Panic Hardware
Our company RBA Door is a top distributor of panic devices (also known as exit devices) and panic hardware from leading name brands in the door security industry. Applying security systems and alarm systems to doors that can be found in schools, offices, businesses and in other buildings has become a vital criterion to overall building visitor safety. We entered into the panic hardware industry in the hopes of providing consumers with panic devices and exit device hardware to potentially add to the safety of establishments around the world.
We sell brand new panic devices that can be freshly installed on doors in all sorts of buildings with visitors that constantly come and go. The panic hardware that we supply is more for replacing old, falling apart hardware on your panic devices that have already been installed for a while.
The panic/exit devices in our selection range from surface vertical rod devices to concealed vertical rod devices, from rim exit devices to battery operated alarm systems. Our replacement panic hardware consists of trims, rim cylinders, electric strikes, end caps and more.
Shipping And Handling For Panic Devices
Read our online product descriptions for the panic devices and the panic hardware that we distribute. There you will find the shipping details for the product you clicked on.
Product shipping times vary. If the Lead Time is In Stock, then the panic devices and panic hardware you are ordering will ship straight to you from our warehouse with no delay. If the Lead Time is a day, a week or more, then we will have to order your panic devices from the manufacturer's factory and they will ship from there.
Panic Devices Manufacturers
Below is a list of panic devices brands that we have available in our selection for you to order online. We have panic devices and panic hardware from at least 14 top-rated door security brands. Click on one of the brands listed below for a brief overview of each manufacturer’s company background and an overview of their products.
- Adams Rite
- American Device
- Cal-Royal
- Corbin Russwin
- Detex
- Dor-O-Matic
- HES
- International Door Closer
- Ives
- Jackson Exit Device
- Monarch Exit Devices
- Sargent
- Von Duprin Exit Devices
- Yale
Commercial Door Panic Devices
What kind of panic/exit devices do you want installed in your building? We sell several styles of panic/exit devices from reputable panic devices brands. If you already have something in mind, you can do a quick search to see whether we carry the panic/exit devices you are searching for. If not, review the panic devices that we offer so that you can reach a conclusion about which style you will need to use for your doors.
The panic devices brands we sell from manufacture surface vertical rod exit devices, concealed vertical rod exit devices, rim exit devices, crossbar exit devices, touch bar exit devices, push bar panic exit devices, battery powered panic alarm systems and heavy-duty exit devices that you can order from our website. Many of these panic devices come with different color, finish and size options, so take your pick.
The panic devices you order from our web store can work on either single doors or double doors, so be sure to note which style you will need for your door project before placing your order. Also check to see whether the commercial door exit devices are left handed, right handed or non handed.
Plus, check the product description and make a mental note of what type of doors the device can be used on. Some panic devices can be used on glass doors, narrow stile doors, aluminum hollow metal doors and more. This will be important information to keep in mind when ordering your panic alarm systems for schools, offices or another organization.
Panic Hardware
While we offer numerous styles of panic device for doors in commercial buildings, we also sell replacement exit device hardware if you ever need to replace a part on panic devices or panic alarm systems. We sell panic hardware for glass doors, panic hardware for single doors and double doors, and even panic hardware for some discontinued panic devices. What type of panic hardware you should order will depend entirely on which panic devices are installed on the building doors.
We have more than just trims, strikes, levers, end caps, dogging assemblies, latch covers, brackets and springs in our selection of panic hardware from popular name brands in the industry. Whether you need panic hardware for rim exit devices, panic hardware for glass doors or panic hardware for another reason, we have the perfect replacement parts for you. Order your panic hardware today to receive your parts as soon as possible and get started on making crucial repairs to your panic exit devices.
Order Details For Panic Exit Devices
Make your purchase of panic exit devices and panic hardware through our web store today. We have plenty of exit devices and panic parts that are available to be shipped to you immediately. Before you pay, we want to make sure that all of your questions are answered.
Send us your questions regarding your panic exit devices order before you check out and we will provide you with helpful answers at our earliest convenience. Give us a call or send us an email so that we can properly assist you with your online panic exit devices order.
