Panic Bars | Cal-Royal | Dark Bronze
RBA Door sells panic bars, parts and accessories from a wide variety of manufacturers. We only sell products that were made by respected brand names in the panic bar doors industry. As a leading supplier of panic exit devices and hardware, you can count on the quality of the exit bars that we distribute to consumers anywhere in the United States and Canada.
With over 55 years of experience with panic bars and panic devices, we can answer any questions you might have about your device. Just call us or email us and we will be with you shortly.
We Distribute Panic Bars Online
If you are working on maintenance for a building, then you may have come across some building codes that you must abide by for safety purposes. In some establishments, these building codes that are in place often include sections that require panic bars for exit doors to be installed. Whether a requirement or not, having exit bars installed on the single doors or double doors in a building can be a guaranteed safety solution.
We have about two pages of panic bars from top manufacturers to choose from. We carry panic bars with alarms, vertical rod panic bars, rim panic bars, panic bars with locks, panic bars for double doors, panic bars for single doors, panic bars for glass doors and more. Browse through our selection to gather some information before completing your purchase.
Panic Bar With Lock
Many exit bars have very specific locking mechanisms. Get to know more about the locks on some of the exit bars we have for sale.
One panic bar with lock that we carry is the Adams Rite 8800 Panic Device. These exit bars come with the mechanism that locks together the door and door frame. They are panic bars for glass doors with aluminum frames that are found on storefronts.
These exit bars come in aluminum or dark bronze with a few sizes to pick from. We also carry replacement parts for these exit bars in case a repair is ever needed.
A similar device, the Adams Rite 8800EL Electric Latch Retraction Panic Hardware, has most of the same features as the 8800. The 8800EL differs in that it has an internal solenoid that is used to retract the latch bolt. You also have the option to choose the voltage with these exit bars.
Some exit bars such as the Doromatic 1990 Panic Device have steel latches for extra safety. Some exit bars such as the International 5530S Surface Vertical Rod Device-Light Duty come with a latch bolt that instantly locks when the door has been shut.
Panic Bars With Alarms
We also carry a wide range of panic bars with alarms. One of these is the Cal Royal 2000 Alarmed Exit Device. These push bars will sound a horn when the door is opened.
You can change the settings for how long the horn should sound for when it is triggered. These come in a few sizes and colors such as aluminum, gold or dark brown.
Cal Royal is not the only brand that makes panic bars with alarms. Von Duprin is another. Take their Series 2670 Exit Alarm Lock for example. These exit bars come with alarms for extra security and use a 9 volt battery.
Panic Bars for Double Doors
If you are looking specifically for panic bars for double doors, it’s important to understand which exit bars work with double doors and which kinds only work on single doors. The Cal Royal 7700 Rim Exit Devices are heavy-duty panic bars for double doors OR single doors. These are meant for buildings with high traffic flow and they come as rim or vertical rod.
Von Duprin is another brand that makes a number of panic bar for double doors. Take a look at the Von Duprin panic bars we sell and you will find plenty that work on double doors.
Delivery Of Exit Security Bars
Many of the exit security bars that we carry have a two week lead time or more. Order your exit door security bars sooner rather than later to get them shipped to you on time and begin the installation process. We will ship your order to you whether you are in the United States or Canada.
Buy Exit Bars Online Today
Let us know if you need help with anything when ordering exit bars from our site, from installation to understanding the types of exit security bars we carry. We have been doing this for years so we have the know-how to steer you in the right direction. We are always happy to lend some advice when you are deciding which exit bars and other door hardware to purchase for your panic bars installation.
We invite customers with inquiries on exit bars to either call us on our main phone at our Troy location or to email us at sales@robertbrooke.com. We hope to make your exit bars order an easy one. Contact us today to get useful answers and solid advice on selecting and installing your exit door security bars.
-
Cal Royal Panic Device 2000 Alarmed
Cal Royal 2000 Alarmed Exit Device
Alarm units has an internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. Jumper cable is provided to swich to continuous alarm. The key switch to turn the alarm off is a standard 1” cylinder with “C” keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with two switches. One switch monitors the push rail and the other switch monitors the latch bolt for full proof security.
Unit includes “EMERGENCY EXIT ONLY. ALARM WILL SOUND” decal for application on door or unit.ALM2000 -
Cal Royal Panic Device 2000 Exit Device
The Cal Royal A2200 Series is a heavy duty Grade 1 device. Available in Panic and 3 Hour Fire Rated versions. The device is non handed, and features a 3/4 inch latch bolt throw. The device is constructed of heavy gauge steel and then powder coated. The non fire rated version will feature dogging, the fire rated version will not. This device retro fits the Sargent 28 Series.
Devices available for 32" and 24" wide doors. Please call 1-800-642-2403 for more information
2000 -
Cal Royal Panic Device 7000 Alarmed
Cal Royal 7000 Alarmed Exit Device
Same as the Cal Royal 7700, but with these added features"
Alarm unit has internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. The key switch to turn alarm off is a standard 1 ¼” cylinder with “C” keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with a switch that monitors push rail only. Unit includes “EMERGENCY EXIT ONLY • ALARM WILL SOUND” decal for application on door or unit.
ALRM7700 -
Cal Royal Panic Device 7700 Rim Device
Cal Royal 7700 Rim Exit Device
For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement. ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs. Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing. Trims are thru bolted for additional security. Conforms & Meets ADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1777 codes. UL Listed for Fire Exit Hardware. Uncompromising security and safety in single and double fire exit doors. Chassis mounted unit construction. Rim and vertical rod devices are non-handed and easily reversible. Available in many different functions. Lever and escutcheon trims are grade 1 construction with clutch free-wheeling mechanism. Rose and escutcheon covers 161 cut out.
Templating matches the Von Dupin 99 and 98
CR7700EO- -
Cal Royal Panic Device 7760 Surface Vertical Rod
Cal Royal 7760 Surface Vertical Rod Exit Device
For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement. ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs. Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing. Trims are thru bolted for additional security. Conforms & Meets ADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1777 codes. UL Listed for Fire Exit Hardware.
Templating matches the Von Dupin 99 and 98
CR7760EO






