Search results for: 'LATCHES'
- Did you mean
- latch 0
- Related search terms
- LATCHES kits for bathroom doors 930
- latches+kick+for+bathroom+door 1049
- LATCHES+kits+for+bathroom+doors 1043
- latches+kit+for+bathroom+door 1049
- latches+kick+for+bathroom+doors 1049
- latches+kits+for+bathroom+door 1044
- LATCHES lock kits for bathroom doors 966
- LATCHES for panic doors 994
- latches lock kit for bathroom doors 966
- latches lock kit for bathroom door 965
-
Von Duprin 8827 Bottom Latch Case 050461
The Von Duprin 8827 Bottom Latch Case 050461 is used on all Von Duprin 8827 non fire rated exits. A non fire rated device is one that has to positively latch every time it closes, you can usually tell, because a non fire rated device has the hex key dogging. Included mounting screws.
Von Duprin Part # 050461
Old part # 10175188VR170 -
Von Duprin 8827-F Top Latch Kit 050462
The Von Duprin 8827-F Top Latch Kit 050462 is the Top Latch Kit for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted postion.
Von Duprin Part # 050462
Old Part # 10267688VR10F -
Von Duprin 55 Rim Latch Bolt Spring 967502
The Von Duprin 55 Rim Latch Bolt Spring 967502 is only used on the 55 Rim Panic Hardware. This spring just keeps pressure on the latch bolt, it does not lift the arm. If your arm is sagging, they you need to tighten the crossbar wedge tite screws and check and make sure the 55R200 55 Hinge Case Spring is not broken. It measures 1-1/2" long by 3/8" diameter.
Von Duprin part # 050354
Old Part # 96750255R210 -
Falcon 650375 F-19-V/F24-V/F25-V/FXX-V Fire Rated Top Latch
The Falcon/Monarch Fire Rated Top Latch is used on the F-19-V, F-24-V, F-25-V, F-18-V and F-XX-V Surface Vertical Rods. The new number from Falcon is 650375, the old Monarch Number was F588. This latch is used on the above devices that are Fire Rated, meaning you can not dog these device in the Unlock Position. If your device has the ability to be dogged open, then use the G588 Non Fire Rated Version
GF588 -
International 5000 Series 58L Escutcheon Trim
International 58L Escutcheon Trim for the 5000 Series Devices
Non-handed, easily install with exit device Escutcheon plate measures 8-1/16" tall by 2-5/8" wide by 29/32" thick. We offer 3 functions, Classroom, Passage and Storeroom.
Classroom - cylinder (not included) locks and unlocks lever handle-Most Popular
Passage - no cylinder hole, lever always active
Storeroom - cylinder (not included) unlocks lever, but lever is always locked when key is removed.58L01- -
Falcon / Dor-o-Matic MEL1690 Panic Device
The same as the Falcon / Dor-o-Matic 1690 with Mechanical Electric Latch Retraction. Some of the features are listed below. A power supply is required.
Hand: Field reversible, non-handed.
Centercase and end cap are powder-coated black only.
Strikes: PB48 top.
Latches: Hex bottom latch (standard), RL - rod bottom latch, PL - Pullman bottom latch
Cylinder: Rim, key entry (NL) or hold back (HB) feature available.
Field selectable.
Sizes: 30", 36", 42", and 48".
Doors: 1-3/4" thick metal doors, specify if other.
Projections: 3-3/8" in neutral position, 23/8" in dogged position.
Pushbar height is 2-1/2.
Stile: 1-3/4" minimum.Replacement parts are also available
Shipped with all screws and strikes.
MEL1690EO- -
International 8000 Series 89L Escutcheon Trim
International 89L Escutcheon Trim
Clutched lever trim for use with the 8000 Series International Door Closer Exit Devices. Escutcheon measures 8-27/32" high by 2-15/16" wide by 15/16" thick. Trim is non handed and easily converted in the field. We offer 3 functions, Classroom, Passage and Storeroom.
Classroom - cylinder (not included) locks and unlocks lever handle
Passage - no cylinder hole, lever always active
Storeroom - cylinder (not included) unlocks lever, but lever is always locked when key is removed.89L01- -
Ives RLPART.1025 Roller and Rivet for RL30/RL1152
Ives RLPART.1025 Roller and Rivet for RL30/RL1152
This replacement Nylon Roller and Rivet Package is for the Ives RL30 and RL1152 Roller Latches. The Roller measures 3/4" high by 5/8" diameter. The Rivet measures 1-1/16" long and is threaded on one side.