-
Dor-o-Matic 1690/1790/2390 Dogging Spring PB323
Dor-o-Matic 1690, 1790 and 2390 Dogging Spring
Doromatic part # 971493-76 or PB323
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts Breakdown
Falcon / Dor-o-Matic 2390 Parts Break DownGPB323 -
Dor-O-Matic 1690/1790/2390 Dogging Assembly PBX-16
Dor-O-Matic 1690/1790/2390 Dogging Assembly PBX-16
Falcon Doromatic 1690, 1790, and 2390 replacement dogging assy. The dogging assembly is used to dog the door in the open position, so people can enter the building without having to unlatch the door for the inside or with a key on the outside. The KIT.1197 comes complete with mounting screws. Some of the earlier version where riveted into the rail, so you might need to drill out the rivets, the screws shipped with KIT.1197 have self tapping thread forming screws.
Doromatic part # KIT.1197
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts Breakdown
Falcon / Dor-o-Matic 2390 Parts Break DownGPBX16 -
Dor-O-Matic 1690/1790/2390 Dogging Hex Shaft
The Dor-O-Matic 1690/1790/2390 Dogging Hex Shaft is the piece that your dog key (allen wrench) fits into the lock the device in the open or dogged position. This shaft is used on the 1690, 1790, and 2390 device. The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008. They are basically the same device, with the same parts, just a different name plate. The part that the hex key fits into is only about 1/4" deep, because of that these tend to get rounded out, so the key will not move the shaft.
To remove the old shaft just pull with a pair of Channel Locks or Pliers. To reinstall, just press it back in to position, you might have to bend the holding tabs back down, but we very rarely have to do this. The manufacture part number on this is SHAFT.101.
GPBX16-SHF -
Dor-o-Matic 1690/1990 Top Strike Shim Package-SHIM.112
Doromatic PB48 Strike Shim Package Of 10 Pieces
This Dor-o-Matic product is for the PB48 Top Strike. This is the shim that goes under the top strike. The plate measures 1" x 1-1/16" with 4 holes. The mounting holes are 11/16" x 11/16" on center. They are only sold in packages of 10.
Doromatic Part # SHIM.112
G199034-SHIM -
Dor-o-Matic 2390 Lift Bracket BRKT.143 PB336
Doromatic 2390 Lift Bracket
This cadium plated bracket attaches to the concealed vertical rods. When the push bar is depress, it raises and lowers the brackets and the rods. The bracket measures 2-7/8" long by 5/8" wide and has an overall projection of 3/4"
Falcon / Doromatic Part # BRKT.143
GPB336 -
Doromatic 2390 Moving Pushbar End Cap PB342 ECAP.143
Doromatic 2390 Moving Pushbar End Cap
Doromatic 2390 Moving Pushbar End Cap is the piece that fits on the end of the pushbar. The Endcap is 3-3/8" high by 1/4" thick, with an 1-7/8" projection. The Pushbar End Cap is constructed of die cast metal that is painted black.
Doromatic / Falcon Part # PB342 or ECAP.143
GPB342 -
Corbin Russwin 651F61 Red Lever Spring
The Corbin Russwin 651F61 Red Lever Spring is the same part as the Yale Lever Trim Spring. Used on Yale and Corbin Russwin LHR or RH Doors on there outside trim Lever Handles. The spring has an 1-1/4" OD and 1-1/8" ID.
Yale Part # 60-7000-1225-999
Corbin Russwin # 651F61
G651F61 -
Jackson Panic Device 1085 and 1095 Thumb Piece Dogging Pin 30-1117
The Jackson Panic Device 1085 and 1095 Thumb Piece Dogging Pin 30-1117 is a replacement for the Screw Driver Headed Dogging Pin. Now instead of using a screw driver you can use the handy thumb piece instead. The package comes with new set screw, spring, and of course the pin. Jackson part number 30-1117.
G108554TP -
Jackson Panic Device 1295 Push Pad End Cap Package
Jackson Panic Device 1295 Push Pad End Cap Package
Package includes two end caps, one bracket mounting screw, and 4 end mounting screws. This product was just upgraded to a metal cover, which will replace the old plastic cover.
