Search results for: 'fire door parts american device h 1654'
-
Sargent Door Closer Hold Open Arm 25-H
The Sargent Door Closer Hold Open Arm 25-H is known as a Friction Hold Open Arm. As the arm rotates it tightens the two plates together until they can not turn any more, and holding the door open. To close you just pull the door and it will "unscrew". The hold open position is adjustable by tightening or loosening the larger nut.
Sargent part # 25-H
350HOA- -
Von Duprin 050390 Bottom Mullion Fitting
The Von Duprin 050390 Bottom Mullion Fitting is the Bottom Fitting for the 1654, 4754, 4854, and 4954 Von Duprin Mullions. The 050390 measures 5/8" thick by 2" wide and 3" long excluding the flange the projects out the one end. We find the number 961040-70 ESE cast right in the fitting. The mounting holes are 2-1/4" on center. Mounting Screws included.
Von Duprin Part # 050390
G050390- -
Cal Royal Panic Device 2000 Series Lever Trim
Cal Royal 2000 Series Exit Device Lever Trim
Non-handed Grade 1 (Clutch Style)
Cylindrical body hardened steel heavy duty tailpiece. For
1¾” and 2 ¼” doors. Prefix THI before part # for 2 ¼” door
thickness. Available for fire and non fire rated rim and
vertical rod exit devices.
Rose diameter 3 ½”, lever length 4 ¾”.ENTOOL- -
Falcon 650375 F-19-V/F24-V/F25-V/FXX-V Fire Rated Top Latch
The Falcon/Monarch Fire Rated Top Latch is used on the F-19-V, F-24-V, F-25-V, F-18-V and F-XX-V Surface Vertical Rods. The new number from Falcon is 650375, the old Monarch Number was F588. This latch is used on the above devices that are Fire Rated, meaning you can not dog these device in the Unlock Position. If your device has the ability to be dogged open, then use the G588 Non Fire Rated Version
GF588 -
Sargent 281 Door Closer
The Sargent 281 Door Closer is also known as the Powerglide, This closers meets ADA requirements, meets the Buy American Act, and is certified Grade 1, the heaviest rating possible. The closer has the capability to be mounted on the push, pull or top jamb, and is non handed. This closer is the replacement for the 1250 and 1251 series closers. This closer has been the replacement for the 1250 since about 2000. It is manufactured of an aluminum alloy.
Replaces the older Sargent 1250 and 1251 door closers, mounting holes will match
281- -
International Door Closer 8610S Rim Device-Grade 1
International 8610S Rim Device-Grade 1
DC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.
Non handed, 4-1/2" minimum stile width. Smooth Surface.
8610S- -
Cal Royal Panic Device 7700 Rim Device
Cal Royal 7700 Rim Exit Device
For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement. ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs. Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing. Trims are thru bolted for additional security. Conforms & Meets ADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1777 codes. UL Listed for Fire Exit Hardware. Uncompromising security and safety in single and double fire exit doors. Chassis mounted unit construction. Rim and vertical rod devices are non-handed and easily reversible. Available in many different functions. Lever and escutcheon trims are grade 1 construction with clutch free-wheeling mechanism. Rose and escutcheon covers 161 cut out.
Templating matches the Von Dupin 99 and 98
CR7700EO- -
Von Duprin 8827-F Top Latch Cover Kit 050465
The Von Duprin 8827-F Top Latch Cover Kit 050465 the Top Latch Cover for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted position.
Von Duprin Part # 050465
Old Part # 96120688VR30F -
Von Duprin Panic Device Keyed Mullion Retrofit Kit KR54
The Von Duprin Panic Device Keyed Mullion Retrofit Kit KR54 is used to convert the 1654 and 4954. Keyed Removable Steel Mullions makes removal faster and easier by a single operation of the mortise cylinder. Once mullion is removed, large equipment or furniture can freely pass through the opening. The unit will self lock when re-installed, without use of the cylinder key. Uses a 1-1/4´´mortise cylinder with a straight cam (Schlage cam reference B502-191). Cylinders are sold separately.
Von Duprin Part # 050168
KR54 -
LCN 1450 Rw/PA Door Closer-New
This new LCN 1450 Rw/PA Door Closer is a direct replacement for the Norton 8000,Yale 3000, and Falcon/Dor-o-Matic SC80 Series Door Closers, or any door closer that has the 3/4" x 12" hole spacing. It features, a cast aluminum cylinder, 25 year warranty, powder coated finishes, and stick on mounting template. This door closer comes with the ability to mount on the push, pull or top jamb and is non handed. The door closer meets Grade 1-ANSI A156.4, UL/cUL, ADA and the Buy American Act certifications.
