Search results for: 'door series 30 pull bar panic exit de99 parts'
- Did you mean
- door series 30 pull bar panic exit dead parts 0
- door series 30 pull bar panic exit deep parts 0
- door series 30 pull bar panic exit dent parts 0
- Related search terms
- door series 30 push bar panic exit dor parts 1311
- door series 30 pull bar panic exit dor parts 1310
- door series 30 push bar panic exit deep parts 1310
- exit door panic device square screws parts 1318
- exit door panic devices square screws parts 1318
- exit door panic devices square screw parts 1317
- exit door panic devic square screws parts 1317
- exit door panic device square screw parts 1317
- door series 30 pull bar panic exit deep parts 1309
- dooramatic door series 30 push bar panic exit devic parts 1315
-
Sargent 624 Bottom Surface Strike
The Sargent 624 Bottom Surface Strike is used on the 20, 30, 60, 80 and 90 Series Surface Vertical Rod Panic Hardware. The Strike is mounted on the floor and the bottom latch locks on to it. Strike measures 9/16" x 2-1/2" with a 3/8" projection. Strike features a black coated epoxy.
Sargent Part #624
G624 -
Jackson Panic Device Top Bolt Guide Assembly 1085/1285/2086
The Jackson Panic Device Top Bolt Guide Assembly is used on the 1085, 1285, and 2086 hardware. The piece works by sliding over the top rod when the device is opened. This keeps the rods retracted until the Plunger hits the Trip Assembly when it is closing. Upon hitting the Trip Assy, the plate slides over and the rods retract. It measures 1-1/2” deep x 1-1/16” wide x 15/16” tall, with a hole spacing of 3/4" on the mounting screws. Assembly includes the mounting screws. The Jackson Part number is 30-934.
G108518 -
Detex EAX-500 Battery Powered Door Exit Alarm
Detex EAX-500 Battery Powered Door Exit Alarm
The Detex EAX-500 Series is designed for applications requiring a battery-powered alarm on secured doors. The alarm, with approximately 100dB, will sound when an unauthorized exit occurs. The redesigned shape and smaller size of the EAX-500 makes it the ideal choice for quick and easy installations on emergency exit and restricted doors.
Mortise cylinder sold separately
Uses a standard 9 volt batteryEAX500- -
Push Bar Adjustable 451
Push Bar Adjustable 451
Finishes:
US3/605 polished brass
US4/606 brushed brass
US10B/613 dark bronze
US26/625 polished chrome
US26D/626 brushed chromeMaterial: Brass
Material Size 5/8" round tube adjustable to 36"
Base: 5/8" x 5-5/8"
Clearance: 1/2"
Projection: 1-1/8"451- -
Push Bar W/Offset Grip PP-2000
The Push Bar W/Offset Grip PP-2000 is what we usually find on most aluminum framed glass store front doors. This particular set can usually ship within 24 hours, and comes in grip sizes of 9", 10" and 12" centers. The push bar has 33-1/16" centers. It is constructed of 1" solid aluminum that is anodize clear (aluminum) or dark brown. It ships with all of the hardware needed for an 1-3/4" thick door. At this time we are not able to sell the fasteners separately.
PP-2000 -
LCN Door Closer 4011
The LCN Door Closer 4011 is known as the Smoothee. The door closer ships with regular arm, standard plastic cover, and self reaming and tapping screws. This is considered an application specific closer, meaning you have to specify left and right swing door, and it can only be mounted as a regular armed closer. A regular armed closer is a closer that is mounted on the pull side of the door. The non sized clinder will work on doors from 30" to 60" interior doors, or 26" to 48" exterior doors, and can be adjusted to meet ADA specifications. This door closer is ideal for areas of high traffic and abuse, like schools or any other areas of extreme use. We ship the 4011 REG.
4010 -
Door Step N Pull
Step N Pull®
Stop the spread of germs with this ingenious product. Simple step on the plate and pull the door without grabbing the door pull.
Includes:
- One StepNpull®
- Required mounting screws
- Two stickers, one for the door and the other for the mirror, paper towel dispenser or hand dryer. Actual dimensions are 5"x4"
Currently we only have Aluminum in stock.
Available in Aluminum, Gold or Copper Finish-See Color under "More Views"GSNP- -
Yale 7100F Series Latch Assy 60-7000-0425-048
Yale 7100F Series Latch Assembly
This Yale Latch Assembly is used on fire rated panic devices. A fire rated panic is a device were you can not lock the latch in the open position. It is used on doors were the engineers want the door to latch every time it closes to contain a fire.
