Von Duprin | Von Duprin Exit Devices
For the past 55 years, RBA Door has been a trusted seller of Von Duprin exit device hardware for repairs, restorations, and installations. We have the compatible exit device hardware by Von Duprin, whether it is for rim, vertical rod, or another style of device.
Do you have the economical 22 Series or the higher end 98/99 Series? If so, we have the Von Duprin exit device hardware you need. Our team can help you identify your device by series, handing, and function, and recommend the proper solution for your door opening. By sending us a photo and device details, our seasoned staff members can assist with your order to help you reduce downtime and avoid costly replacements. Place your order of exit device hardware by Von Duprin today or call us to speak with product experts for assistance!
The Von Duprin Brand
Von Duprin has been operating for more than a century. The company is a reputable brand creating reliable products such as Von Duprin exit device hardware. They are an Allegion group brand. At RBA Door, we have been happily selling their premium products for decades.
Our Selection of Panic Device Hardware by Von Duprin
We stock touch bars, trim, cylinder cams, end caps, spring stop assemblies, and other replacement parts to keep your doors working safely and smoothly. Our inventory includes Von Duprin exit device hardware for the Von Duprin 22 Series, 33 Series, 88 Series, 98 Series, and 99 Series devices. Many items that we carry are available for fast shipping and our team can assist with compatibility questions so you can order with confidence.
So here is what makes Von Duprin exit device hardware stand out from the rest. From schools and hospitals to offices and retail spaces, Von Duprin exit device hardware is proven to be built for reliable, code-compliant egress. Von Duprin exit device hardware is designed to fit properly, perform consistently, and hold up in high-traffic environments. Using the correct replacement hardware helps maintain smooth operation, reduce hazards, and support life-safety requirements.
We Can Help you Find the Right Von Duprin Panic Device Hardware!
Do you need assistance with identifying your device? You can always send us details like the series number, door width, handing, and trim type. If you are not sure which series or model you have, look for the model information on the device. We will help you match it to the correct Von Duprin exit device hardware so your door works the way it should.
When you are replacing a worn component or upgrading an entire door opening, we can help you find the right Von Duprin exit device hardware for your specific device and door setup. Our RBA Door support team can guide you through new installations, upgrades, and fast repairs by helping you order the most suitable exit device hardware by Von Duprin. Contact RBA Door today for pricing, availability, and knowledgeable assistance on the full range of Von Duprin exit device hardware.
-
Von Duprin 99 Push Bar Retrofit Kit-Pbkit
The Von Duprin 99 Push Bar Retrofit Kit-Pbkit updates your current version touch pad, to the newest version. Used on all the Von Duprin 33A, 35A, 99 and 98's. For doors 30" to 36" order the 36" size. If your door is 36" to 48" order the 48" size. The Push Bar is 18" wide on the 36" version. Please allow 1 week for delivery.
Von Duprin part # PBKIT
G99R35 -
Von Duprin 99 Rim Center Case 050020
The Von Duprin 99 Rim Center Case 050020 replaces all previous versions of the Von Duprin 98/99 Rim Device Center Cases. One of the best things about a Von Duprin is when they redesign a part, they make it so your old device is not obsolete and you can update your device. All internal parts, springs, screws and cover mounting bracket included.
Von Duprin Part # 050020
G99R15 -
Von Duprin 992/994 Lift Spring 971573
Von Duprin 992/994 Lever Lift Spring 971573
The spring measures 1-5/8" long with a 7/16" diameter. We find two of these springs per 992 and 994 series lever trims. These springs help support the lever handle and return it to the proper position.
Von Duprin Part # 971573-00
G971573 -
Von Duprin 9927 Bottom Latch 050090
The Von Duprin 9927 Bottom Latch 050090 replaces and updates all 9827 and 9927 bottom latches to the new style, if your device was installed before October 1998. If your device is newer then October 1998, then use the G050401. Mounting screws and bracket are included.
Von Duprin Part # 050090
G99VR55 -
Von Duprin 9927 Bottom Vertical Rod 110574
The Von Duprin 9927 Bottom Vertical Rod 110574 is the replacement rod for broken or bent vertical rods. All of the 9927 bottom rods are the same length, this is set by Federal Building Codes, so the center line of the Panic Hardware is a certain height from the finished floor. The length of the rod is 31-1/4" long, less the fittings. The old part number on this was 110574, and the newer one is 050514.
G99VR50- -
Von Duprin 9927 Rod Guide Assembly 112063
The Von Duprin 9927 Rod Guide Assembly 112063 works on all of the Von Duprin 98 and 9927's. The guide keeps the rods from bowing or getting bent by hand carts, or rowdy patrons. Replaces the old style which had the cover and springs.
