Manufacturers
-
Norton 7705 PTO PowerTrack Only
The Norton PTO PowerTrack for 7705 is a replacement piece for the 7705PTO Door Closer. The Track includes the Slider, Soleniod and new mounting screws. The Track measures 21-1/4" long with a hole spacing of 19" on centers. The PTO Track is for the Pull Side of the door, also known as the Hinge Side because you can see the hinges on that side. On the PTO Track Assembly you can see the Two Mounting Holes
Norton Part # PTO24 or PTO120
PTO24-- -
Norton P7705 PPTO PowerTrack Only
The Norton PPTO PowerTrack for P7705 is a replacement piece for the P7705PTO Door Closer. The Track includes the Slider, Soleniod and new mounting screws. The PPTO Track is for the Push Side of the door, also known as the Stop Side because the track mounts on the jamb stop.
Norton Part # PPTO24 or PPTO120
PPTO24-- -
Sargent Door Closer 1331
The Sargent Door Closer 1331 is a standard template closer with the 3/4” x 12” hole spacing. This closer is a great replacement for the Norton 8000 Series or Yale 3000 Series Door Closers. The closer is constructed of a cast aluminum body and has a heat treated steel pinion and rack. The 1331 has the ability to be mounted on the push, pull or top jamb, and is non handed. We stock the aluminum finish, but also have the dark bronze finish, it just might take an extra day or so. We ship the 1331-JUO.
1330- -
Sargent Door Closer 1431
The Sargent Door Closer 1431 is also known as the Powerglide. This closer meets ADA requirements and has a capability to be mounted on the push, pull or top jamb, and is non handed. This closer can be used as a direct replacement for the older version 1230 or 1231 Sargent Closers without having to re drill the mounting holes. This closer has been the replacement for the 1230 since about 2000. It is manufactured of an aluminum alloy.
Retrofits existing SARGENT 1230/1231 Series Closer installations
1430- -
Sargent 281 Door Closer
The Sargent 281 Door Closer is also known as the Powerglide, This closers meets ADA requirements, meets the Buy American Act, and is certified Grade 1, the heaviest rating possible. The closer has the capability to be mounted on the push, pull or top jamb, and is non handed. This closer is the replacement for the 1250 and 1251 series closers. This closer has been the replacement for the 1250 since about 2000. It is manufactured of an aluminum alloy.
Replaces the older Sargent 1250 and 1251 door closers, mounting holes will match
281- -
Sargent Door Closer 351
The Sargent Door Closer 351 is the most heavy duty closer made by Sargent. This closers meets ADA requirements, meets the Buy American Act, and is certified Grade 1, the heaviest rating possible. The closer has the capability to be mounted on the push, pull or top jamb, and is non handed. It ships with arm, plastic cover, parallel arm bracket and all of the fasteners. The hole spacing is 2-1/2" x 9"
350- -
Sargent Door Closer Hold Open Arm 25-H
The Sargent Door Closer Hold Open Arm 25-H is known as a Friction Hold Open Arm. As the arm rotates it tightens the two plates together until they can not turn any more, and holding the door open. To close you just pull the door and it will "unscrew". The hold open position is adjustable by tightening or loosening the larger nut.
Sargent part # 25-H
350HOA- -
Sargent Parallel Arm Bracket 125-P
The Sargent Parallel Arm Bracket 125-P is for use with the 25-O regular arm, to convert it to a parallel arm mount. A parallel arm mount is when the door closer is mounted on the push side of the door and the arm is parallel to the door when in the closed position.
Sargent part # 125-P9
350PAB- -
Sargent Regular Arm 25-O
The Sargent Regular Arm 25-O is now used on all of there commercial grade closers. This is the standard arm shipped with about 90 percent of there closers. This arm is for use with the 350, 1430, and 281 closers, and will work on the 1230 and 1250 models also.
Sargent Part # 25-0
350RA- -
Yale 2300 Door Closer-Discontinued
Yale 2300 Door Closer
- Spring size 2, 3, 4, 5
- Separate and independent valve for sweep speed and latch speed
- Adjustable backcheck standard
- Regular, top jamb, parallel mount
- 5-year limited warranty
- ANSI/BHMA A156.4 Grade 3
3/4" x 9-1/16" hole spacing
In April of 2023 Norton Yale have discontinued the 2300 and 9300. The Norton 1600 will be sent in place of the 2300. Same Hole Spacing, but adjustable spring tension.
2300- -
Yale Door Closer 3301
The Yale Door Closer 3301 is constructed of a cast aluminum alloy. It is considered a Grade 1 Closer, which is the highest grade possible. The closer features an adjustable spring tension, and separate closing, latching and back check intensity valves. The slim line plastic cover is standard on this closer. This door closer replaces the older 3301BF closers. The new version is Barrier Free Complaint. The hole spacing is 3/4" x 12", the cylinder is sometimes cast 20-3301-1001 on the back of the cast aluminum cylinder. This closer ships with all of the mounting hardware and parallel arm bracket.
