Search results for: 'fire door parts american device h 1690'
- Related search terms
- door series 30 push bar panic exit deg parts 1306
- door series 30 push bar panic exit dor parts 1311
- door series push bar panic exit dor cal parts 1307
- door series 30 pull bar panic exit dor parts 1310
- door series 30 push bar panic exit dent parts 1306
- door series 30 pull bar panic exit detex parts 1306
- door series 30 push bar panic exit drop parts 1307
- door series 30 pull bar panic exit deep parts 1308
- door o matic 1 panic device 1309
- dooramatic door series 30 push bar panic exit devic parts 1315
-
Dor-o-Matic 1690/1990 Top Rod-PB24
Dor-o-Matic 1690/1990 Top rod. Connects panic bar to the bottom latch
Doromatic Part # 4270100017 PB24
Select the height of your door for the correct rod.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199024T- -
Sargent Door Closer Hold Open Arm 25-H
The Sargent Door Closer Hold Open Arm 25-H is known as a Friction Hold Open Arm. As the arm rotates it tightens the two plates together until they can not turn any more, and holding the door open. To close you just pull the door and it will "unscrew". The hold open position is adjustable by tightening or loosening the larger nut.
Sargent part # 25-H
350HOA- -
Dor-o-Matic 1690 Panic Device
The design of the Doromatic 1690 is ideal for demanding, high-traffic applications. The vertical rods and latch mechanisms are concealed in the vertical door stile, ensuring trouble-free operation. Cast metal cover plates and end caps hold up to rigorous use. A quick, singlepoint dogging feature in the housing deactivates the device, permitting unrestricted traffic flow. The Doromatic 1690 may also be used to retrofit a Doromatic 1990 Series crossbar device.
Replacement parts are also available
Shipped with all screws and strikes. The 1690NL Cylinder Assembly (169CA) is required if you wish to use a key cylinder on the exterior, SEE RELATED PRODUCTS toward the bottom of the page.
1690EO -
Dor-O-Matic 1690/1790/1990/2090 Pinion PB5
The Dor-O-Matic 1690/1790/1990/2090 Pinion PB5 has been in use since the 1970's. This gear or pinion is what activates the latch or the rods on the 990, 1090, 1690, 1790, 1990 and 2090 devices. The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008. They are the same device, with the same parts, just a different name plate. The manufacture part number on this is CAM.102, PB5 or PB140.
G199005 -
Dor-o-Matic 1690/1990 Top Strike PB48
The Dor-o-Matic 1690/1990 Top Strike PB48 is used on the Dor-o-Matic 1690, 1990 and 2390 Concealed Vertical Rod Exit and Panic Devices. The plate measures 1" x 1-1/16" with 4 holes. The mounting holes are 11/16" x 11/16" on center. The diameter of the pin is 7/16" and projects out 5/32". Ships with mounting screws and 3 shim plates. The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008. They are basically the same device, with the same parts, just a different name plate. Falcon part # PB48.
Dor-o-Matic/Falcon 990/1990 Repair Parts Breakdown
Dor-o-Matic/Falcon 1690 Repair Parts BreakdownG199034 -
Dor-o-Matic 1490/1690/1990 Rod Latch Assembly PB129
Dor-o-Matic 1490/1690/1990 Rod Latch Assembly PB129
This latch is also used on the EL versions of the 1490 and 1690.
Doromatic RL Bottom Latch
Doromatic part # 4270100521
Dor-o-Matic/Falcon 990/1990 Repair Parts Breakdown
Dor-o-Matic/Falcon 1690 Repair Parts BreakdownG1990129 -
Cal Royal Panic Device 2000 Series Lever Trim
Cal Royal 2000 Series Exit Device Lever Trim
Non-handed Grade 1 (Clutch Style)
Cylindrical body hardened steel heavy duty tailpiece. For
1¾” and 2 ¼” doors. Prefix THI before part # for 2 ¼” door
thickness. Available for fire and non fire rated rim and
vertical rod exit devices.
Rose diameter 3 ½”, lever length 4 ¾”.ENTOOL- -
Dor-o-Matic 1690 Actuator Arm Brkt Assembly PB338
The Dor-o-Matic Falcon Actuator Arm Bracket Assembly is used on the 1690 and 2390 devices.
Doromatic part # BRKTASY.107 or PB338
Dor-o-Matic 1690 Repair Parts Breakdown
GPB338 -
Dor-O-Matic 1690/1790/2390 Dogging Assembly PBX-16
Dor-O-Matic 1690/1790/2390 Dogging Assembly PBX-16
Falcon Doromatic 1690, 1790, and 2390 replacement dogging assy. The dogging assembly is used to dog the door in the open position, so people can enter the building without having to unlatch the door for the inside or with a key on the outside. The KIT.1197 comes complete with mounting screws. Some of the earlier version where riveted into the rail, so you might need to drill out the rivets, the screws shipped with KIT.1197 have self tapping thread forming screws.
