Search results for: 'rollers for spring door brush'
- Did you mean
- rollers for spring door brass 0
- roller for spring door brush 0
- Related search terms
- door series 30 push bar panic exit dev parts 1306
- door series 30 push bar panic exit dor parts 1311
- door series 30 push bar panic exit dog parts 1308
- door series push bar panic exit dor cal parts 1308
- door series 30 pull bar panic exit dor parts 1310
- door series 30 push bar panic exit deep parts 1310
- door series 30 push bar panic exit detex parts 1307
- door series 30 push bar panic exit drop parts 1307
- door series 30 pull bar panic exit dead parts 1306
- dooramatic door series 30 push bar panic exit devic parts 1315
-
Monarch Lever Trim Spring 4841
Monarch Trim Spring 4841
2-1/2" long x 3/16" diameter
Monarch part # 4841
G4841 -
Brushed Bronze Door Kick Plate-6 x 28 inches
Brushed Bronze Kick Plate US10 (Bronze), also know as 612
Solid bronze plate with in a brushed finish, and is then clear coated.
16 Ga (.050") ThickThis finish was really popular in the 1940 thru the early 1970's. It is an orangish hue brass color.
Custom sizes available starting around $0.27 per square inch depending quantity
Kick Plates come pre drilled with screws.
Please allow 2 week shipping time
GKP628-US10 -
Brushed Bronze Door Kick Plate-8 x 28 inches
Brushed Bronze Kick Plate US10 (Bronze), also know as 612
Solid bronze plate with in a brushed finish, and is then clear coated.
16 Ga (.050") ThickThis finish was really popular in the 1940 thru the early 1970's. It is an orangish hue brass color.
Custom sizes available starting around $0.27 per square inch depending quantity
Kick Plates come pre drilled with screws.
Please allow 2 week shipping time
GKP828b-US10 -
Brushed Bronze Door Kick Plate-8 x 30 inches
Brushed Bronze Kick Plate US10 (Bronze), also know as 612
Solid bronze plate with in a brushed finish, and is then clear coated.
16 Ga (.050") ThickThis finish was really popular in the 1940 thru the early 1970's. It is an orangish hue brass color.
Custom sizes available starting around $0.27 per square inch depending quantity
Kick Plates come pre drilled with screws.
Please allow 2 week shipping time
GKP830b-US10 -
Push Bar Adjustable 450
Push Bar Adjustable 450
Finishes:
US3/605 Polished brass
US4/606 Brushed brass
US10B/613 Dark bronze
US26/625 polished chrome
US26D/626 brushed chromeMaterial: Brass
Material Size: 5/8" Rd Tube Adjustable up to 36"
Clearance: 1/2"
Projection: 1-1/8"
Fasteners: Surface Mount only450- -
Brushed Stainless Steel Door Kick Plate 16 Gauge .050
The Brushed Stainless Steel Door Kick Plate 16 Gauge .050 is the most popular. Stainless steel offers one of the best material for commercial applications. They are very hard, and do not dent easily. The also offer the best corrosion resistances out there. We use type 304 stainless
Stainless Steel Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.23 per square inch depending quantity
Please allow 1 week shipping time
GKP-ss-16 -
Dor-o-Matic 1690/1790/2390 Dogging Spring PB323
Dor-o-Matic 1690, 1790 and 2390 Dogging Spring
Doromatic part # 971493-76 or PB323
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts Breakdown
Falcon / Dor-o-Matic 2390 Parts Break DownGPB323 -
Dor-o-Matic 1490/1590 Compression Spring PB224
Dor-o-Matic 1490/1590 Dogging Compression Spring
Doromatic part # 4299101020 or PB224
GPB224 -
Norton Door Closer 1601BF Barrier Free
The Norton Door Closer 1601BF Barrier Free has been around for about 10 years. With the advent of aluminum framed glass doors, Norton was one of the first manufactures to come up with a narrow stile door closer. Because of this, it is still one of the most popular door closer models out there. It is a Grade 1 closer and has adjustable closing, latching, and back check speeds. The Barrier Free version just means you can turn the spring tension down to a size 1 spring, which will meet the ADA codes (less than 5 pounds of resistance). The model we ship also has adjustable spring tension to work on a wider range of doors. The hole spacing is 3/4” x 9-1/16”.
1600BF- -
Norton Door Closer 8501
The Norton Door Closer 8501 is sometimes called the Omni Door Closer. This door closer features a cast aluminum body, is a Grade 1 closer and has adjustable closing, latching, and back check speeds. This closer is a non sized closer, meaning you adjust the spring tension to meet closing requirement for a ADA Barrier Free application all the way up to a 48” exterior door. You cover might have 8501/8501BF 3501/3501BF, but the new version will cover the BF and non BF closers. The difference between this closer and the 8301 is the size of the plastic cover. The 8301 has a slim cover, and the 8501 has full cover. The hole spacing on this door closer is 3/4” x 12”.
