Burns Manufacturing
-
Anodized Black Aluminum Door Kick Plate 315AN
The Anodized Black Aluminum Door Kick Plate 315AN are a flat black and match the black color we find on Storefront doors. These plates have an aluminum base metal, which is 18 gauge (.040") thick that is then Anodized in the Black Color. These plates relatively inexpensive. Custom sizes are available, they run about $0.25 per square inch.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. This is fine on the Brass and Aluminum base metals, but again Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
GKP-BLK -
Black Anodized Aluminum Kick Plate-6 x 28 inches
The Black Anodized Aluminum Kick Plate-6 x 28 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP628BLK -
Black Anodized Aluminum Kick Plate-6 x 30 inches
The Black Anodized Aluminum Kick Plate-6 x 30 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP630BLK -
Black Anodized Aluminum Kick Plate-6 x 32 inches
The Black Anodized Aluminum Kick Plate-6 x 32 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP632BLK -
Black Anodized Aluminum Kick Plate-6 x 34 inches
The Black Anodized Aluminum Kick Plate-6 x 34 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP634BLK -
Black Anodized Aluminum Kick Plate-8 x 28 inches
The Black Anodized Aluminum Kick Plate-8 x 28 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP828BLK -
Black Anodized Aluminum Kick Plate-8 x 30 inches
The Black Anodized Aluminum Kick Plate-8 x 30 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP830BLK -
Black Anodized Aluminum Kick Plate-8 x 32 inches
The Black Anodized Aluminum Kick Plate-8 x 32 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP832BLK -
Black Anodized Aluminum Kick Plate-8 x 34 inches
The Black Anodized Aluminum Kick Plate-8 x 34 inches are 18 gauge (.040”) thick. The finish is a brushed flat black. The edges of this plate will be the aluminum color because of how they are cut.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8" Oval Phillips Undercut matching color screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10" will have 10 holes for plates up to 33" and 12 holes for plates between 33 and 40".
Please allow for a 1 week lead time. Custom sizes are available, and run about $0.15 per square inch.
GKP834BLK -
Diamond Plate .125 Aluminum Door Kick Plate
The Diamond Plate Aluminum Door Kick Plate are solid aluminum. They are 1/8" thick and have a gloss or polished finish. These plates have the Diamond pattern, and the diamonds are 1-1/8" long. Custom sizes are available, they run about $0.39 per square inch. The lead time on these plates is about 7-10 days.
GKP-DP -
Aluminum Diamond .125 Plate Kick Plate-6 x 28 inches
Aluminum Diamond Plate Kick Plate
Aluminum base material that has a polished chrome look with the diamond plate pattern. Diamonds are 1-1/8" long.
Custom sizes are available, they run about $0.22 per square inch.125" thick
Please allow 7-10 days for delivery
GKP628DP -
Aluminum Diamond .125 Plate Kick Plate-6 x 30 inches
Aluminum Diamond Plate Kick Plate
Aluminum base material that has a polished chrome look with the diamond plate pattern. Diamonds are 1-1/8" long.
Custom sizes are available, they run about $0.22 per square inch.125" thick
Please allow 7-10 days for delivery
GKP630DP -
Aluminum Diamond .125 Plate Kick Plate-6 x 32 inches
Aluminum Diamond Plate Kick Plate
Aluminum base material that has a polished chrome look with the diamond plate pattern. Diamonds are 1-1/8" long.
Custom sizes are available, they run about $0.22 per square inch.125" thick
Please allow 7-10 days for delivery
GKP632DP -
Aluminum Diamond .125 Plate Kick Plate-6 x 34 inches
Aluminum Diamond Plate Kick Plate
Aluminum base material that has a polished chrome look with the diamond plate pattern. Diamonds are 1-1/8" long.
Custom sizes are available, they run about $0.22 per square inch.125" thick
Please allow 7-10 days for delivery
GKP634DP -
Aluminum Diamond .125 Plate Kick Plate-8 x 28 inches
Aluminum Diamond Plate Kick Plate
Aluminum base material that has a polished chrome look with the diamond plate pattern. Diamonds are 1-1/8" long.
Custom sizes are available, they run about $0.22 per square inch.125" thick
Please allow 7-10 days for delivery
GKP828DP -
Aluminum Diamond .125 Plate Kick Plate-8 x 30 inches
Aluminum Diamond Plate Kick Plate
Aluminum base material that has a polished chrome look with the diamond plate pattern. Diamonds are 1-1/8" long.
