Search results for: 'fixed doors'
- Did you mean
- find doors 0
- field doors 0
- fire doors 0
- fixed door 0
- Related search terms
- fixed door locking parts von dark 1255
- fixed door parts american device h 161 1263
- fixed door parts american device h 1960 1252
- fixed door parts american device h 16 1296
- fixed door parts american device h 1260 1261
- fixed door parts american device h 18 1280
- fixed door parts american device h 165 1256
- fixed door parts american device h 1409 1262
- fixed door parts american device h 105 1253
- fixed door parts american device h 195 1263
-
Bilco Barracuda DSI for In Swinging Doors
The Barracuda DSI is designed for In Swinging 36" Doors. The user places the deive on the floor and slides the metal plates under the door. Then pushing outward on the handles engages the plates to the exterior door jamb. Then you simply install the locking pin to barracade the door. The device is manufactured of heavy-duty steel that is then coated in a durable powder coat paint. It will work on just about any door and comes in 6 different versions depending on your jamb width. It is lightweight and comes with a storage mounting rack, along with all the the needed hardware for installation.
Barracuda Part Number
4-3/4" DSI-2
5-3/4" DSI-1
6-3/4" DSI-3
7-3/4" DSI-4
8-1/4" DSI-5
8-3/4" DIS-6DSI -
Wall Door Stop / Holder WS45
The Ives Wall Door Stop / Holder WS45 was introduced about 50 years ago as the Glynn-Johnson W45A or GJW45A. When they were purchased by H.B. Ives, it became the WS45. They are constructed of cast Brass or Bronze and then plated to the desired finish. This door stop is unique because the wall does not have to be parallel to the door for it to latch and hold the door open. Spring loaded roller rides up the face of the strike, seating itself on the strike, holding the door firmly in the open position. A heavy rubber pad cushions the shock and absorbs the sound. With unit mounted on door and the strike on wall, vertical adjustment is available on body. The strike is adjustable 45 degrees left or right, both adjustments easily accomplished at time of installation or at a later date. WS45 strike is furnished with wood screws for drywall mounting.
GJW45A- -
Falcon OHC100 and OHC101 Door Closer Body Only
The Falcon OHC100 and OHC101 Door Closer Body Only are designed for a wide variety of Doors. The OHC100 is for use on larger exterior doors and has spring size adjustments of 3-5. The OHC101 is designed for smaller or interior vestibule doors, with an adjustable spring size of 1-3.
OHC100- -
LCN Door Closer 4041XP-Hw/PA
The LCN Door Closer 4041XP-Hw/PA is the 4040XP, eXtra Protection closer with the 4040XP-3049 Hold Open Arm. You get the same performance of one of the most revered closers with the functionality of the friction hold open arm. The cylinder features cast iron construction, forged steel arm, double heat treated steel pinion, non-handed, LCN® “Green Dial” spring force indicator, Peel-n-Stick templates, UL and cUL Listed, 3⁄4″ journal diameter pinion, full compliment bearing, and tested and certified under ANSI standard A156.4, Grade 1. With this package you have the flexibility to mount the closer on a left, right, push, pull or top jamb mount. The hold open point is adjustable by loosening or tightening the hold open nut on the arm.
4040H- -
LCN Door Closer 1261
The LCN Door Closer 1261 Series combines the best features from the previous 1070 and 1370 into a single versatile and economical cast iron closer, with Tri mounting capability. The 1261 is the door closer I would recommend if you are tired of replacing your store front door closers because of leakage. The 1261 is the most heavy duty standard template closer that is made. This door closer will work on the push, pull or top jamb, and is non handed. The 1261 is adjustable spring sizes 1-5 and mounts to the most common commercial footprint. The 1261 also features a complete line of regular and extra duty arms, LCN’s peel-n-stick installation templates, a convenient spring adjust pointer. The hole spacing is 3/4" x 9-1/16", so it is considered a standard template closer. LCN also offers a 20 year warranty on this closer. The Brass finish is Painted Brass.
We ship the 1261 Rw/PA
1260- -
Sargent Door Closer 351
The Sargent Door Closer 351 is the most heavy duty closer made by Sargent. This closers meets ADA requirements, meets the Buy American Act, and is certified Grade 1, the heaviest rating possible. The closer has the capability to be mounted on the push, pull or top jamb, and is non handed. It ships with arm, plastic cover, parallel arm bracket and all of the fasteners. The hole spacing is 2-1/2" x 9"
350- -
Falcon SC71 Door Closer
The Falcon SC71 Door Closer used to go by the Doromatic SC71. This is a higher quality door closer at a more affordable price. This closer offers adjustable closing, latching and back check speeds, along with adjustable spring tension. It has the ability to be mounted on the push, pull or top jamb and is non handed. This closer is considered a Grade 1 closer, which is the highest grade you can get. The hole spacing is 2-3/8” x 6-3/4”, which is the same hole spacing as the Norton 7500 and Yale 4400 door closers. We ship the SC71 Rw/PA
SC70- -
4" Kickdown Door Holder FS455
4" Kickdown Door Holder FS455
The H.B. Ives FS455 is what people think about when they say Kick Down Door Stop. This design has been around for almost 50 years and is try and true. Durable and ascetically pleasing to look at. This door holder features a simple hold and release, activated with a touch of the foot. They are constructed of cast brass or aluminum depending on the finish that you are looking for. The rubber tip is a non-marring and is corrugated on the bottom so it will not slide on the floor, and is easily replaceable, look under related products for the replacement shoe. This holder is for door to floor clearances of less than 2". This is an ideal door holder for the home, office, church or school.
