Parts| Von Duprin Exit Devices
Von Duprin Exit Device Parts
Selling Von Duprin Exit Device Parts for the past 35 years
Parts in stock for the Von Duprin 22, 33, 55, 88, 98 and 99 Devices
Make sure you click on the Von Duprin Exit Device Part Image or Text for more
dimensional and pricing information.
-
Von Duprin 33/35/98/99 EL Dogging Rod 4' 050532
Von Duprin 050532 EL Dogging Rod 4'
The EL Dogging Rod connects the Solenoid to the Push Bar Bracket. The 4' designates the model it is used on. The 4' model is used on doors 48" down to 36". The Rod measures roughly 17" long. This rod is used on the 33A, 35A, 98 and 99 Exit Devices. Use part # G050531 if your door is equal or under 36".
Von Duprin Part # 050532, Old Part # 110008
G050532 -
Von Duprin 22, 33, And 99 Dogging Shaft 090040
The Von Duprin 22, 33, And 99 Dogging Shaft 090040 is the peice that the hex dogging key would fit into. The shaft is for a 5/32" dog key, but it has to be the long version. The shorter versions will not have enough reach to get all the way into the shaft. This is a very common problem area, the hole that the key fits in is only about 1/4" deep, and if you do not push down on the hex key when locking it open it will round out over time. To remove the shaft, just pull it straight out with a part of channel locks. We reinstalling the new one you might have to bend the ends of the adapter spring 090042 back down. This dogging shaft is for use on all Von Duprin Panic Exit Devices shipped after 1997.
G090040 -
Von Duprin 050390 Bottom Mullion Fitting
The Von Duprin 050390 Bottom Mullion Fitting is the Bottom Fitting for the 1654, 4754, 4854, and 4954 Von Duprin Mullions. The 050390 measures 5/8" thick by 2" wide and 3" long excluding the flange the projects out the one end. We find the number 961040-70 ESE cast right in the fitting. The mounting holes are 2-1/4" on center. Mounting Screws included.
Von Duprin Part # 050390
G050390- -
Von Duprin 6000 Series Solenoid Kit
The Von Duprin 6000 Series Solenoid Kit is used to replace burnt out solenoids on there 6000 series. To order determine the voltage and whether you have fail safe or fail secure.
Part # 050237 12 VDC (Fail Safe & Fail Secure)
Part # 050239 16 VDC (Fail Safe & Fail Secure)
Part # 050240 24 VDC (Fail Safe & Fail Secure)G0502xx