Ives Part # RLPART.1025
RL30NR -
Von Duprin 22 Control Link Pin 050529
Von Duprin 22 Control Link Pin
The control link pin is the connector pin, that connects the latch head assembly to the push bar assembly. When the push bar is pushed in it retracts the latch bolt and the pin connects the two pieces. This Control Link Pin is used on the Von Duprin 22, 33A, 98 and 99 Panic Devices.
VON DUPRIN PART # 050529
Old Von Duprin Part # 969520G22R60 -
International Door Closer 5530S SVR Device-Light Duty
International 5530S Surface Vertical Rod Device-Light Duty
All devices are non-handed design
Auxiliary guarded latch deadlocks latch bolt automtically locks when the door is closed
High shock-resistant latching mechanical design or protection from vandalism
All inside components are made of high rust-resistant alloy or heavy electroplated steelStandard 36”: Device length is 33 15/32” (850mm) for 3’ door use, with a standard push bar.
Long 48”: Device length is 44 3/4” (1137mm) for 4’ door use, with long push bar.Standard vertical rod accommodates 7’ or 8’ doors
We offer the aluminum and dark bronze finish online, the polished brass and stainless steel finishes are available.
5530S- -
Von Duprin 88 Active Case 050409
The Von Duprin 88 Active Case 050409 is for use with the Rim Device, which is the model that has the latch bolt sticking out the side of the housing. This version of the housing is for use on the 88EO (Exit Only), 88DT (Dummy Trim) and 88NL (Night Latch) models only. Call or email if you need the Thumb Piece, Knob or Lever Version. The Center Case includes all of the internal workings.
Von Duprin Part # 050409
Old Part # 10166288R10 -
Von Duprin 107765 Plunger Release Bracket
The Von Duprin 107765 Plunger Release Bracket is used with the Fire Rated 8827-F Top Latch. When the door closes, the Release Pin on the 88VR10-F (050462) hits the post and releases the latch from the retracted position. Once the top latch is released, it drops the bottom latch into the floor.
Von Duprin # 107765
G107765- -
Ives FB31P Automatic Flush Bolt
Ives FB31P Automatic Flush Bolt
This fully automatic flush bolt is used on the inactive metal fire door. When the active door is opened the latches retract, when the active door closes the latches extend. The Ives FB31P Body is 1” wide by 6-3/4” long and 2” deep. Bolt throw is 3/4” with a 7/8” adjustment with a 3/4” backset, standard rod is 12” which is measured from the center of latch body to the bolt tip.
Rods are also available in 18”, 24” and 36”, call for pricing. We ship the 12” rods, and this set includes the top and bottom flush bolts.
3 Hour UL listed
Ives Part # FB31P
FB31P- -
Von Duprin NL Drive Screw 090074
Von Duprin NL Drive Screw 090074
The 090074 NL Drive Screw is used on the Von Duprin 22, 98 and 99 Exit Devices to control the rotation of the key cylinder cam. This small set screw, screws into the back of the chassis assembly next to the receptor for the Rim Key Cylinder. The set screw measures 5/16" long by 3/16" diameter. Note: When the NL drive screw is left in back of device, the outside cylinder will function only as a Night Latch. The Night Latch function means the door can only be opened, but not dogged open with the key cylinder.
Von Duprin Part # 090074
Old Von Duprin Part # 970441G090074 -
Dor-o-Matic 1690/1990 Jam Nut PB23
Dor-o-Matic latch rod jamb nut. This nut prevents the latch from coming the rod. Also known as PB23, or GPB23.
Doromatic part # NUT.101
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199023 -
International Door Closer 5510S Rim Device
International 5510S Rim Device-Light Duty
All devices are non-handed design
Auxiliary guarded latch deadlocks latch bolt automtically locks when the door is closed
High shock-resistant latching mechanical design or protection from vandalism
All inside components are made of high rust-resistant alloy or heavy electroplated steelStandard 36”: Device length is 33 15/32” (850mm) for 3’ door use, with a standard push bar.
Long 48”: Device length is 44 3/4” (1137mm) for 4’ door use, with long push bar.5510S- -
Dor-o-Matic 1690 Panic Device
The design of the Doromatic 1690 is ideal for demanding, high-traffic applications. The vertical rods and latch mechanisms are concealed in the vertical door stile, ensuring trouble-free operation. Cast metal cover plates and end caps hold up to rigorous use. A quick, singlepoint dogging feature in the housing deactivates the device, permitting unrestricted traffic flow. The Doromatic 1690 may also be used to retrofit a Doromatic 1990 Series crossbar device.
Replacement parts are also available
Shipped with all screws and strikes. The 1690NL Cylinder Assembly (169CA) is required if you wish to use a key cylinder on the exterior, SEE RELATED PRODUCTS toward the bottom of the page.
1690EO