Search results for: 'dorma spring door cast dodge matic von'
-
Von Duprin 6112 24 VDC Electric Strike
Von Duprin 6112 24 VDC Electric Strike
Von Duprin 6100 Series electric strikes are designed for use with Rim devices. The 6112 has a 3/4” latch bolt throw, 9” face plate length, 1-5/8” width, and an 1-3/4” backbone depth. The lock retrofits the Folger Adams FA 310-4. Other voltages and replacement parts are available.
FSE - Fail-secure. Requires power to be applied to unlock the strike lip. On loss of power, the strike lip is locked-Fire Rated
FS - Fail-safe. Requires power to be applied to lock the strike lip. On loss of power, the strike lip is unlocked. Non Fire-Rated.
VD6112 -
Dor-o-matic 1490 149CA-HB Cylinder Assembly
No longer available, we do have some of the GPB116 Cam Assemblies left.
Doromatic 1490 Cylinder Assembly 149CA-HB
Doromatic part # 149CA-HB
149CA-HB -
LCN Door Closer Hold Open Head And Tube 3048 - 3048L
The LCN Door Closer Hold Open Head And Tube 3048 - 3048L. As the arm rotates the pivot point threads close on to the mounting bracket face and create a friction catch. If yours is new, try rotating the mounting plate 180 degrees so the threads tighten as it closes. This replacement part from LCN either breaks or wears out. The material some times wears out due to the friction of open and closing. But the biggest issue seems to be the point where the tube mounts to the cast iron connector.
Specify your current closers model number when ordering. Not all of the LCN closers have the same shape spindle on the door closer cylinder. Model Available here are the:
1260-3048
1260-3048L
1460-3048
1460-3048L
4010-3048
4010-3048L
4020-3048
4020-3048L
4040-3048
4040-3048L3048 -
Von Duprin 2227 Bottom Latch 050090
The Von Duprin 2227 Bottom Latch 050090 replaces and updates all 2227 bottom latches to the new style if you device was shipped before October 1998. If your device was shipped after October 1998 then use the G050401.
Includes screws and bracket
Von Duprin Part # 050090
G22VR120 -
Wall Mounted Door Stop WS33
The Ives Wall Mounted Door Stop WS33 is another hold back part from the Glynn-Johnson door stop era. I can not remember the Glynn-Johnson part #, but when Ives purchased them, they changed it to WS33. This stop is constructed of cast brass that is then plated to a brushed chrome finish. It features a replaceable rubber bumper with offset shoulder screws into cavity on body to prevent loss or theft. And a sloping design that discourages vandalism.The base height is 3" with a width of 2-1/4", and a projection of 3-3/4", WS33 is furnished with wood screws for drywall mounting.
WS33 -
Von Duprin 050536 HD-EL Solenoid
Von Duprin 050536 HD-EL Solenoid
Electric Latch Retraction for Von Duprin Exit Devices with Hex Key Dogging. #4 on the diagram below large picture.
Von Duprin part # 050536
Old Part # was 110740No longer available, the only solution we have at this time is to upgrade to the HD-QEL Base Plate.
G050536 -
Norton Apollo Door Closer 7500
The Norton Apollo Door Closer 7500 has been around for quite a long time, and was designed to replace the older 7700, which are still made. The beauty of the 7500 is that is can be mounted left or right, push, pull or top jamb, were as the 7700 you had to specify all those attributes, which made stocking them a head ache. This is a Grade 1 closer, and is extremely durable. If you are looking for a 7500BF, the barrier free version, the new 7500 is barrier free, and will do the trick. This closer has a 2-3/8" x 6-3/4" hole spacing.
7500- -
Von Duprin 2227 Top Latch 050091
The Von Duprin 2227 Top Latch 050091 latch is used on devices shipped before October 1998, see related products for the new style latch if your device is newer. This is usually the problem if your bottom rod is dragging on the floor. Latch measures: 1-1/16" wide x 4-5/16" long (less latch bolt) x 1-7/8" projection at the highest point. Includes screws.
Von Duprin Part # 050091
G22VR10 -
Door Foot Pull
Foot Pull
The Foot Pull is a device for public restroom doors that allows one the option of opening the door using their foot instead of their clean hands. The Foot Pull has been installed in thousands of schools, hospitals, restaurants and office buildings across the US and Internationally, and a 99.95% approval rating, the Foot Pull is truly a "why didn't I think of that" idea with a wide open future. The pull measures 8" across by 7" tall with a 3-3/8" projection. The plate is made of die cast alumunum with a distressed finish.
Package Includes:
1 Foot Pull, Instructions, door signs and all
hardware needed for installation.GFPULL -
Von Duprin 050709 Old Style Dogging Assembly
The Von Duprin 050709 Dogging Assembly is used to update the Von Duprin 22, 33, 35, 98 and 99 device shipped before 1997. The dogging key on this assembly is 5/32", and you would want to use the longer version of our 88R60 dog key.
Von Duprin Part # 050709
Old Part # 050153G050709 -
Von Duprin 9927 Top Latch 050091
The Von Duprin 9927 Top Latch 050091 used on all the Von Duprin 9827 and 9927's. Replaces and updates all 9827 and 9927 bottom latches to the new style, if your device was installed before October 1998. If your device is newer then October 1998, then use the G050400. This is usually the problem if your bottom rod is dragging on the floor. Latch measures: 1-1/16" wide x 4-5/16" long (less latch bolt) x 1-7/8" projection at the highest point. Includes screws.
