Search results for: 'fire door parts american device H-1'
- Related search terms
- door series 30 push bar panic exit dor parts 1311
- door series 30 push bar panic exit dog parts 1308
- door series push bar panic exit dor cal parts 1308
- door series 30 pull bar panic exit dor parts 1310
- door series 30 push bar panic exit deep parts 1310
- door series 30 pull bar panic exit detex parts 1306
- door series 30 push bar panic exit drop parts 1307
- door series 30 pull bar panic exit deep parts 1308
- door o matic 1 panic device 1309
- dooramatic door series 30 push bar panic exit devic parts 1315
-
International Door Closer 8610S Rim Device-Grade 1
International 8610S Rim Device-Grade 1
DC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.
Non handed, 4-1/2" minimum stile width. Smooth Surface.
8610S- -
International Door Closer 8630S SVR Device-Grade 1
International 8630S Surface Vertical Rod Device-Grade 1
DC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.
Non handed, 4-1/2" minimum stile width. Smooth Surface.
For doors 29" to 36" wide order the Size 30 to 36"
For doors 36" to 48" wide order the Size 48"8630S- -
Door Sweep 1" Long Rubber
The Door Sweep 1" Long Rubber has an over height of 1-7/8", with 1" of it being the gray rubber seal. The mounting rail is constructed of extruded aluminum and is available in aluminum or dark brown finishes. This sweep ships with screws.
International Part # IDC-97V
IDC97V- -
International Door Closer 5530S SVR Device-Light Duty
International 5530S Surface Vertical Rod Device-Light Duty
All devices are non-handed design
Auxiliary guarded latch deadlocks latch bolt automtically locks when the door is closed
High shock-resistant latching mechanical design or protection from vandalism
All inside components are made of high rust-resistant alloy or heavy electroplated steelStandard 36”: Device length is 33 15/32” (850mm) for 3’ door use, with a standard push bar.
Long 48”: Device length is 44 3/4” (1137mm) for 4’ door use, with long push bar.Standard vertical rod accommodates 7’ or 8’ doors
We offer the aluminum and dark bronze finish online, the polished brass and stainless steel finishes are available.
5530S- -
Door Pull Offset 1" Diameter PH-4000
The Door Pull Offset 1" Diameter PH-4000 is usually used on aluminum frame glass doors. This handle offers three different mounting options, one is surface mounted, where the handle is mounted over a mounting stud and then you tighten the set screw to hold the handle in place. The second method is thru bolted, the bolt goes all the way thru the door. And the third is back to were you have two handles mounted back to back. This handle projects 3-1/4", has a 2-1/4" door clearance, comes in 9", 10" and 12" centers. One of the most popular handles we sell.
PH-4000- -
International Door Closer 5510S Rim Device
International 5510S Rim Device-Light Duty
All devices are non-handed design
Auxiliary guarded latch deadlocks latch bolt automtically locks when the door is closed
High shock-resistant latching mechanical design or protection from vandalism
All inside components are made of high rust-resistant alloy or heavy electroplated steelStandard 36”: Device length is 33 15/32” (850mm) for 3’ door use, with a standard push bar.
Long 48”: Device length is 44 3/4” (1137mm) for 4’ door use, with long push bar.5510S- -
International Door Closer 7101 CVR Device
International 7100 Concealed Vertical Rod Device
Modern flat touch bar Concealed Vertical Rod Device Panic exit device. This series offers durability, safety and meets the security demand and access control needs of today. Series 7300 Rim Panic exit devices are used with Narrow, Medium and Wide aluminum door and Hollow Metal and Wood Door applications. Series 7300 is non-handed, Field Reversible for LHRB or RHRB doors. Outside Unlatching and Dogging by Cylinder Key or Dogging by Hex Key in Touch Bar. Standard Units for 36” and 48” in widths (cut bar to fit). Can be used on 30” wide doors.
7101- -
International Door Closer 7301 Rim Device
International 7300 Rim Device
Modern flat touch bar Rim Panic exit device. This series offers durability, safety and meets the security demand and access control needs of today. Series 7300 Rim Panic exit devices are used with Narrow, Medium and Wide aluminum door and Hollow Metal and Wood Door applications. Series 7300 is non-handed, Field Reversible for LHRB or RHRB doors. Outside Unlatching and Dogging by Cylinder Key or Dogging by Hex Key in Touch Bar. Standard Units for 36” and 48” in widths (cut bar to fit). Can be used on 30” wide doors.
7301- -
International Door Closer 9001-TP Series
The International Door Closer 9001-TP Series is a relatively newer closer. This closer features fully adjustable spring tension, closing and latching speeds and back check. The narrow design allows for mounting on the top jamb of store front doors without a drop plate. The closer is non handed, and can be mounted on the push, pull or top jamb positions. It meets all ADA requirements and is a Grade 1 closer, the heaviest rating possible.