3300- -
Yale Door Closer 3501
The Yale Door Closer 3501 is constructed of a cast aluminum alloy. It is considered a Grade 1 Closer, which is the highest grade possible. The closer features an adjustable spring tension, and separate closing, latching and back check intensity valves. The full plastic cover is standard on this closer. This door closer replaces the older 3501BF closers. The new version is Barrier Free Complaint. The hole spacing is 3/4" x 12", the cylinder is sometimes cast 20-3301-1001 on the back of the cast aluminum cylinder. This closer ships with all of the mounting hardware and parallel arm bracket.
3500- -
Yale Door Closer 4400
The Yale Door Closer 4400 has been around for quite a long time, and was designed to replace the older 400, which are still made. The beauty of the 4400 is that is can be mounted left or right, push, pull or top jamb, were as the 4200 you had to specify all those attributes, which made stocking them a head ache. This is a Grade 1 closer, and is extremely durable. If you are looking for a 4400BF, the barrier free version, the new 4400 is barrier free, and will do the trick. This closer has a 2-3/8" x 6-3/4" hole spacing.
4400- -
Yale Door Closer 51 Series
The Yale Door Closer 51 Series has been around since the early 1970's. With the advent of the aluminum framed storefront doors, this door closer was a perfect fit. The 50 series is a non-sized, non-handed closer that can be mounted on the push (parallel arm), pull (regular arm) or top jamb. A Grade 1 closer certification, means it is one of the more heavy duty closers out there. Older models may be stamped with Scoville or Eaton, which are the companies that used to own Yale. We some times find 20-0054-4001 or 20-0254-4001 stamped on the back of the closer. Ships with all mounting screws and a parallel arm bracket. The hole spacing is 3/4" by 9-1/16".
50- -
Yale Replacement Covers
One of the problems out in industry today is vandalism. These Yale Replacement Covers will replace your existing cracked and broken covers. The covers are available for the 4400, 3300, and 3500 models. They are made of impact resistance plastic. The cover shown is for the 4400, in the aluminum finish.
yale-covers -
Dorma 8900 Door Closer Series
The heavy-duty 8900 Series non-handed surface applied closer
with adjustable spring power and backcheck positioning adjustment.
The 8900 has intensity adjustable hydraulic backcheck
that will take effect at approximately 65º. The 8900 has two
independent, noncritical adjustment valves to control sweep and
latch closing speeds. The backcheck positioning valve maintains
an effective backcheck range on parallel arm applications. The
8916 will be available with field adjustable spring power from size
1 to 6 for barrier-free requirements.2-1/8" x 5" hole spacing
8900- -
International 8600 Series End Cap
The International 8600 Series End Cap is used on the hinge side of the the exit device. This cap includes the mounting bracket and the mounting screws. It is constructed of a die cast metal for years of service. The piece measures 2-3/8" by 2-1/4" by 1-1/2". This end cap is used on the International Door Closer models, 8510S, 8610S, 8710S, 8810S, 8620S, 8530S, and 8650S devices, along with the same devices ending in F.
INT8600EC- -
LCN 159 Arm Screw
The LCN 159 Arm Screw is used on all of the LCN Closers to hold the arm on the Spindle of the Cylinder. This screw goes by the number 4040-159, 4110-159, 4020-159, 1260-159, 1260-159, 4040-159 and 4040SE-159. This is the screw that holds the arm on to the Door Closer Spindle (Shaft). The screw has a 3/4" diameter head, 1/2" high with a 1/4" diameter shaft with 20 threads per inch (1/4-20 screw).
4040SE-159 -
LCN 1370 Quick Fix Plate
The LCN 1370 was a door closer made in the late 1990's to 2006 or so. The closer had a special mounting plate that made installation very quick. Many people have this door closer in use and now they are starting to fail. The LCN 1370-18QF Quick Fix Plate converts the mounting holes of the 1370 to a standard template closer, which is 3/4" x 9-1/16". By using this plate you will not have to redrill holes in your door. The plate measures 2 by 10-1/4 inches with tapped holes that measure 3/4 x 9-1/16 inch.
1260-18QF- -
Falcon / Doromatic Door Closer SC91
The Falcon / Doromatic Door Closer SC91 is an affordable, high quality closer for residential or light commercial applications. They used to be know as the Doromatic SC90, but in about 2008, they changed it to the Falcon SC91. This closer offers adjustable closing, latching and back check speeds, along with adjustable spring tension. It has the ability to be mounted on the push, pull or top jamb and is non handed. This closer is considered a Grade 3 closer, which is the lightest grade you can get. The hole spacing is 3/4” x 6-3/8”. We ship the SC91 Rw/PA.
SC90- -
Falcon / Doromatic Door Closer SC61
The Falcon / Doromatic Door Closer SC61 is an affordable, higher quality, standard template closer. This closer offers adjustable closing, latching and back check speeds, along with adjustable spring tension. It has the ability to be mounted on the push, pull or top jamb and is non handed. This closer is considered a Grade 1 closer, which is the highest grade you can get. The hole spacing is 3/4” x 9-1/16”, which is the most common mounting template out in industry today. They used to be know as the Doromatic SC60, but in about 2008, they changed it to the Falcon SC61. We ship the SC61 Rw/PA.
SC60-