Search results for: 'latches+kick+for+bathroom+door'
- Did you mean
- latch kick for bathroom door 0
- Related search terms
- latches+kick+for+bathroom+doors 1049
-
Oil Rubbed Bronze Door Kick Plate
Our Dark Bronze Oil Rubbed Bronze Door Kick Plates (US10B) are a baked on powder coat on brass base metal. We switched to this finish 5 years ago due to color variations in the US10B Oil Rubbed Bronze finishes. The US version was much lighter than the Asian version, which is where most the door hardware is made these days. The cost of Oil Rubbing was going through the roof and many platers were having issue with the environmental impact and EPA regulations in the United States. Our Oil Rubbed Kick Plates are 16 gauge (.050″) thick.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut dark brown screw. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates, it is not recommended. Large plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and some C Clamps with the door on saw horses.
Custom sizes available starting around $0.49 per square inch depending quantity
Please allow 2 week shipping time
GKP-DB -
Lifetime Polished Brass Door Kick Plate-Lifetime Brass-6 x 28 inches
The Lifetime Polished Brass Door Kick Plate 6 x 28 inches has a 16 gauge (.050" thick) base metal, that is then plated with a artificial brass finish that is then polished. The process is called Poly Vapor Deposition or PVD, which is why we hear the name Lifetime Polished Brass Kick Plate PVD. Because the finish is an artificial brass, it does not have to be clear coated, so it will never tarnish. The Lifetime Polished Brass finish cost the same as the Solid Brass Polished Kick Plates. Custom sizes are available starting around $0.23 per square inch depending quantity. Kick Plate comes with screws for mounting. Please allow 1 week shipping time.
GKP628PVD -
Lifetime Polished Brass Door Kick Plate-Lifetime Brass-10 x 34 inches
The Lifetime Polished Brass Door Kick Plate 10 x 34 inches has a 16 gauge (.050" thick) base metal, that is then plated with a artificial brass finish that is then polished. The process is called Poly Vapor Deposition or PVD, which is why we hear the name Lifetime Polished Brass Kick Plate PVD. Because the finish is an artificial brass, it does not have to be clear coated, so it will never tarnish. The Lifetime Polished Brass finish cost the same as the Solid Brass Polished Kick Plates. Custom sizes are available starting around $0.23 per square inch depending quantity. Kick Plate comes with screws for mounting. Please allow 1 week shipping time.
GKP1034PVD -
Anodized Aluminum Door Kick Plate-10 x 28 inches
The Anodized Aluminum Door Kick Plate-10 x 28 inches are the most cost effective, least expensive. The aluminum plates are 16 gauge, or .050" thick. They have an anodized finish to resist corrosion and we find these in many commercial buildings through out the United States.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.07 per square inch.
GKP1028 -
Anodized Aluminum Door Kick Plate-34 x 34 inches
The Anodized Aluminum Door Kick Plate-34 x 34 inches are the most cost effective, least expensive. The aluminum plates are 16 gauge, or .050" thick. They have an anodized finish to resist corrosion and we find these in many commercial buildings through out the United States.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.07 per square inch.
GKP3434 -
Satin NIckel Door Kick Plate : 6" x 32" Satin Nickel
Satin Nickel Door Kick Plate : 6" x 32" Satin Nickel
The Satin Nickel is a popular finish we have been seeing the last 15 years. The Satin Nickel Door Kick Plates are a solid brass plate that is Nickel Plated and then brushed to give it the Satin or Brushed look. These plates are 16 gauge or .050″ thick.Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″. You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses. Custom sizes available starting around $0.28 per square inch depending quantity . Please allow 1 week shipping time.
GKP632sn -
Brushed Brass Door Kick Plate-8 x 30 inches
Brushed Brass Kick Plate US4 -16 Ga (.050")
Solid brass plate with brushed finish, then clear coated
Custom sizes available starting around $0.25 per square inch depending quantityKick Plate comes with screws for mounting
Please allow 1 week shipping time
GKP830-US4 -
Gold Aluminum Door Kick Plate
The Gold Aluminum Door Kick Plate are constructed of .040" thick aluminum base material that is then anodized to a polished brass finish. These plates are a great alternative to the Solid Polished Brass and Lifetime Brass kick plates. Custom sizes are available, they run about $0.24 per square inch or less. Ships with matching Phillips type sheet metal screws.. Please allow 7-10 days for delivery
.GKP-Gold Aluminum -
Brushed Stainless Steel Door Kick Plate 16 Gauge .050 : 6" x 34"
The Brushed Stainless Steel Door Kick Plate 6 x 34” 16 Gauge .050 is the most popular. Stainless steel offers one of the best material for commercial applications. They are very hard, and do not dent easily. The also offer the best corrosion resistances out there.