Hole Spacing 3/4” x 12”
1450- -
Sargent Door Closer 351
The Sargent Door Closer 351 is the most heavy duty closer made by Sargent. This closers meets ADA requirements, meets the Buy American Act, and is certified Grade 1, the heaviest rating possible. The closer has the capability to be mounted on the push, pull or top jamb, and is non handed. It ships with arm, plastic cover, parallel arm bracket and all of the fasteners. The hole spacing is 2-1/2" x 9"
350- -
Von Duprin 8827-F Bottom Latch Kit 050463
Von Duprin 8827-F Bottom Latch Kit 050463 is the Bottom Latch Kit for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted position.
Von Duprin Part # 050463
Old Part # 10268188VR170F -
Yale 7100F Series Latch Assy 60-7000-0425-048
Yale 7100F Series Latch Assembly
This Yale Latch Assembly is used on fire rated panic devices. A fire rated panic is a device were you can not lock the latch in the open position. It is used on doors were the engineers want the door to latch every time it closes to contain a fire.
Yale Part # 60-7000-0425-048
Note the Hub Position of this latch is the 7100
G6070000425048 -
Von Duprin Panic Device 8827 Center Case 050415
The Von Duprin Panic Device 8827 Center Case 050415 is for use on the non fire rated 88 surface vertical rod. You can tell the difference by the dogging screw. If you have a Dogging Screw on your device, then this is the correct part. Includes the internal pieces, including the Rod Control.
Von Duprin part # 050415
88VR120- -
LCN 1250 Rw/PA Door Closer-New
The LCN 1250 Rw/PA Door Closer is a direct replacement for the Norton 1600, Yale 50, Falcon/Dor-o-Matic SC60, LCN 1260 and International 8050 Series Door Closers. It is ideal for low frequency and low abusive traffic areas, such as store front doors and interior doors. It features, a cast aluminum cylinder, 15 year warranty, powder coated finishes, and stick on mounting template. This door closer comes with the ability to mount on the push, pull or top jamb and is non handed. The door closer meets Grade 1-ANSI A156.4, UL/cUL, ADA and the Buy American Act certifications.
Hole Spacing 3/4” x 9-16”1250- -
5" Kickdown Door Holder Grand Standard
5" Kickdown Door Holder Grand Standard
Frequently we are asked, “What is the heaviest duty kick down holder you sell?” The answer to that question is any of Grand Specialty door holders. These door stops are American made and simply the best out there. They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg. They are constructed of steel, and not cast like all of the other door holders made.
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
- No roll pin at pivot point
- Mallable with a pair of pliers
- Rubber shoe held on by a screw
- American Made
- Zinc plated steel
The bottom mounting screws holes would be 4-3/8" to the Floor when mounted.
made by Grand Specialties 605z 605b
GJ605- -
Von Duprin 8827 Top Latch Case 050460
The Von Duprin 8827 Top Latch Case 050460 is for non fire rated doors. A non fire rated device is one that has to positively latch every time it closes, you can usually tell, because a non fire rated device has the hex key dogging. This is the part that may be causing your bottom latch to drag on the floor. The Top Latch does all the work on the Von Duprin 8827. When the Top Latch is retracted, it holds the rods in the retracted position.
Von Duprin part # 050460
Old Part # 10175088VR10 -
LCN Door Closer Fusible Link Arm 3049FL
LCN Door Closer Fusible Link Arm
Adjustable nut allows door closer arm to lock when the preselect position is reached. Fusible Link will hold door until heat melts the "Link" and then the door will shut. Used on Fire Doors to control a spreading fire.
Specify your current closers model number when ordering.
Not all of the LCN closers have the same shape spindle on the door closer
cylinder. The LCN Part #'s on this Fusible Link Arm is: 4010-3049FL, 4020-3049FL, 4110-3049FL3049FL -
Falcon 650233 24-R Center Case
Falcon 650233 / 650234 24-R Center Case
Replacement Center Case for the Monarch-Falcon 24-R Narrow Stile Rim Device. This Center Case is for use on both the Fire Rated and Non Fire Rated devices. This was changed in the summer of 2018. The 650233 has been replaced by the 650234, which was the Fire Rated version part number.
Falcon Part # 650233 / 650234
G24R15 -
International Door Closer 8630S SVR Device-Grade 1
International 8630S Surface Vertical Rod Device-Grade 1
DC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.