Old Jackson part # 30-2677
New Jackson Part # 30-2654G302677-xx -
Jackson Panic Device 1285 Push Pad End Cap Package
Jackson Panic Device 1285 Push Pad End Cap Package
Package includes two end caps, one bracket mounting screw, and 4 end mounting screws. This product was just upgraded to a metal cover, which will replace the old plastic cover.
Old Jackson part # 30-2661
New Jackson Part # 30-2652-628 or 30-2652-313G302661- -
Jackson 30-2674 1285/1295 Cover Package
Jackson 30-2674 1285/1295 Cover Package
Jackson part # 30-2674-313 and 30-2674-628 Cover Plate for use on the 1285 and 1295 devices.. Plates measure 2-11/16" x 7-1/2 and 2-11/16" x 2-1/8", two plates in each package.
Jackson Part #'s 30-2674-313 and 30-2674-612
G302674- -
Monarch 19 Series Chassis Assembly Cover
Monarch 19 Series Chassis Assembly Cover
This is the cover for the Monarch Falcon 19-R Rim Device. The cover measures 5-7/8" tall by 2-1/2" wide with a projection of 1-7/8". We sometimes find the number 6133 - 000 cast into the inside of the cover.
Monarch/Falcon part # 650384
Old Part # 6133G19R20 -
Monarch 19 Series End Cap Bracket
Monarch 19 Series End Cap Bracket
This steel bracket holds the hinge side of the panic bar on the door. The end cap then fits over it for a finished look. Bracket measures 1-5/8" tall by 1-1/4" wide with a 15/16" projection. Sometimes shipped with a mounting barrel nuts and screw.
Monarch Falcon Part # 650320 or old part # 600108
G19R100B -
Falcon 650387 Bottom Bolt Guide Assembly
Falcon 650387 Bottom Bolt Guide Assembly
The Falcon Monarch Bottom Bolt Guide Assembly 650387 is used the 19-V, 24-V, 25-V and the XX-V Bottom Rod. The Guide Assembly measures 1-7/8" tall by 1" wide and projects 1-9/16" at the widest projection. The Bottom Bolt Guide is made of zinc plated steel.
Falcon Monrarch Part # 650387
G650387 -
Monarch Lever Trim Spring 4841
Monarch Trim Spring 4841
2-1/2" long x 3/16" diameter
Monarch part # 4841
G4841 -
Sargent Lever Return Spring 97-0425
The Sargent Lever Return Spring 97-0425 is usually a green color, however we have seen them in blue and red. The red spring has the same dimensions as the green, but the loop on the coil side of the spring was closed. Sargent is using this spring as a replacement for all of those springs. If you have a Sargent Panic Hardware, and the lever is sagging, or just hanging, this is most likely the problem. The spring measures 2-1/8" long by roughly 3/8" diameter.
Sargent part # 97-0425
G970425 -
Sargent Exit Device 20/30/60 End Cap And Bracket
The Sargent Exit Device 20/30/60 End Cap And Bracket is a part we put together here for your convenience. Sargent only sells these components separately. Usually only the cap goes missing, but every once and while the bracket goes missing also. The package is used on the all of the 20, 30 and obsolete 60 series devices.
Sargent Part # 68-0434, 68-2141, and 97-0052
G20300 -
Sargent 20/30/60 End Cap Bracket
The Sargent 20/30/60 End Cap Bracket is used with the larger end cap. This end cap has been manufactured for the last 40 years and started its life on the obsolete 60 Series. The bracket holds the hinge side of the exit device on the door, and the G20300C fits over the top of it.
Sargent part #68-2141
G20300B -
Sargent Exit Device 80 Series Plastic End Cap And Bracket
Sargent Exit Device 80 Series Plastic End Cap And Bracket
includes the end cap, bracket and mounting screws. This plastic end cap always breaks. You might want to consider trying the new impact resistant end cap shown in the related products, on the right hand margin of the page.
Used on the Sargent 80 Series Exit Devices
Part #'s 68-0561, 68-0511 and 97-0052
G80300