Stainless Steel Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.14 per square inch depending quantity
Please allow 1 week shipping timeGKP634ss16 -
Brushed Stainless Steel Door Kick Plate 16 Gauge .050 : 8" x 28"
The Brushed Stainless Steel Door Kick Plate 8 x 28” 16 Gauge .050 is the most popular. Stainless steel offers one of the best material for commercial applications. They are very hard, and do not dent easily. The also offer the best corrosion resistances out there.
Stainless Steel Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.14 per square inch depending quantity
Please allow 1 week shipping timeGKP828ss16 -
Brushed Stainless Steel Door Kick Plate 16 Gauge .050 : 6" x 30"
The Brushed Stainless Steel Door Kick Plate 6 x 30” 16 Gauge .050 is the most popular. Stainless steel offers one of the best material for commercial applications. They are very hard, and do not dent easily. The also offer the best corrosion resistances out there.
Stainless Steel Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.14 per square inch depending quantity
Please allow 1 week shipping timeGKP630ss16 -
Anodized Aluminum Door Kick Plate
Anodized Aluminum Door Kick Plates are the most cost effective, least expensive. The aluminum plates are 16 gauge, or .050″ thick and have a brushed or satin finish. They have an anodized finish to resist corrosion and we find these in many commercial buildings through out the United States.
Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″. You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.21 per square inch depending quantity
Please allow 1 week shipping time
GKP-al -
Von Duprin 8827 Top Latch Case 050460
The Von Duprin 8827 Top Latch Case 050460 is for non fire rated doors. A non fire rated device is one that has to positively latch every time it closes, you can usually tell, because a non fire rated device has the hex key dogging. This is the part that may be causing your bottom latch to drag on the floor. The Top Latch does all the work on the Von Duprin 8827. When the Top Latch is retracted, it holds the rods in the retracted position.
Von Duprin part # 050460
Old Part # 10175088VR10 -
Brushed Bronze Door Kick Plate
The Brushed Bronze Door Kick Plates are solid bronze plates that are finished in a Satin or Brushed finish and then clear coated. The Bronze Kick Plates are similar to the Brass Kick Plates, but they have more of an orange hue, were as the brass plates have a yellow hue. This was a very popular finish in the 1950's, 60's and early 70's. Custom sizes are available starting around $0.49 per square inch depending quantity. Kick Plates come pre drilled with screws. Please allow 2 week shipping time.
GKP-US10 -
4" Kickdown Door Holder FS452
4" Kickdown Door Holder FS452
The H.B. Ives FS452 is another classic kick down door stop. It features a simple hold and release, activated with a touch of the foot, and is constructed of cast bronze or brass depending on the finish you are ordering. A simple stainless steel spring clip holds the stop in the up position. The non-marring rubber shoe is replaceable, and they have a corrugated bottom to prevent sliding on the floor and a secure grip. This stop is shipped with matching finish sheet metal screws. The 4" model is for door to floor clearances of 2" or less. The hole spacing is 19/32" x 1-47/64".
Ives Part # FS452
GJ452-4- -
Von Duprin 8827-F Bottom Latch Kit 050463
Von Duprin 8827-F Bottom Latch Kit 050463 is the Bottom Latch Kit for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted position.
Von Duprin Part # 050463
Old Part # 10268188VR170F -
Lifetime Polished Brass Door Kick Plate-Lifetime Brass-8 x 30 inches
The Lifetime Polished Brass Door Kick Plate 8 x 30 inches has a 16 gauge (.050" thick) base metal, that is then plated with a artificial brass finish that is then polished. The process is called Poly Vapor Deposition or PVD, which is why we hear the name Lifetime Polished Brass Kick Plate PVD. Because the finish is an artificial brass, it does not have to be clear coated, so it will never tarnish. The Lifetime Polished Brass finish cost the same as the Solid Brass Polished Kick Plates. Custom sizes are available starting around $0.23 per square inch depending quantity. Kick Plate comes with screws for mounting. Please allow 1 week shipping time.
