Door Closers
At RBA Door, we offer a wide range of high quality door closers, assemblies and accessories. Our door closers and door closing accessories are perfect for “high-traffic” commercial uses in schools, universities, churches, YMCA, offices, business, warehouses and exhibit halls. We also feature low-power door closers perfect for those with limited mobility. Our products are the ideal solution to maintain a first point of building security and to reduce energy consumption in climate controlled areas..
-
Sargent Regular Arm 25-O
The Sargent Regular Arm 25-O is now used on all of there commercial grade closers. This is the standard arm shipped with about 90 percent of there closers. This arm is for use with the 350, 1430, and 281 closers, and will work on the 1230 and 1250 models also.
Sargent Part # 25-0
350RA- -
International 8600 Series End Cap
The International 8600 Series End Cap is used on the hinge side of the the exit device. This cap includes the mounting bracket and the mounting screws. It is constructed of a die cast metal for years of service. The piece measures 2-3/8" by 2-1/4" by 1-1/2". This end cap is used on the International Door Closer models, 8510S, 8610S, 8710S, 8810S, 8620S, 8530S, and 8650S devices, along with the same devices ending in F.
INT8600EC- -
LCN 159 Arm Screw
The LCN 159 Arm Screw is used on all of the LCN Closers to hold the arm on the Spindle of the Cylinder. This screw goes by the number 4040-159, 4110-159, 4020-159, 1260-159, 1260-159, 4040-159 and 4040SE-159. This is the screw that holds the arm on to the Door Closer Spindle (Shaft). The screw has a 3/4" diameter head, 1/2" high with a 1/4" diameter shaft with 20 threads per inch (1/4-20 screw).
4040SE-159 -
LCN 1370 Quick Fix Plate
The LCN 1370 was a door closer made in the late 1990's to 2006 or so. The closer had a special mounting plate that made installation very quick. Many people have this door closer in use and now they are starting to fail. The LCN 1370-18QF Quick Fix Plate converts the mounting holes of the 1370 to a standard template closer, which is 3/4" x 9-1/16". By using this plate you will not have to redrill holes in your door. The plate measures 2 by 10-1/4 inches with tapped holes that measure 3/4 x 9-1/16 inch.
1260-18QF- -
LCN Sentronic Door Closer Arm - 4110SE-3077T
LCN Sentronic Door Closer Arm - 4110SE-3077T
LCN part # 4110SE-3077T
This arm will only work on the 4110SE. If you have another LCN Sentronic Model, we can order the arm you need. For us to do that we would need to know which model you have (4110SE, 4010SE, ect..) and the hand of the door, see diagram
4110SE-3077T -
LCN 18PA Drop Plate for Parallel Arm Mounting
LCN Drop Plate for Parallel Arm Mounting
The 18PA LCN Drop Plates are designed to lower the mounting holes on doors with glass at the top of the door. If your door has a narrow stile at the top of it surrounded by a metal frame, mount the door closer on this plate.
LCN Part #'s
1260-18PA
1460-18PA
4040-18PA
4040XP-18PA
4110-18PA18PA-- -
LCN Sentronic Door Closer Arm - 4010SE-3077T
LCN Sentronic Door Closer Arm - 4010SE-3077T
LCN part # 4010SE-3077T
This arm will only work on the 4010SE. If you have another LCN Sentronic Model, we can order the arm you need. For us to do that we would need to know which model you have (4110SE, 4010SE, ect..) and the hand of the door, see diagram. This arm is for a discontinued LCN Door Closer. We can not allow returns, each arm is specail ordered.
4010SE-3077T -
LCN 4040SE-3077T Sentronic Door Closer Arm
The LCN 4040SE-3077T Sentronic Door Closer Arm is only for use with the 4040SE. If you have another LCN Sentronic Model, we can special order the arm you need. For us to do that we would need to know which model you have (4110SE, 4010SE, ect..) and the hand of the door.
LCN Part # 4040SE-3077T
4040SE-3077T- -
Falcon Dor-o-Matic 3049DS Dead Stop Hold Open Arm
The Falcon Dor-o-Matic 3049DS Dead Stop Hold Open Arm is used on their SC60, SC70 and SC80 Door closers only. This arm is non-hnaded, stamped, heavy duty, hold-opn parallel arm includes a positive mechanical stop and non-adjustable forearm assembly for high volume traffic and harsh conditions.
3049DS