Search results for: 'plate flat panic bar door'
-
Back to Back Offset Door Pull 1.25 inch
Back to Back mounted Off-Set Door Pull featuring 1-1/4 inch stock diameter stock. Handle has a 4 inch offset with a 2 inch clearance and 3 1/4" projection. Available in 12 or 18 inch centers. Sold as sets, 2 handles and 3/8-24 thread stud.
Back to Back fasteners are for a 1-3/4 inch thick door, if your door is a different thickness, please let us know in the comments.
Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.
GHEM39xM39 -
Handicap Door Pull 18
With the Handicap Door Pull 18 you are able to get a closed fist behind the pull, which makes it a great ADA Door Pull. Shipped with screws. Also known as a Single Arm Pull, Handicap Grip, ADA Door Pull or Handle. The handle is constructed of cast aluminum, or brass and then plated. The base plate measures 1-3/4" by 2-3/4", the handle projects our 3-1/2". Ships with #6 by 5/8" matching finish sheet metal screws.
GHP200- -
Back to Back Mounted Handle 1 Inch Diameter
Back to Back mounted 1 inch diameter stock. One handle will be threaded and the other will be a female fitting that snugs the handle with a set screw. The standard Stud that ships with the handle is for an 1-3/4 thick door.
Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.
GHE26x26 -
Offset Pull Handles mounted Back to Back
The Door Pull Offset #39 Handle is constructed of either solid aluminum, brass or stainless steel. The handle is 1" diameter tubing with a 2-3/4" offset and 2-3/4" projection. This is the most common type of handle you use today. Just about every aluminum framed storefront door has a version of this handle. This handle is available in 8", 10", 12" and 18" centers on the mounting holes. The back to back mounting is for Metal or Wood Doors that are 1-3/4 thick. Included fastener is threaded into one of the handles, and the Stud End has fits into the inside handle and is held in place by a set screw on the handle.
Package includes two offset pull handles and fastening hardware. Shown in Polished Stainless Steel with 12 inch centers.
Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks.
GHE39x39 -
Back to Back Mounted Handles 3/4 Inch Diameter
Back to Back mounted handles constructed of 3/4 inch round stock. One handle will be threaded and the other will have a stud mounting that is secured by a set screw. The connecting stud is for 1-3/4 inch thick doors, if you door is a different thickness let us know in the Comments Section of the Check out process, or email us.
Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.
GHE25x25 -
Floor Door Stop / Holder 536
Floor Door Stop / Holder 536
The Stop and Holder 536 is considered a manual door holder. It is a manual door holder because you have to physically bend over and hook and unhook the holder. This holder is constructed cast brass or cast bronze and then plated to your desired finish. The stop measures 2-1/2" in diameter and 3-7/8" overall height, with a center line height of 2-1/2" from the base to the center of the rubber stop. It ships with all of the fasteners.
GJ536- -
Corner Guard 311 2" X 2"
The Corner Guard 311 are a great way to protect corners in areas of high traffic and high abuse, such as warehouses and hospitals. Fabricated from 16 gauge (.050") thick metal they measure 2" on both arms, and can come in any length. Standard lengths are 36", 42" and 48", but we have the capability to modify to your specifications. They come standard with screw mounting, but other options are available.
Screws included for mounting
GCG311 -
Concealed Surface Mounted Bolt
Fully concealed mounting design which enhances appearance and security. Furnished with universal top strike and flat bottom strike. The bolt measures 8 x 1 inches and is constructed of extruded steel with a brushed chrome finish. Ships with mounting screws, and the latch is UL listed.G597 -
Plunger Type Door Holder / Stop 583
The Plunger Type Door Holder / Stop 583 is constructed of solid cast brass, that is then plated to the desired finish. It measures 5-3/8" by 2-1/4" base with a 1-1/4" projection. The throw is 1-1/4". These are sometimes called pop-up or push down stops. This piece will ship with matching finish mounting screws.
GJ583- -
Floor Door Stop 524
Floor Door Stop 524
The 524 Door Stop is one of the more interesting door stops we have. They are constructed of cast brass that is then plated to your finish. It measures 1-1/4" in diameter and is 1-1/2" tall. One of the benefits of this door stop is there are no exposed screws. The 524 ships with a 12-24 x 1" machine screw, a plastic anchor and a lead anchor.
GJ524- -
Floor Door Stop Dome 1" Height 522
Floor Door Stop Dome 1" Height 522
This contemporary looking Dome Stop has been a hot selling in the last few years. The stop is constructed of forged brass, that is then chrome plated and brushed to the satin finish. At this time, only brushed or satin chrome is available. The base is 1-11/16" wide by 4" long and 1" tall. The base is 5/16" thick. This door stop ships with wood and machine screws and all of the anchors.
GJ522 -
Floor Door Stop Dome 1-1/4" Height 523
Floor Door Stop Dome 1-1/4" Height 523
This contemporary looking Dome Stop has been a hot selling in the last few years. The stop is constructed of forged brass, that is then chrome plated and brushed to the satin finish. At this time, only brushed or satin chrome is available. The base is 1-11/16" wide by 4" long and 1-1/4" tall. The base is 1/2" thick. This door stop ships with wood and machine screws and all of the anchors.