Doromatic part # KIT.1197
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts Breakdown
Falcon / Dor-o-Matic 2390 Parts Break DownGPBX16 -
Dor-o-Matic 1690 Screw PB316
Dor-o-Matic 1690 End Cap Screw
#8 x 1-1/2” FPHTC
Doromatic part # screw.1072 or PB316
Dor-o-Matic 1690 Repair Parts Breakdown
GPB316 -
Dor-o-Matic 1690 Pinion Support Bracket PB312
Dor-o-Matic 1690 Pinion Support Bracket. Bracket holds pinion tip so that it will not slip
Doromatic part # BRKT.478, BRKT.133 or PB312
Dor-o-Matic 1690 Repair Parts Breakdown
GPB312 -
Dor-o-Matic 1690/1990 Retractor PB35
The Dor-o-Matic 1690/1990 Retractor PB35 has been used since the 1970's. The manufacture has changed names in the last 5 years and now goes by Falcon Panic Hardware. This piece is used the 990, 1690 and 1990 devices. The pinion rides inside this bracket to raise and lower the internal rods. Parts used with the retractor are the Pinion (G199005), Traveller (G199028) and the Pinion Bushing (G199046). Retractor measures 1-7/8" long by 7/8" wide by 1/4" thick.
Doromatic part # PB35 or RETRACT.101
G199035 -
Falcon 650375 F-19-V/F24-V/F25-V/FXX-V Fire Rated Top Latch
The Falcon/Monarch Fire Rated Top Latch is used on the F-19-V, F-24-V, F-25-V, F-18-V and F-XX-V Surface Vertical Rods. The new number from Falcon is 650375, the old Monarch Number was F588. This latch is used on the above devices that are Fire Rated, meaning you can not dog these device in the Unlock Position. If your device has the ability to be dogged open, then use the G588 Non Fire Rated Version
GF588 -
Dor-o-Matic 1690/1790 Hinge End Cap Kit PB314
The Dor-o-Matic Falcon 1690/1790 Hinge End Cap Kit PB314 includes both pieces and the mounting screws. It is made of die cast metal that is powder coat painted to a black color. This piece is mounted on the hinge side of the door. Doromatic / Falcon part # ECAP.130 or PB314. Formly known as the ECAP.129
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownGPB314 -
Dor-O-Matic 1690/1790/2390 Dogging Hex Shaft
The Dor-O-Matic 1690/1790/2390 Dogging Hex Shaft is the piece that your dog key (allen wrench) fits into the lock the device in the open or dogged position. This shaft is used on the 1690, 1790, and 2390 device. The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008. They are basically the same device, with the same parts, just a different name plate. The part that the hex key fits into is only about 1/4" deep, because of that these tend to get rounded out, so the key will not move the shaft.
To remove the old shaft just pull with a pair of Channel Locks or Pliers. To reinstall, just press it back in to position, you might have to bend the holding tabs back down, but we very rarely have to do this. The manufacture part number on this is SHAFT.101.
GPBX16-SHF -
Dor-o-Matic 1690/1790 Screw PB345
Dor-o-Matic 1690/1790 Lock Stile Screw
Doromatic part # SCREW.1077 or PB345
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownGPB345 -
Sargent 281 Door Closer
The Sargent 281 Door Closer is also known as the Powerglide, This closers meets ADA requirements, meets the Buy American Act, and is certified Grade 1, the heaviest rating possible. The closer has the capability to be mounted on the push, pull or top jamb, and is non handed. This closer is the replacement for the 1250 and 1251 series closers. This closer has been the replacement for the 1250 since about 2000. It is manufactured of an aluminum alloy.
Replaces the older Sargent 1250 and 1251 door closers, mounting holes will match
281- -
Dor-o-Matic 1690/1990 Top Rod Latch Assembly PB130
The Dor-o-Matic 1690/1990 Top Rod Latch Assembly PB130 is also used on the 1390, 1490 and 2390. This latch has been around since the 1970's, and is usually the issue if your bottom rod is dragging on the floor. Although we are calling it Dor-o-Matic, it is actually known as a Falcon SU Top Latch due to a name change 5 or 6 years ago. This latch rolls over when the device is pressed in and then locks in that position. When the door closes, the 'U" channel of the latch flips over to a vertical postion and drops the rods. This latch always uses the PB48 Strike, our part # G199034. The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008. They are basically the same device, with the same parts, just a different name plate. Falcon part # PB130 or 4270101806.