Custom sizes are available, they run about $0.22 per square inch.125" thick
Please allow 7-10 days for delivery
GKP830DP -
Aluminum Diamond .125 Plate Kick Plate-8 x 32 inches
Aluminum Diamond Plate Kick Plate
Aluminum base material that has a polished chrome look with the diamond plate pattern. Diamonds are 1-1/8" long.
Custom sizes are available, they run about $0.22 per square inch.125" thick
Please allow 7-10 days for delivery
GKP832DP -
Aluminum Diamond .125 Plate Kick Plate-8 x 34 inches
Aluminum Diamond Plate Kick Plate
Aluminum base material that has a polished chrome look with the diamond plate pattern. Diamonds are 1-1/8" long.
Custom sizes are available, they run about $0.22 per square inch.125" thick
Please allow 7-10 days for delivery
GKP834DP -
Plunger Type Door Holder / Stop 583
The Plunger Type Door Holder / Stop 583 is constructed of solid cast brass, that is then plated to the desired finish. It measures 5-3/8" by 2-1/4" base with a 1-1/4" projection. The throw is 1-1/4". These are sometimes called pop-up or push down stops. This piece will ship with matching finish mounting screws.
GJ583- -
Concealed Mount Push and Pull Plate Sets
The Concealed Mount Push and Pull Plate Sets feature an 1/8 inch push plate with a 1/20 inch plate plate. The handle is surface mounted with thru mounted studs. 8 inch center handles are 3/4 inch diameter, 10 in and 12 inch center handles are 1 inch diameter.
G74X5325B -
C Shaped Offset Pull
The C Shaped Offset Pull has 12 inch centers and has a 13 inches overall lenght. The clearance is 1-1/2 inches with a 2-1/2 inch projections. The handle is constructed on 1 inch diameter stock, the offset is 7 inches. The base is 7/8 inch round stock. The handle is furnished with thru bolts and finish washers.
G49D- -
Hands-Free or Foot Door Pull BM46
The Hands-Free/Foot Door Pull BM46 can be used as a ADA compliant hands-free door pull when mounted 42" above the finished floor. Or as foot pull when mounted at the bottom of the door. The Pull is 4" x 5" and is made of .090 thick stainless steel. Ships with sex bolts and screws for 1-3/4" door. Available in Brushed Stainless Steel, Flat Black Powder Coat and Dark Bronze Powder Coat.
GBM46- -
Handicap ADA Hands-Free Door Pull BM4511
The Handicap ADA Hands-Free Door Pull BM4511 is an ADA compliant. You can hook your forearm/wrist into the open end to open a non-latching door. The pull is constructed of stainless steel and is available in brushed stainless steel, powder coated flat black or powder coated dark bronze. The plate measures 4 x 16 inches and the grip is tack-welded to the plate and also has a 5/16-18 thread for thru bolting. The grip is 1-1/4 diameter by 8 inches. Ships with 6 mounting screws and one 5/16-18 thru bolt with finished washer in matching finish.
GBM4511- -
Floor Door Stop / Holder 534
Automatic Floor Type Holder and Stop
A replacement holder and stop that has been around for many years. This style of Holder can be found in many of the schools, churches and hospitals that were built in the 1960's and 1970's. Cast brass construction, and then chrome plated. Measures 3-11/16" high by 3" wide with a 1-15/16" projection. The strike is 1-3/16" high. Spring loaded brass roller, rolls over the the strike to lock the door in the open position. To release, just give the door a tug. Designed for doors with a door to floor clearance of less than a 1/2".
GJ534- -
Corner Guards-Clear Plastic 313 - 2-1/2" X 2-1/2" X 48"
The Clear Plastic Corner Guards 313 are a good way to protect corners from hand carts and dollies in areas of lighter traffic. If the area has a lot of traffic, like a warehouse, I would recommend the 310 or 311 which are made of metal. The are 2-1/2" by 2-1/2"" and are usually 48" long, but we can do custom sizes. They are constructed of .120" thick clear polycarbonate plastic. Screws are included for mounting.
GCG313 -
Clear Plastic Corner Guards 312 - 2" X 2" X 48"
The Clear Plastic Corner Guards 312 are a good way to protect corners from hand carts and dollies. If the area has a lot of traffic, like a warehouse, I would recommend the 310 or 311 which are made of metal. The are 2" by 2" and are usually 48" long, but we can do custom sizes. They are constructed of .120" thick clear polycarbonate plastic. Screws are included for mounting.
GCG312