GKP830PVD -
Lifetime Polished Brass Door Kick Plate-Lifetime Brass-8 x 34 inches
The Lifetime Polished Brass Door Kick Plate 8 x 34 inches has a 16 gauge (.050" thick) base metal, that is then plated with a artificial brass finish that is then polished. The process is called Poly Vapor Deposition or PVD, which is why we hear the name Lifetime Polished Brass Kick Plate PVD. Because the finish is an artificial brass, it does not have to be clear coated, so it will never tarnish. The Lifetime Polished Brass finish cost the same as the Solid Brass Polished Kick Plates. Custom sizes are available starting around $0.23 per square inch depending quantity. Kick Plate comes with screws for mounting. Please allow 1 week shipping time.
GKP834PVD -
Brushed Stainless Steel Door Kick Plate 16 Gauge .050-10- x 34 inches
The Brushed Stainless Steel Door Kick Plate 10 x 34” 16 Gauge .050 is the most popular. Stainless steel offers one of the best material for commercial applications. They are very hard, and do not dent easily. The also offer the best corrosion resistances out there.
Stainless Steel Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.14 per square inch depending quantity
Please allow 1 week shipping timeGKP1034ss16 -
Lifetime Polished Brass Door Kick Plate-Lifetime Brass-6 x 32 inches
The Lifetime Polished Brass Door Kick Plate 6 x 32 inches has a 16 gauge (.050" thick) base metal, that is then plated with a artificial brass finish that is then polished. The process is called Poly Vapor Deposition or PVD, which is why we hear the name Lifetime Polished Brass Kick Plate PVD. Because the finish is an artificial brass, it does not have to be clear coated, so it will never tarnish. The Lifetime Polished Brass finish cost the same as the Solid Brass Polished Kick Plates. Custom sizes are available starting around $0.23 per square inch depending quantity. Kick Plate comes with screws for mounting. Please allow 1 week shipping time.
GKP632PVD -
Lifetime Polished Brass Door Kick Plate-Lifetime Brass-8 x 28 inches
The Lifetime Polished Brass Door Kick Plate 8 x 28 inches has a 16 gauge (.050" thick) base metal, that is then plated with a artificial brass finish that is then polished. The process is called Poly Vapor Deposition or PVD, which is why we hear the name Lifetime Polished Brass Kick Plate PVD. Because the finish is an artificial brass, it does not have to be clear coated, so it will never tarnish. The Lifetime Polished Brass finish cost the same as the Solid Brass Polished Kick Plates. Custom sizes are available starting around $0.23 per square inch depending quantity. Kick Plate comes with screws for mounting. Please allow 1 week shipping time.
GKP828PVD -
Door Silencers For Wood Doors
Door Silencers For Wood Doors
For use on Wood Doors. Insert into 1/4" hole in door frame.
Height: 3/4"
Diameter: 3/8"
Thickness: 1/8"GJ65 -
Duranodic Aluminum (Dark Brown) Door Kick Plate-6 x 32 inches
The Duranodic Aluminum (Dark Brown) Door Kick Plate-6 x 32 inches are 18 gauge (.040”) thick. The finish is a brushed (flat) storefront dark brown color, which is also known as 313AN. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP632DB -
Duranodic Aluminum (Dark Brown) Door Kick Plate-8 x 30 inches
The Duranodic Aluminum (Dark Brown) Door Kick Plate-8 x 30 inches are 18 gauge (.040”) thick. The finish is a brushed (flat) storefront dark brown color, which is also known as 313AN. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP830DB -
Anodized Aluminum Door Kick Plate-10 x 30 inches
The Anodized Aluminum Door Kick Plate-10 x 30 inches are the most cost effective, least expensive. The aluminum plates are 16 gauge, or .050" thick. They have an anodized finish to resist corrosion and we find these in many commercial buildings through out the United States.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.07 per square inch.