8501- -
Wall Door Holder/Stop 531
The Wall Door Holder/Stop 531 features cast brass or bronze finish which is then plated to the desired finish. This is considered a manually operated door holder, because it does not latch automatically. It features a 2-1/2" base with 3-5/8" projection, and ships complete with all of the needed fasteners.
GJ531- -
Cal Royal Products 300 Series Door Closer | 300-PCOV
The Cal Royal Products 300 Series Door Closer comes in two versions. One version is the size 3 to 6 spring, which would be for larger exterior doors. The 3 to 6 spring size is for doors 36" to 48" wide. The second version is the size 1 to 4 spring size. The 1 to 4 is considered a Barrier Free door closer, because the spring tension can be turned down to less than 8 pounds of resistance, making the door easy to open. The 1 to 4 should be used on interior doors and smaller, less than 36" wide exterior doors. This door closer is a standard template closer with a hole spacing of 3/4" x 9-1/16" center to center, which is what we find on many aluminum framed glass storefront doors. This closer has a 5 year warranty and is considered a Grade 1 closer, the heaviest duty rating possible.
300P- -
Von Duprin Strike 264
The Von Duprin Strike 264 measures 2-7/8" tall by 1-1/4" wide with a roller projection of 9/16". Used on the Von Duprin 22, 88, 98 and 99 when a lower profile strike is need in place of the Von Duprin 299 Strike. The hole spacing is 2-1/8" on center, and it ships with mounting screws and a shim. Also known as a Von Duprin Surface Roller Strike.
Von Duprin Part # 264
264 -
BB83 Full Surface 4-1/2" Door Hinge-3 per box
The BB83 Full Surface 4-1/2” Door Hinge is a specialty hinge. The hinge fastens to the face of the door and the face or the door frame. These are five knuckle, two bearing with square edges. They are constructed of 10 gauge (.134”) steel that is then plated to the desired finish. We ship in boxes of 3 hinges with the wood and machine screw.
G80045- -
Norton Door Closer 8301
The Norton Door Closer 8301 is sometimes called the Omni Door Closer. This door closer features a cast aluminum body, is a Grade 1 closer and has adjustable closing, latching, and back check speeds. This closer is a non sized closer, meaning you adjust the spring tension to meet closing requirement for a ADA Barrier Free application all the way up to a 48” exterior door. You cover might have 8301/8301BF 3301/3301BF, but the new version will cover the BF and non BF closers. The difference between this closer and the 8501 is the size of the plastic cover. The 8301 has a slim cover, and the 8501 has full cover. The hole spacing on this door closer is 3/4” x 12”.
8301- -
Ives Dust Proof Strike DP1
Ives Dust Proof Strike DP1
• Designed for use with the bottom bolt of all flush bolts.
• Spring-loaded plunger returns to floor or threshold level anytime
flush bolt is retracted, eliminating need to clean standard
floor strikes.
• Strike hole is 3/4" Diameter and 1-1/8" DeepDP1 Face Plate: 1-7/16" Diameter
Body: 1-3/16" Diameter x 1-7/8" DeepDP1- -
Cal-Royal 9000 Series Lever Trim HDESC
Cal-Royal 9000 Series Lever Trim HDESC is for use on the 9800 and 9800 Exit Devices. The Trim has a clutch mechanism to prevent breaking and two heavy duty springs to prevent sagging. Escutcheon measures 2-5/8 inches wide by 10-5/8 inches long. The lever projects out 2-7/8 inches. Key locks or unlocks lever.
HDESC- -
Push Bar Adjustable 452
Push Bar Adjustable 452
Finishes:
US26/625 polished chrome
US26D/626 brushed chrome
US3/605 polished brass
US4/606 brushed brass
US5/609 antique brass
US10/612 brushed bronze
US10B/613 dark bronzeMaterial: Brass
Material Size: 5/8" round tube adjustable to 36"
Base: 5/8" x 8-1/2"
Clearance: 1/2"
Projection: 1-1/8"452- -
Full Mortise Heavy Duty Hinge
The Full Mortise Heavy Duty Hinges are standard butt hinge. They are designed for heavy weight doors with a high frequency of usage. These are ideal for exterior doors in schools, hospitals and other commercial venues. The hinge offers four bearings, one between each leaf of the knuckle. They are constructed of 7 gauge (.180”) steel that is then plated or paint primed. We sell them in boxes of 3 hinges, and they ship with machine and wood screws.
Shown in brushed chrome
G300XX