3/4" X 11-3/32" Hole Spacing
9001P- -
International Door Closer 5001P Series Adjustable Spring Power
The International Door Closer 5001P Series Adjustable Spring Power is a great closer to use as a replacement for the many 3/4" by 12" mounting holed closers. This door closer is fully adjustable with sweep, latching and back check adjustments, a long with an adjustable spring tensoin control. This closer can be adjusted to less then 8-1/2" pounds of resistance to meet ADA standards. You can install this closer on the push, pull or top jamb, we ship the regular arm and a parallel arm bracket. This closer has the same mounting holes as the Norton 8000 and Yale 3000 door closers.
Hole spacing 3/4" x 12"
5001- -
International Door Closer 521 Regular Arm Forearm
The International Door Closer 521 Regular Arm Forearm measures 9-1/2" loop to loop in the shortest position, and 14" when it is the fully extended . The loop on the left side is 3/8" diameter. The hole spacing on the right hand side of the picture shoe is 1-3/4".
International part # 521
G521- -
International 8600 Series End Cap
The International 8600 Series End Cap is used on the hinge side of the the exit device. This cap includes the mounting bracket and the mounting screws. It is constructed of a die cast metal for years of service. The piece measures 2-3/8" by 2-1/4" by 1-1/2". This end cap is used on the International Door Closer models, 8510S, 8610S, 8710S, 8810S, 8620S, 8530S, and 8650S devices, along with the same devices ending in F.
INT8600EC- -
International Door Closer 884P Series
The International Door Closer 884P Series is a very common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features three adjustment valves for closing,latching speeds and one for back check. The cylinder is constructed of precision cast aluminum. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 42” interior or 36” exterior doors.3/4" x 9-1/16" mounting holes
884- -
International Door Closer 885P Series
The International Door Closer 885P Series is a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features three adjustment valves for closing,latching speeds and one for back check. The cylinder is constructed of precision cast aluminum. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 48” interior or 42” exterior doors.3/4" x 9-1/16" mounting holes
885- -
International Door Closer 854P Series
The International Door Closer 854P Series is a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and whether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 42” interior or 36” exterior doors.
3/4" x 9-1/16" mounting holes
854- -
International Door Closer 855P Series
The International Door Closer 855P Series is a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 48” interior or 42” exterior doors.
3/4" x 9-1/16" mounting holes
855- -
International 5000 Series 58L Escutcheon Trim
International 58L Escutcheon Trim for the 5000 Series Devices
Non-handed, easily install with exit device Escutcheon plate measures 8-1/16" tall by 2-5/8" wide by 29/32" thick. We offer 3 functions, Classroom, Passage and Storeroom.
Classroom - cylinder (not included) locks and unlocks lever handle-Most Popular
Passage - no cylinder hole, lever always active
Storeroom - cylinder (not included) unlocks lever, but lever is always locked when key is removed.58L01- -
International Door Closer 1802-P - Fixed Spring Closer
The International Door Closer 1802-P - Fixed Spring Closer is one of the heaviest duty closers in the International product line. It offers a 10 year warranty, and is Grade 1 rated, which is the highest rating you can have. The closer features three adjustment valves for closing,latching speeds and one for back check. The cylinder is constructed of precision cast aluminum. It ships with a regular arm and parallel arm bracket. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. This door closer is for use on doors up to 36” interior and is not recommended for exterior doors.
3/4" X 9-1/16" Hole Spacing
1802- -
International Door Closer 44CI Adjustable Spring Power
The International Door Closer 44CI Adjustable Spring Power is one of there heaver duty closers. It is designed to line up with the LCN 4040 hole spacing at more than half the price. It features a rugged cast iron body with a forged steel arm. It also uses all weather fluid, is non handed and is non sized, meaning you can adjust the door for any size door. The door closer we are selling here come with a regular arm and parallel arm bracket, so the closer can be mounted on the left or right, push, pull or top jamp. The closer has 4 adjustments, closing, latching, and back check valves, a long with a spring power adjustment.
44CI- -
International Door Closer 1803BC-P - Fixed Spring Closer
The International Door Closer 1803BC-P - Fixed Spring Closer is one of the heaviest duty closers in the International product line. It offers a 10 year warranty, and is Grade 1 rated, which is the highest rating you can have. The closer features three adjustment valves for closing,latching speeds and one for back check. The cylinder is constructed of precision cast aluminum. It ships with a regular arm and parallel arm bracket. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. This door closer is for use on doors up to 42” interior or 36” exterior doors.