Von Duprin part # 112063
G99VR35- -
Von Duprin 9927 Top Latch 050091
The Von Duprin 9927 Top Latch 050091 used on all the Von Duprin 9827 and 9927's. Replaces and updates all 9827 and 9927 bottom latches to the new style, if your device was installed before October 1998. If your device is newer then October 1998, then use the G050400. This is usually the problem if your bottom rod is dragging on the floor. Latch measures: 1-1/16" wide x 4-5/16" long (less latch bolt) x 1-7/8" projection at the highest point. Includes screws.
Von Duprin Part # 050091
G99VR10 -
Von Duprin 9927 Top Vertical Rod 110573
The Von Duprin 9927 Top Vertical Rod 110573 is the standard top rod for door heights up to 7'1". The length of this rod is 35", less the fittings. For larger doors you can order a Rod Extension Kit, which at this point we do not have online. The rod is field adjustable if your doors are less then 7'1". The Old Von Duprin part # is 110573, and the Newer Von Duprin part # is 050512.
G99VR30- -
Von Duprin 050538 EL Dogging Rod Retainer
Von Duprin 050538 EL Dogging Rod Retainer
Fitting threads into the 050536 HD EL Solenoid and connects to the Dogging Rod
5 On Diagram
NO LONGER MANUFACTURED
G050538 -
Von Duprin 050536 HD-EL Solenoid
Von Duprin 050536 HD-EL Solenoid
Electric Latch Retraction for Von Duprin Exit Devices with Hex Key Dogging. #4 on the diagram below large picture.
Von Duprin part # 050536
Old Part # was 110740No longer available, the only solution we have at this time is to upgrade to the HD-QEL Base Plate.
G050536 -
Von Duprin 050537 HD-EL Solenoid Plunger
Von Duprin 050537 HD-EL Solenoid Plunger
#5 On Diagram under "More Views". Measures 3" long x 7/8" diameter.
Works On The Von Duprin 33A/35A And 98/99 Exit Devices
No longer Available
G050537 -
Von Duprin 33/35/98/99 EL Dogging Rod 3' 050531
Von Duprin 050531 EL Dogging Rod 3'
The EL Dogging Rod connects the Solenoid to the Push Bar Bracket. The 3' designates the model it is used on. The 3' model is used on doors 36" or under. The Rod measures roughly 11" long. This rod is used on the 33A, 35A, 98 and 99 Exit Devices
Von Duprin Part # 050531, Old Part # 110007
No longer manufactured
G050531 -
Von Duprin 33/35/98/99 EL Dogging Rod 4' 050532
Von Duprin 050532 EL Dogging Rod 4'
The EL Dogging Rod connects the Solenoid to the Push Bar Bracket. The 4' designates the model it is used on. The 4' model is used on doors 48" down to 36". The Rod measures roughly 17" long. This rod is used on the 33A, 35A, 98 and 99 Exit Devices. Use part # G050531 if your door is equal or under 36".
Von Duprin Part # 050532, Old Part # 110008
G050532 -
Von Duprin 22, 33, And 99 Dogging Shaft 090040
The Von Duprin 22, 33, And 99 Dogging Shaft 090040 is the peice that the hex dogging key would fit into. The shaft is for a 5/32" dog key, but it has to be the long version. The shorter versions will not have enough reach to get all the way into the shaft. This is a very common problem area, the hole that the key fits in is only about 1/4" deep, and if you do not push down on the hex key when locking it open it will round out over time. To remove the shaft, just pull it straight out with a part of channel locks. We reinstalling the new one you might have to bend the ends of the adapter spring 090042 back down. This dogging shaft is for use on all Von Duprin Panic Exit Devices shipped after 1997.
G090040 -
Von Duprin 050390 Bottom Mullion Fitting
The Von Duprin 050390 Bottom Mullion Fitting is the Bottom Fitting for the 1654, 4754, 4854, and 4954 Von Duprin Mullions. The 050390 measures 5/8" thick by 2" wide and 3" long excluding the flange the projects out the one end. We find the number 961040-70 ESE cast right in the fitting. The mounting holes are 2-1/4" on center. Mounting Screws included.
Von Duprin Part # 050390
G050390- -
Von Duprin 6000 Series Solenoid Kit
The Von Duprin 6000 Series Solenoid Kit is used to replace burnt out solenoids on there 6000 series. To order determine the voltage and whether you have fail safe or fail secure.
Part # 050237 12 VDC (Fail Safe & Fail Secure)
Part # 050239 16 VDC (Fail Safe & Fail Secure)
Part # 050240 24 VDC (Fail Safe & Fail Secure)G0502xx