Yale Part # 60-7000-0425-048
G6070000425048 -
Door Pull Handle 10
The Door Pull Handle 10 has 5-1/2" center to center screw spacing. The base is 3/4" diameter, the overall lenght is 6-1/4". The projection is 2" and the clearance is 1-1/2". Also known as a Door Handle or Door Grip. This handle ships with thru bolts and finish washers.
GHE10- -
Door Pull Handle 16
The Door Pull Handle 16 has an overall length of 7-1/2". The base diameters are 2" with three holes each. The handle projects out 2-1/4" and has a clearance of 1-1/2". Also known as a Door Grip or Door Handle. This handle ships with 6 wood/sheet metal screws.
GHE16- -
International Door Closer 9001-TP Series
The International Door Closer 9001-TP Series is a relatively newer closer. This closer features fully adjustable spring tension, closing and latching speeds and back check. The narrow design allows for mounting on the top jamb of store front doors without a drop plate. The closer is non handed, and can be mounted on the push, pull or top jamb positions. It meets all ADA requirements and is a Grade 1 closer, the heaviest rating possible.
3/4" X 11-3/32" Hole Spacing
9001P- -
Detex EAX-500W Weatherized Battery Powered Door Exit Alarm
Detex EAX-500W Weatherized Battery Powered Door Exit Alarm
The Detex EAX-500W Series is designed for applications requiring a battery-powered alarm on secured doors. The alarm, with approximately 100dB, will sound when an unauthorized exit occurs. The redesigned shape and smaller size of the EAX-500W makes it the ideal choice for quick and easy installations on emergency exit and restricted doors. The weatherized version is for use on out swinging doors that may get wet due to rain, or wet environments.
Mortise cylinder sold separately
Uses a standard 9 volt battheryEAX500W- -
Sargent 20/60 Plastic End Cap Only 68-0434
The Sargent 20/60 Plastic End Cap Only 68-0434 will also work on the 30 Series Panic Hardware. The cap has been manufactured for the last 40 years and is made of high impact plastic. The end cap measures 1-5/8" wide by 2-3/8" tall and projects out 2-3/4".
Sargent Part # 68-0434
G20300C -
Push Bar Adjustable 452
Push Bar Adjustable 452
Finishes:
US26/625 polished chrome
US26D/626 brushed chrome
US3/605 polished brass
US4/606 brushed brass
US5/609 antique brass
US10/612 brushed bronze
US10B/613 dark bronzeMaterial: Brass
Material Size: 5/8" round tube adjustable to 36"
Base: 5/8" x 8-1/2"
Clearance: 1/2"
Projection: 1-1/8"452- -
Door Pull 25 3/4" Diameter
The Door Pull 25 is made of 3/4" round stock in either solid, Aluminum, Brass or Stainless Steel. The handle has a 2-3/8" projection from the door, and 1-5/8" clearance from the door to the back of the handle. It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Door Handle or Door Grip.
GHE25 -
Finger Protector For Doors - Exterior Pull Side
Door Finger Protector - Exterior Pull Side
This model is specifically designed for exterior doors on the pull side of the door. This patented Finger-Gard product is designed for both exterior and interior doors and thus will operator in very cold and very hot tempetures. Flexible to minus 40 degrees. They are made of a special rubber that is resistant to harsh sunlight. They will allow the door to swing up to 180 degrees. This product is available in Brown or White, 78" or 83" lenghts
Our part # on this is GFG7 for the 78" length, and GFG7+ for the 83" length.
GFG-D -
Door Pull Handle 23
The Door Pull Handle 23 features two closed ends. This Door Pull is also known as a Door Handle or Door Grip. The dimensions are 14" overall length, 8" centers, with a 3/8" by 1-1/4" handle cross section. The mounting post has a 1" diameter, and the handle projects out 1-7/8". The handle ships with thru bolts and finish washers. It is constructed of aluminum, stainless steel or brass depending on the finish you are looking for.
GHE23- -
Monarch 17/18/19 Series Dogging Cover
Monarch 17/18/19 Series Dogging Cover
This Monarch 17/18/19 Series Dogging Cover goes over the dogging mechanism on the hinge side of the exit device. Sometimes when the end cap goes missing, this cover plate also disappears.
Monarch old part #s 195 and 194
Monarch/Falcon new part #'s 650297 and 650303G19R80 -
Door Pull Offset 3/4" Diameter 29
The Door Pull Offset 3/4" Diameter #29 is constructed of either solid, Aluminum, Brass or Stainless Steel. The handle 3/4" diameter tubing with a 2-1/2" projection and 2-1/2" offset. We find these on narrow stile aluminum framed glass storefront doors. It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Door Handle or Door Grip.
GHE29