3/4" X 9-1/16" Hole Spacing
1803- -
International Door Closer 1805BC-P - Fixed Spring Closer
The International Door Closer 1805BC-P - Fixed Spring Closer is one of the heaviest duty closers in the International product line. It offers a 10 year warranty, and is Grade 1 rated, which is the highest rating you can have. The closer features three adjustment valves for closing,latching speeds and one for back check. The cylinder is constructed of precision cast aluminum. It ships with a regular arm and parallel arm bracket. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. This door closer is for use on doors up to 54” interior or 48” exterior doors.
3/4" X 9-1/16" Hole Spacing
1805BC- -
International 300 Series Adjustable Power Door Closer
The International 300 Series Adjustable Power Door Closer is one of there new closers to meet ADA requirements. With this door closer you can adjust the spring tension, closing and latching speed, even after it was installed. The Spring Power is adjustable all the way down to 8-1/2 pounds of resistance, making it ideal for areas with the elderly and children.
Hydraulic Cylinder only
3000-B-310 105 with Hold Open
3000-B-311 105 with No Hold Open
3000-B-312 90 with Hold Open
3000-B-313 90 with No Hold Open3000-B -
Plunger Door Holder / Stop DH6000
The Plunger Door Holder / Stop DH6000 is one of the most common plunger style door stops we offer. They are constructed of a cast zinc alloy that is then electro statically painted to either an aluminum or dark brown color. It features a non marring rubber tip that is replaceable, and we keep in stock. The body measures approximately 7" long and is 1-5/8" wide. The throw on this stop is 1-1/8". These are sometimes called pop-up or push down door stops. This product ships with the mounting screws.
Made by International Door Closer
GDH6000- -
International Door Closer Arm and Track 3020-VO
The International Door Closer Arm and Track 3020-VO is for offset top arm assemblies, with the track mortised in the top of the door. This track and arm are for the 7/8" depth of top rail application. Track measures 12-5/8" long by 1/2" high by 1-1/4" wide. For use with the 2000, 3000 and 5000 series concealed closers.
3010-VO -
Intermediate Hinge IP-2202 and IP-2201
Intermediate Hinge IP-2202 and IP-2201
Cast aluminum construction with steel bearings and axle. The set measures 3-1/2" tall with an 1-3/8" projection. This hinge is usually used an an intermediate hinge in between the top and bottom hinge.
Manufacture part # IP-2202 and IP-2201
IP-2202 is for Right Hand Doors
IP-2201 is for Left Hand DoorsGIP2201- -
International Door Closer Main Arm 520
The International Door Closer Main Arm 520 is a replacement arms used on the 640, 650, 850 and 880 series. This arm is probably used on other International Closers also. The arm measures 12" overall length, and fits a 7/16" square shaft.
International Door Closer part # 520
G520- -
International Door Closer 851P Series
The International Door Closer 851P Series is not a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 32” interior or 28” exterior doors. The 851 meets the size 1 ADA requirements.
3/4" x 6-3/8" mounting holes
851- -
International Door Closer 1804BC-P - Fixed Spring Closer
The International Door Closer 1804BC-P - Fixed Spring Closer is one of the heaviest duty closers in the International product line. It offers a 10 year warranty, and is Grade 1 rated, which is the highest rating you can have. The closer features three adjustment valves for closing,latching speeds and one for back check. The cylinder is constructed of precision cast aluminum. It ships with a regular arm and parallel arm bracket. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. This door closer is for use on doors up to 48” interior or 36” exterior doors.
3/4" X 9-1/16" Hole Spacing
1804- -
International Door Closer 8051-TP Series
The International Door Closer 8051-TP Series is an ideal replacement closer for just about any Store Front Door. We recommend this closer because it will fit any size door, and you can adjust the spring tension to make it easier for the elderly, smaller children and the handicapped. The 8051 will work in interior or exterior doors, and will meet ADA codes. This door closer will work on a Right or Left Hand Door, Push or Pull side or Top Jamb mounting, it ships with a parallel arm bracket, arm and mounting screws along with a full plastic cover. We ship the 8051-TP DU or 8051-TP AL depending on the color you choose. Length of Closer is 9-3/4”, Horizontal Mounting Holes 9-1/16”, Vertical Mounting Holes 3/4”, overall height is 4-21/32” with height of l1-21/32”, and projects 2-29/32” from the door face. The 4 adjustment valves are Closing and Latching Speed, Power and Back Check.
8050- -
Intermediate Hinge IP-1901 and IP-1902
Intermediate Hinge IP-1901 and IP-1902
Cast aluminum construction with steel bearings. The hinge measures 5" high by 2-1/2" wide. This hinge has a 3/4" offset. We find this hinge in the middle section of the door between the top and bottom hinges. Available in the Aluminum color and Dark Brown. See the dimensional information under more views.
Manufacture Part # IP-1901 and IP-1902
IP-1901 is for Left Hand Doors
IP-1902 is for Right Hand DoorsGIP1901-