G199025 -
Dor-o-Matic 1690 Lock Stile Screw PB114
Dor-o-matic 1690 Lock Stile Screw
1/4-20 Phillips Head Screw, a liite less than 1/2" overall lenght.
Doromatic part # SCREW.1069 or PB114
Dor-o-Matic 1690 Repair Parts Breakdown
GPB114 -
International Door Closer 8610S Rim Device-Grade 1
International 8610S Rim Device-Grade 1
DC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.
Non handed, 4-1/2" minimum stile width. Smooth Surface.
8610S- -
Dor-o-Matic 1690 Retainer Screw PB141
Dor-o-Matic 1690 Retainer Screw.
Doromatic part # SCREW.1074 or PB141
Dor-o-Matic 1690 Repair Parts Breakdown
GPB141 -
Dor-o-Matic 1690 Lift Bracket PB127
Dor-o-Matic 1690 Lift Bracket. This is the bracket the Concealed Vertical Rods Connect to.
Doromatic part # BRKT.138 or PB127
Dor-o-Matic 1690 Repair Parts Breakdown
GPB127 -
Dor-o-Matic 1690/1990 Bottom Rod PB25
Dor-o-Matic 1690/1990 bottom rod. Connects panic bar to the bottom latch
Doromatic Part # 4270101825 PB25 and GPB25
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts BreakdownG199024B -
Falcon / Dor-o-Matic MEL1690 Panic Device
The same as the Falcon / Dor-o-Matic 1690 with Mechanical Electric Latch Retraction. Some of the features are listed below. A power supply is required.
Hand: Field reversible, non-handed.
Centercase and end cap are powder-coated black only.
Strikes: PB48 top.
Latches: Hex bottom latch (standard), RL - rod bottom latch, PL - Pullman bottom latch
Cylinder: Rim, key entry (NL) or hold back (HB) feature available.
Field selectable.
Sizes: 30", 36", 42", and 48".
Doors: 1-3/4" thick metal doors, specify if other.
Projections: 3-3/8" in neutral position, 23/8" in dogged position.
Pushbar height is 2-1/2.
Stile: 1-3/4" minimum.Replacement parts are also available
Shipped with all screws and strikes.
MEL1690EO- -
Dor-o-Matic 1690/1790 Push Bar Pin PB322
Dor-o-Matic 1690 and 1790 Pushbar Pin
Doromatic part # PIN.128 or PB322
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownGPB322 -
Dor-o-Matic 1690/1790/2390 Dogging Spring PB323
Dor-o-Matic 1690, 1790 and 2390 Dogging Spring
Doromatic part # 971493-76 or PB323
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts Breakdown
Falcon / Dor-o-Matic 2390 Parts Break DownGPB323 -
Dor-o-Matic 1690 Hex Soc Set Screw PB317
Dor-o-Matic 1690 Hex Socket Set Screw-PB317
1/4-20 x 3/8"
Doromatic part # SCREW.1067 or PB317
Dor-o-Matic 1690 Repair Parts Breakdown
GPB317 -
Cal Royal Panic Device 7700 Rim Device
Cal Royal 7700 Rim Exit Device
For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement. ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs. Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing. Trims are thru bolted for additional security. Conforms & Meets ADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1777 codes. UL Listed for Fire Exit Hardware. Uncompromising security and safety in single and double fire exit doors. Chassis mounted unit construction. Rim and vertical rod devices are non-handed and easily reversible. Available in many different functions. Lever and escutcheon trims are grade 1 construction with clutch free-wheeling mechanism. Rose and escutcheon covers 161 cut out.
Templating matches the Von Dupin 99 and 98
CR7700EO- -
Dor-o-Matic 1690/1790 End Cap Bracket Screw PB315
Dor-o-matic Falcon 1690 and 1790 End Cap Bracket Screw. This screws holds the bracket that holds the end cap.
Doromatic part # SCREW.1070 or PB315
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownGPB315 -
Dor-O-Matic 1690/1790/1990/2090 Cylinder Bushing BUSH.102
The Dor-O-Matic 1690/1790/1990/2090 Cylinder Bushing BUSH.102 fits around the Pinion gear to take up slack and reduce friction. This piece is now known as the Falcon Panic Hardware BUSH.102, but for many years was called the Dor-o-Matic PB46.
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1090/2090 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts Breakdown
Dor-o-Matic 1790 Repair Parts BreakdownG199046 -
Von Duprin 8827-F Top Latch Cover Kit 050465
The Von Duprin 8827-F Top Latch Cover Kit 050465 the Top Latch Cover for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted position.
Von Duprin Part # 050465
Old Part # 96120688VR30F