GJ523 -
Door Pull Offset 1" Diameter 39
The Door Pull Offset #39 Handle is constructed of either solid aluminum, brass or stainless steel. The handle is 1" diameter tubing with a 2-3/4" offset and 2-3/4" projection. This is the most common type of handle you use today. Just about every aluminum framed storefront door has a version of this handle. This handle is available in 8", 10", 12" and 18" centers on the mounting holes. If you have a 9" centered handle use the PH-4000. It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Offset Door Handle or Door Grip, and Storefront door handle.1" diameter material
GHE39 -
Wall Door Holder/Stop 531
The Wall Door Holder/Stop 531 features cast brass or bronze finish which is then plated to the desired finish. This is considered a manually operated door holder, because it does not latch automatically. It features a 2-1/2" base with 3-5/8" projection, and ships complete with all of the needed fasteners.
GJ531- -
C Shaped Offset Pull
The C Shaped Offset Pull has 12 inch centers and has a 13 inches overall length. The clearance is 1-1/2 inches with a 2-1/2 inch projections. The handle is constructed on 1 inch diameter stock, the offset is 7 inches. The base is 7/8 inch round stock. The handle is furnished with thru bolts and finish washers.
Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.
G49D- -
C Shaped Offset Pull 1-1/4 Diameter Stock
The C Shaped Offset Pull has 12 inch centers and has a 13-1/4 inches overall length. The clearance is 1-1/2 inches with a 2-3/4 inch projections. The handle is constructed on 1-1/4 inch diameter stock, the offset is 7-1/2 inches. The base is 1 inch round stock. The handle is furnished with 5/16-18 thru bolts and finish washers.
Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.
GM49D- -
Door Pull Handle 11
The Door Pull Handle 11 has 8" center to center screw spacing. The base is 3/4" diameter, the overall lenght is 9-1/4". The projection is 2-1/8" and the clearance is 1-1/2". Also known as a 8" Center Door Grip or Door Handle. This handle is shipped with thru bolts and finish washers.
GHE11- -
Automatic Wall Mount with Adjustable Strike
The 538 Automatic Door Holder is constructed of cast brass, and then chrome plated. The wall mounted strike has a pivoting head to adjust to different angles. The Holder/Stop measures 3-11/16 x 3 inch base, the stop projects out 1-15/16, and the strike projects out 3-1/4 inches. Holder/Stop ships with fasteners.
Only available in Brushed Chrome Finish.
GJ538 -
Door Pull Handle 23
The Door Pull Handle 23 features two closed ends. This Door Pull is also known as a Door Handle or Door Grip. The dimensions are 14" overall length, 8" centers, with a 3/8" by 1-1/4" handle cross section. The mounting post has a 1" diameter, and the handle projects out 1-7/8". The handle ships with thru bolts and finish washers. It is constructed of aluminum, stainless steel or brass depending on the finish you are looking for.
GHE23- -
Door Pull Handle 16
The Door Pull Handle 16 has an overall length of 7-1/2". The base diameters are 2" with three holes each. The handle projects out 2-1/4" and has a clearance of 1-1/2". Also known as a Door Grip or Door Handle. This handle ships with 6 wood/sheet metal screws.
GHE16- -
Door Pull Handle 22
The Door Pull Handle 22 features an opened end and a closed end pull. This Door Pull is also known as a Door Handle or Door Grip. The dimensions are 14" overall length, 8" centers, with a 3/8" by 1-1/4" handle cross section. The mounting posts have a 1" diameter, and the handle projects out 1-7/8". The handle ships with thru bolts and finish washers. It is constructed of aluminum, stainless steel or brass depending on the finish you are looking for.
GHE22- -
Door Pull Handle 24
The Door Pull Handle 24 features a 6" center to center screw spacing. The handle is constructed of aluminum, stainless steel or brass depending on the desired finish. The handle is 1" solid diameter stock and the mounting posts are 3/4" diameter stock. It measures 8" overall length and projects from the door 2". It ships with thru bolts and finish washers. Also known as a Door Handle or Door Grip.
GHE24- -
Door Pull Handle 21
The Door Pull Handle 21 has a cross section dimension of 1/2" x 1" and is made of half round (underside is round) stock. The handle projects out 2-1/8" with a clearance of 1-5/8". This handle is available in 6" and 8" center to center mounting holes, but can be made in different Center to Center dimensions. This product is also known as a Door Handle or Door Grip. The handle ships with thru bolts and matching finish washers.
GHE21 -
Floor Door Stop / Holder Heavy Duty 541
Floor Door Stop / Holder Heavy Duty 541
This Floor Mounted Door Stop is a personal favorite. It is extremely heavy duty, and is ideal for areas of high vandalism. Includes the 4-1/2" lag bolt & lag shield. The rubber base is 3" in diameter and is 3" high. Uses a 3/4" diameter hole for the lag sheild.
RB541 -
Wall Mounted Automatic Door Holder 533
The 533 Automatic Wall Type Holder and Stop is a commercial grade door holder. The holder is mounted on the wall and strike is mounted on the door. It is constructed of cast brass, and measures 2 x 2-1/2 base and 2-1/8 inch high. Currently it is only available in brushed chrome.
GJ533