Breaker
The Von Duprin 050534 EL Potted Circuit Breaker measures 5" long by 1-1/4" wide and 7/16" thick including the wires. This piece spikes the current to the solenoid to open the door, then lowers the current to keep the device open. The 050534 has a plug for the two wire input, and a plug for the 3 wire output. This Potted Circuit Breaker is also used on the Doromatic/Falcon Exit Devices, EL1490, EL1590, EL1690, EL1790, and EL2390. We sometimes find the number 101031-00 and 2148 on a sticker.
Old Von Duprin Part # 110741
Von Duprin Part # 050534
Doromatic/Falcon Part # 050534-00G050534 -
Von Duprin 050814 Solenoid Kit for E996
The Von Duprin 050671 and 050814 solenoid have been discontinued. All of our stock is gone. Von Duprin has come out with a retrofit kit to update your E996 Lever to the M996 Lever. The kit changes out the solenoid for a mortorized version, more robust and uses less current. The newer version can be found by searching for M996.
This solenoid is used on the E996 Electrified Lever Trim. The Solenoid body measures 1-3/8” x 9/16” diameter, mounting bracket has a 3/4” on center hole spacing. The wiring harness has a two wire plug. We some times fine the number 991342 on the solenoid.
New for 2024 Von Duprin has come up with a Mechanical Electrified Conversion kit. This kit converts the EL Solenoid to a Mechanical Electrified Trim. More information can be found @ https://www.robertbrooke.com/von-duprin-m996l-retrofit-kit.html
Von Duprin Part # 050814
Von Duprin Part # 050671G050814