GKP1030 -
Anodized Aluminum Door Kick Plate-10 x 32 inches
The Anodized Aluminum Door Kick Plate-10 x 32 inches are the most cost effective, least expensive. The aluminum plates are 16 gauge, or .050" thick. They have an anodized finish to resist corrosion and we find these in many commercial buildings through out the United States.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.07 per square inch.
GKP1032 -
Anodized Aluminum Door Kick Plate-10- x 34 inches
The Anodized Aluminum Door Kick Plate-10- x 34 inches are the most cost effective, least expensive. The aluminum plates are 16 gauge, or .050" thick. They have an anodized finish to resist corrosion and we find these in many commercial buildings through out the United States.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.07 per square inch.
GKP1034 -
Brushed Brass Door Kick Plate-6 x 32 inches
Brushed Brass Kick Plate US4 -16 Ga (.050")
Solid brass plate with brushed finish, then clear coated
Custom sizes available starting around $0.25 per square inch depending quantityKick Plate comes with screws for mounting
Please allow 1 week shipping time
GKP632-US4 -
Brushed Brass Door Kick Plate-8 x 28 inches
Brushed Brass Kick Plate US4 -16 Ga (.050")
Solid brass plate with brushed finish, then clear coated
Custom sizes available starting around $0.25 per square inch depending quantityKick Plate comes with screws for mounting
Please allow 1 week shipping time
GKP828-US4 -
Polished Stainless Steel Door Kick Plate : 6" x 32"
Our Polished Stainless Steel Door Kick Plate : 6" x 32" are made of solid 16 gauge (0.050” thick) stainless steel. The plates are then polished to a mirror finish on one side. They are then beveled on all 4 edges.
We often have people looking for Brushed Chrome or Polished Chrome, but the appearance of the two finishes next to each other is very difficult to tell which is which. Also a brushed chrome or polished chrome kick plate would be a brass plate which is then chrome plated and brushed or polished depending on the plate. Brass is a soft metal that dents easily, and also does not offer the corrosion resistance that stainless steel does. Since stainless steel is stable in any environment, they do not have to clear coat the plate.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Two way tape is not recommended for the larger plates, because they are just too heavy. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut stainless steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.20 per square inch.
GKP632pss -
Polished Stainless Steel Door Kick Plate : 8" x 28"
Our Polished Stainless Steel Door Kick Plate : 8" x 28" are made of solid 16 gauge (0.050” thick) stainless steel. The plates are then polished to a mirror finish on one side. They are then beveled on all 4 edges.
We often have people looking for Brushed Chrome or Polished Chrome, but the appearance of the two finishes next to each other is very difficult to tell which is which. Also a brushed chrome or polished chrome kick plate would be a brass plate which is then chrome plated and brushed or polished depending on the plate. Brass is a soft metal that dents easily, and also does not offer the corrosion resistance that stainless steel does. Since stainless steel is stable in any environment, they do not have to clear coat the plate.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Two way tape is not recommended for the larger plates, because they are just too heavy. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut stainless steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.20 per square inch.
GKP828pss -
Polished Stainless Steel Door Kick Plate : 6" x 30"
Our Polished Stainless Steel Door Kick Plate : 6" x 30" are made of solid 16 gauge (0.050” thick) stainless steel. The plates are then polished to a mirror finish on one side. They are then beveled on all 4 edges.
We often have people looking for Brushed Chrome or Polished Chrome, but the appearance of the two finishes next to each other is very difficult to tell which is which. Also a brushed chrome or polished chrome kick plate would be a brass plate which is then chrome plated and brushed or polished depending on the plate. Brass is a soft metal that dents easily, and also does not offer the corrosion resistance that stainless steel does. Since stainless steel is stable in any environment, they do not have to clear coat the plate.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Two way tape is not recommended for the larger plates, because they are just too heavy. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut stainless steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.20 per square inch.
GKP630pss -
Satin NIckel Door Kick Plate: 8" x 30" Satin Nickel
Satin Nickel Door Kick Plate: 8" x 30" Satin Nickel
The Satin Nickel is a popular finish we have been seeing the last 15 years. The Satin Nickel Door Kick Plates are a solid brass plate that is Nickel Plated and then brushed to give it the Satin or Brushed look. These plates are 16 gauge or .050″ thick.Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″. You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses. Custom sizes available starting around $0.28 per square inch depending quantity . Please allow 1 week shipping time.
GKP830sn