Made by H.B. Ives
GJ44- -
Door Pull Handle 16
The Door Pull Handle 16 has an overall length of 7-1/2". The base diameters are 2" with three holes each. The handle projects out 2-1/4" and has a clearance of 1-1/2". Also known as a Door Grip or Door Handle. This handle ships with 6 wood/sheet metal screws.
GHE16- -
Wall Door Stop / Holder WS20
The Ives Wall Door Stop / Holder WS20 is another door holder from Glynn-Johnson. The Chicago based manufacture made these for 40 plus years. When they were purchased from H.B Ives and merged into there line they became the WS20. This holder is constructed of cast brass and then plated to your desired finish. The hinged holding clip can be released by a gentle pushing on the door, which causes the clip to flip up and release the door. The piece ships with wood screws and anchors.
GJW20- -
Floor Door Stop / Holder FS43
Floor Door Stop / Holder FS43
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF43A or F43A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS43. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 1-5/8" to 2-1/16"
Holder Dimensions 3" Wide x 3-11/16" HighGJF43A- -
Dorma 7414 Door Closer
Dorma 7414 Door Closer
The Dorma 7414 Series door closer features back check and adjustable spring sizing and is the ideal solution in a wide variety of applications, including barrier-free. This Grade 1 hydraulic surface door closer is both flexible and easy to install. The 7414 Series offers a compact design and is available in a variety of sprayed finishes to complement any opening’s decor.
Dorma part # 7414ARP689
3/4" X 10-1/4" Hole Spacing
7414- -
Floor Door Stop / Holder FS40
Floor Door Stop / Holder FS40
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF40A or F40A, and was brought over to the H.B. Ives line in the 1990's. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 1/2" or less
Holder Dimensions 3" Wide x 3-11/16" HighGJF40A- -
SEM7840 LCN Electro Magnetic Door Holder
The SEM7840 LCN Electro Magnetic Door Holder features a metal die cast housing that is surface wall mounted. Tri-voltage design works with 12, 24 or 120 volts, with 35 lbs. of holding force. The magnet housing measures 2-13/16" wide by 4-5/8" high. The armature (door mount part) is 1-11/16" wide by 2-3/8" high with a 1-7/8" diameter. The armature projects out 1-5/8". The total projection of both pieces is 2-5/8". Available in an aluminum or dark bronze color. Armature extensions are available, along with replacement covers, magnets, and armatures. Outlet box not included
LCN Part # SEM7840
SEM7840- -
Finger Protector For Doors - Interior Pull Side
Door Finger Protector - Interior Pull Side
These patented door guards fold against the jamb, allowing them to swing completely 180 degrees. The guard is attached to the face of the door and frame with the provided strong adhesive tape. Clear-frosted color to compliment any color scheme. Finger-Gard for use on Interior Doors, on the pull side. Available in 54" or 78" lengths.
Part number GFG3 for 54" length, and GFG4 for the 78" length
GFG-B -
5" Kickdown Door Holder Grand Standard
5" Kickdown Door Holder Grand Standard
Frequently we are asked, “What is the heaviest duty kick down holder you sell?” The answer to that question is any of Grand Specialty door holders. These door stops are American made and simply the best out there. They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg. They are constructed of steel, and not cast like all of the other door holders made.
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
- No roll pin at pivot point
- Mallable with a pair of pliers
- Rubber shoe held on by a screw
- American Made
- Zinc plated steel
The bottom mounting screws holes would be 4-3/8" to the Floor when mounted.
made by Grand Specialties 605z 605b
GJ605- -
Handicap Door Pull 18
With the Handicap Door Pull 18 you are able to get a closed fist behind the pull, which makes it a great ADA Door Pull. Shipped with screws. Also known as a Single Arm Pull, Handicap Grip, ADA Door Pull or Handle. The handle is constructed of cast aluminum, or brass and then plated. The base plate measures 1-3/4" by 2-3/4", the handle projects our 3-1/2". Ships with #6 by 5/8" matching finish sheet metal screws.