Von Duprin Part # 050091
G99VR10 -
Wall Door Stop / Bumper Heavy Duty Convex WS402CVX
The Ives WS402CVX Wall Door Stop is our heaviest duty wall stop of this design. They are constructed of a heavy duty cast brass base that is then plated to your desired finish. The wall stop is 2-1/2" in diameter and has a 1" projection. It features a special retainer cup that makes the rubber tamper resistant. This stop ships with screw and drywall anchor.
GJ50C- -
Von Duprin 55 Dog Screw-090053
The Von Duprin 55 Dog Screw-090053 is the newer version, meaning less then 25 years old. It measures 3/8" diameter by 1/2" long with 14 threads per inch. They did have an old style that was available up to a few years ago that had 15 threads per inch. If you have any old style I would recommend the D100 Panic Bar Retainer.
Von Duprin part # 090053
55R85 -
Von Duprin Strike 248L-4
The Von Duprin 248L-4 Strike is used as a Bottom Surface Mounted Strike on the 2227, 8827, 9927, and 9827 Surface Vertical Rod Panic Devices. The 248L-4 strike measures 9/16" wide by 2-1/2" high with a hole spacing of 1-7/8. The strike projects out 3/8". Ships with shim and mounting screws. Burnished steel construction.
Von Duprin Part # 248L-4
248L-4 -
Von Duprin 050814 Solenoid Kit for E996
The Von Duprin 050671 and 050814 solenoid have been discontinued. All of our stock is gone. Von Duprin has come out with a retrofit kit to update your E996 Lever to the M996 Lever. The kit changes out the solenoid for a mortorized version, more robust and uses less current. The newer version can be found by searching for M996.
This solenoid is used on the E996 Electrified Lever Trim. The Solenoid body measures 1-3/8” x 9/16” diameter, mounting bracket has a 3/4” on center hole spacing. The wiring harness has a two wire plug. We some times fine the number 991342 on the solenoid.
New for 2024 Von Duprin has come up with a Mechanical Electrified Conversion kit. This kit converts the EL Solenoid to a Mechanical Electrified Trim. More information can be found @ https://www.robertbrooke.com/von-duprin-m996l-retrofit-kit.html
Von Duprin Part # 050814
Von Duprin Part # 050671G050814 -
Von Duprin 8827 Chassis Tie Rod Pkg 050328
Von Duprin 8827 Chassis Tie Rod Pkg 050328
The 8827 Chassis Tie Rod Package is the rod that goes through the top and bottom latches. The Tie Rod is held in place by the Special Chassis Nut. The Tie Rod measures 1-3/8" long by 3/16" diameter.
Von Duprin Part # 050328
Old Von Duprin Part # 96761688VR195 -
Von Duprin 386NL Dummy Trim
Von Duprin 386NL Dummy Trim
This Von Duprin 386NL Night Latch Trim is just a pull handle. The bolt pattern of the trim plate lines up with the Von Duprin 33A on the inside so they are on cohesive unit. The base plate measures 7-15/16" by 1-5/8". The grip measures 8-1/2" by 4-5/16" with a 2-7/16" projection. This 386NL Night Latch Trim is handed. Uses a standard Rim Cylinder.
386NL -
Cal Royal Products CR441 Door Closer
The Cal Royal Products CR441 Door Closer is an inexpensive replacement for the LCN 4040. The mounting holes on the CR441 matches the 4040, at more than 1/2 the cost. This closer will work on the left or right, push, pull or top jamb for mounting. Just like the LCN 4040 it features adjustable spring tension, closing, latching and back check speeds. It is considered a Grade 1 closer, which is the heaviest rating possible.
CR4040- -
LCN Door Closer 2031 -2035
The concealed LCN Door Closer 2031 -2035 Pacer® is a heavy duty closer designed to fit in a narrow, minimum 1 3/4” aluminum transom. It is considered an application specific closer, due to the cylinder spring sizing and handing. The standard 2030 series closer shipped with standard arm, standard track, mounting/finish plate, and wood and machine screw pack. Aluminum frame requires minimum 1 3/4” x 4” tube.
2030 -
Wall Door Stop WS11
The WS11 door stop used to be under the Glynn-Johnson product line as the WB11 until they merged with H.B. Ives. At that point they became the WS11. This stop only is constructed of cast brass and then plated to your desired finish. The stop has a 2" diameter base and projects from the wall 3-3/4". This particular model is the same as the WS11x, except that it is designed for wood or drywall mounting and ships with wood screws and anchors.
GJWB11- -
Von Duprin 6113 24 VDC Electric Strike
Von Duprin 6113 24 VDC Electric Strike
Von Duprin 6100 Series electric strikes are designed for use with Rim devices. The 6113 has a 3/4” latch bolt throw, 6” face plate length, 1-5/8” width, and an 1-15/16” backbone depth. The lock retrofits the VD 3011 and VD 3021. Other voltages and replacement parts are available.
FSE - Fail-secure. Requires power to be applied to unlock the strike lip. On loss of power, the strike lip is locked-Fire Rated
FS - Fail-safe. Requires power to be applied to lock the strike lip. On loss of power, the strike lip is unlocked. Non Fire-Rated.
VD6113 -
Wall Door Holder/Stop 531
The Wall Door Holder/Stop 531 features cast brass or bronze finish which is then plated to the desired finish. This is considered a manually operated door holder, because it does not latch automatically. It features a 2-1/2" base with 3-5/8" projection, and ships complete with all of the needed fasteners.
GJ531- -
Von Duprin 050537 HD-EL Solenoid Plunger
Von Duprin 050537 HD-EL Solenoid Plunger
#5 On Diagram under "More Views". Measures 3" long x 7/8" diameter.
Works On The Von Duprin 33A/35A And 98/99 Exit Devices
No longer Available
G050537