Non handed, 4-1/2" minimum stile width. Smooth Surface.
For doors 29" to 36" wide order the Size 30 to 36"
For doors 36" to 48" wide order the Size 48"8630S- -
4" Kickdown Door Holder Grand Standard
4" Kickdown Door Holder Grand Standard
Frequently we are asked, “What is the heaviest duty kick down holder you sell?” The answer to that question is any of Grand Specialty door holders. These door stops are American made and simply the best out there. They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg. They are constructed of steel, and not cast like all of the other door holders made.
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
- No roll pin at pivot point
- Mallable with a pair of pliers
- Rubber shoe held on by a screw
- American Made
- Zinc plated steel
The bottom mounting screws holes would be 3-3/8" to the Floor when mounted.
GJ604- -
Von Duprin EL99 Panic Device Only
This is the same trusted Von Duprin 99 with Electric Latch Retraction, also known as EL.
The EL feature allows for the remote unlatching of exit devices. A control station operator can flip a switch to retract the latch bolt and immediately change an exit door to push-pull operation. A powerful, continuous duty solenoid retracts the latch bolt, either for momentary unlatching, or for extended periods of time. The EL feature is an alternative to manual dogging.
EL devices are also useful with automatic door operators, and may be applied to fire-rated applications when under the control of an automatic fire alarm system.
UL approved for Class II circuit applications.
The EL option does not include the power transfer from door to frame, the power supply, or the control operator. Refer to EPT-2 power transfer and the PS914 power supply.
The PS914 with the 9002RS option card is the minimum option card required. Other option cards available for other functions, see PS914 power supply for additional information.
Ships with all the mounting screws and the 299 Strike.
EL99EO-Cal Royal Panic Device 7760 Surface Vertical Rod
Cal Royal 7760 Surface Vertical Rod Exit Device
For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement. ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs. Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing. Trims are thru bolted for additional security. Conforms & Meets ADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1777 codes. UL Listed for Fire Exit Hardware.
Templating matches the Von Dupin 99 and 98
CR7760EOLCN 4050 Rw/PA Door Closer-New
The LCN 4050 Rw/PA Door Closer is a newer Closer and is a direct replacement for the Norton 7500, Yale 4400, and Falcon/Dor-o-Matic SC70 Series Door Closers. It features, a cast aluminum cylinder, 25 year warranty, powder coated finishes, and stick on mounting template. This door closer comes with the ability to mount on the push, pull or top jamb and is non handed. The door closer meets Grade 1-ANSI A156.4, UL/cUL, ADA and the Buy American Act certifications.
Hole Spacing: 2-3/8” x 6-3/4”
4050-Corbin Russwin 650F35-8 ED5200 Active Head
Corbin Russwin ED5200 Active Head
Used on the Corbin Russwin ED5000 Rim Devices, for non fire rated doors. For fire rated doors, order the G650F36-8. A non fire rated door is a door were you can use your allen wrench to dog, or lock, the door in the open position during business hours.
Corbin Russwin part # 650F35-8
Rim Cylinder Hub Position for the ED5200
G650F35-8Yale 7100 Series Latch Assy 60-7000-0419-048
Yale 7100 Series Latch Assembly
This latch assembly is used on non fire rated doors, meaning panic devices that you can not dog open with the allen key or key cylinder. Non fire rated doors are usually exterior doors.
Yale Part # 60-7000-0419-048
Note the position of the Hub for this Assembly is the 7100
G6070000419048Von Duprin 8827-F Top Latch Kit 050462
The Von Duprin 8827-F Top Latch Kit 050462 is the Top Latch Kit for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted postion.
Von Duprin Part # 050462
Old Part # 10267688VR10FCorbin Russwin 650F37-8 ED4200 Active Head
Corbin Russwin ED4200 Active Head
Used on the Corbin Russwin ED4000 Rim Devices, for non fire rated doors. A non fire rated door is a door were you can use your allen wrench to dog, or lock, the door in the open position during business hours.
Corbin Russwin part # 650F37-8
The Hub Position for the ED4200
G650F37Adams Rite 8800 Panic Device
Adams Rite 8800 Panic Device
The 8800 features the Starwheel locking bolt that interlocks door to the door frame. The 36" version is in stock, we can also get the 30", 42" and 48" devices, lead time is 2-3 weeks. This device is used exclusively on aluminum framed glass storefront doors. Replacement parts are available.
8800EO-