GHP200- -
Bilco Barracuda DSO-PB for Out Swinging Doors with Panic Devices
The Barracuda DSO-PB is for use on Out Swinging 36" Doors with Exit Devices. It is constructed of heavy duty steel with a durable powder coated finish. The bar goes across the door frame and grabs the mounting cleat with an adjustable clamp. To secure the door, simply turn the handle until it is secured. They currently offer two models, one for jambs up to 5-3/4" and one for jambs greater than 5-3/4". This device ships with all of the hardware and a wall mounting rack for storage.
DSO-PB -
Ives FB61P Constant Latching Flush Bolt for Wood Doors
Ives FB61P Constant Latching Flush Bolt for Wood Doors
The Ives FB61P is used on the inactive leaf of wood fire doors. The latch remains extend until the active door is opened. When the active door is opened the latches retract, and extend when the active door is closed. The bodies measure 1” wide by 8-1/2” tall and 2” deep. The bolt throw is 3/4” with a 7/8” vertical adjustment, and has a 3/4” backset. This package comes with the top and bottom flush bolts with screws and strikes.
90 minute UL Rated.
Ives Part # FB61P
FB61P- -
SEM7850-828 Armature for LCN Electro Magnetic Door Holder
SEM7850-828 Armature for LCN Electro Magnetic Door Holder features a metal die cast construction armature. The armature (door mount part) is 1-11/16" wide by 2-3/8" high with a 1-7/8" diameter. The armature projects out 2-5/8". Available in an aluminum or dark bronze color. Armature extensions are available, along with replacement covers, magnets, and armatures.
LCN Part # SEM7850-828
SEM7850-828- -
Magnetic Door Stop/Holder
Magnet Door Stop
Hands-free magnetic door stop/holder. All you need to do is open the door and a strong maget will keep it open until you close it. Mounts horizontally or vertically. Includes fasteners plus 1 concrete and 3 hollow wall anchors.
Not for use on doors with spring hinges or door closers.
GDS100 -
Door Pull 25 3/4" Diameter
The Door Pull 25 is made of 3/4" round stock in either solid, Aluminum, Brass or Stainless Steel. The handle has a 2-3/8" projection from the door, and 1-5/8" clearance from the door to the back of the handle. It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Door Handle or Door Grip.
GHE25 -
LCN Sentronic Door Closer 4314ME
LCN Sentronic Door Closer 4310ME
Standard LCN Sentronic Door Closer 4310ME series closer shipped with a 24V or 120V cylinder (please specify) on a mounting plate, metal cover, Swing-Free arm, track, track roller, and wood and machine screw pack. See 4310ME Series pages 23 & 24 for options. Sized cylinders for interior doors to 4’0”. Functions as full rack and pinion door closer when hold-open is not engaged or current is interrupted with Swing-Free arm engaged. Handed for right or left swinging door. Concealed or exposed electrical connections. Built-in “On/Off” switch controls hold-open function. Swing-Free arm allows door to be moved without door closer resistance. Interfaces with fire alarm systems. LCN Sentronic Door Closer 4310ME part are also available.
4310ME- -
Door Pull Handle 22
The Door Pull Handle 22 features an opened end and a closed end pull. This Door Pull is also known as a Door Handle or Door Grip. The dimensions are 14" overall length, 8" centers, with a 3/8" by 1-1/4" handle cross section. The mounting posts have a 1" diameter, and the handle projects out 1-7/8". The handle ships with thru bolts and finish washers. It is constructed of aluminum, stainless steel or brass depending on the finish you are looking for.
GHE22- -
International Door Closer 7301 Rim Device
International 7300 Rim Device
Modern flat touch bar Rim Panic exit device. This series offers durability, safety and meets the security demand and access control needs of today. Series 7300 Rim Panic exit devices are used with Narrow, Medium and Wide aluminum door and Hollow Metal and Wood Door applications. Series 7300 is non-handed, Field Reversible for LHRB or RHRB doors. Outside Unlatching and Dogging by Cylinder Key or Dogging by Hex Key in Touch Bar. Standard Units for 36” and 48” in widths (cut bar to fit). Can be used on 30” wide doors.
7301- -
LCN Sentronic Door Closer 4414ME
LCN Sentronic Door Closer 4414ME
Standard LCN Sentronic Door Closer 4410ME series closer shipped with a 24V or 120V cylinder (please specify) on a mounting plate, metal cover, regular arm, and wood and machine screw pack. Sized cylinders for interior doors to 4’0”. Functions as full rack and pinion door closer when hold-open is not engaged or current is interrupted. Handed for right or left swinging door. Concealed or exposed electrical connections. Built-in “On/Off” switch controls hold-open function. Interfaces with fire alarm systems.
LCN SENTRONIC DOOR CLOSER 4410ME parts are also available.
4410ME -
LCN 4040SE-3077T Sentronic Door Closer Arm
The LCN 4040SE-3077T Sentronic Door Closer Arm is only for use with the 4040SE. If you have another LCN Sentronic Model, we can special order the arm you need. For us to do that we would need to know which model you have (4110SE, 4010SE, ect..) and the hand of the door.
LCN Part # 4040SE-3077T
4040SE-3077T-