Search results for: 'fire door looking parts von dark'
-
Kickdown Door Holder Rubber Shoe For GJ1154M and GJL444-555
Rubber Shoe For GJ1154M and GJL444-555 Kickdown Door Stop / Holder
Replacement rubber shoe
5/8" insert diameter
1" base diameter
8-32 threaded screwGJ1154 -
Floor Door Stop / Holder
The F20 or GJF20 was a mainstay of Glynn-Johnson for years. When the Glynn-Johnson door stop line merged with H.B. Ives it became the FS20. This door stop has been discontinued from Ives, but we have been able find a large stock. This Floor Mounted Door Stop also holds the door open, when in the latched position you can push the door and the holding latch will flip up and unlock thee holding clip. It is constructed of cast bronze or brass and then plated to your desired finish. This stop has a 2-1/2" long base that is 1-1/2" wide. The overall height is 3-1/8" with a 2-5/16" floor to rubber stop centerline. For use with door undercut up to 2-1/2".
GJF20- -
Door Silencers For Wood Doors
Door Silencers For Wood Doors
For use on Wood Doors. Insert into 1/4" hole in door frame.
Height: 3/4"
Diameter: 3/8"
Thickness: 1/8"GJ65 -
Ives 7222 Pivot Set
• Handed
• Top, header mount
• Bottom, base plate mount
• Use with 1-3/4" minimum door thickness, with 1/8" bevel in 2"
• Maximum door load 200 pounds
• Vertical adjustment range 3/16", with positive locking7222 -
Wall Door Stop WS11
The WS11 door stop used to be under the Glynn-Johnson product line as the WB11 until they merged with H.B. Ives. At that point they became the WS11. This stop only is constructed of cast brass and then plated to your desired finish. The stop has a 2" diameter base and projects from the wall 3-3/4". This particular model is the same as the WS11x, except that it is designed for wood or drywall mounting and ships with wood screws and anchors.
GJWB11- -
Wall Door Stop / Bumper Convex WS407-CVX
The Ives Wall Bumper Stop WS407-CVX our economically price convex wall bumper. The metal ring is a wrought stainless steel, otherwise known as stamping. It features a concealed tamper-proof mounting, and is shipped pre-assembled to the back plate is reduce installation time. Installation is easy, just insert the screw driver through the pin hole in the rubber and tighten. The bumper is 2-1/2" in diameter and projects out 1".
GJ50W- -
Wall Door Stop WS65
The Ives Wall Door Stop WS65 is one of the most economical door stops we sell that is still commercial quality. They are constructed of burnished cast aluminum. The WS65 has a base diameter of 1-5/8" and a 3-3/4" projection. The rubber tip is replaceable. This stop comes with the mounting screws.
WS65-- -
Continuous Full Mortise Hinge
The Ives 112HD Continuous Full Mortise Hinge Geared Hinge measures 83" long and is constructed of extruded aluminum. This hinge is non handed, and will work on doors up to 48" wide and 450 pounds. You can easily cut this hinge in the field if your door is less than 83" high.
GFM100- -
Wall Door Stop / Bumper Concave WS407-CCV
The Ives Wall Bumper Stop WS407-CCV our economically price concave wall bumper. The metal ring is a wrought stainless steel, otherwise known as stamping. It features a concealed tamper-proof mounting, and is shipped pre-assembled to the back plate is reduce installation time. Installation is easy, just insert the screw driver through the pin hole in the rubber and tighten. The bumper is 2-1/2" in diameter and projects out 1".
GJ60W- -
Floor Door Stop-Security FS18
Floor Door Stop-Security FS18 is designed for areas of high vandalism. The molded rubber is flame resistant and mounted to a 5/8" threaded mounting shaft. Once the 7/8" diameter hole is drilled to a depth of 2-1/2" it can be grouted in concrete and leaves no exposed fasteners. The recommended grout is Thorogrip. They are ideal for jail or security cell areas. There are two versions of this door stop one projects 1-1/2" (FS18S) out of the floor and the other 3" (FS18L).
GFS18- -
Continuous Full Surface Geared Hinge
The Ives 157XY Continuous Full Surface Geared Hinge is an ideal solution for the replacement or worn or broken storefront door pivots, which we run across quite often. I our opinion this is the best solution if you can not find a compatable replacement pivot. The geared hinge will not allow the door to twist, which makes your door more sturdy in the frame. This hinge measures 83" long and is 3-7/16" wide included the cover which hides the screw mounting. A patented easy to install, heavy duty hinge which offers lateral and vertical adjustablility whle the door is still hanging. The hinge is non handed, will mount on a narrow frame, can be cut down in the field and will work on doors up to 550 pounds. 12-24 x 1/2" steel self drilling and tapping screws are included.GFS102- -
Floor Mounted Dome Stop FS439
The Ives Universal Dome Floor Stop FS439 is constructed of cast zinc or stainless steel, depending on the finish. The stop measures 1-1/2" high, with a base height of 1/4" and base diameter of 1-7/8". The pad has a height of 1-1/8" from the floor.
Ives Part Number FS439
GFS439- -
Roller Bumper Offset RB470
The Ives Roller Bumper Offset RB470 are ideal if you have situations where doors meet each. They are constructed cast brass or bronze and are then plated to the desired finish. The arm projects 5" and the base has a 1-11/16" x 2-1/4". The device was just like the Glynn-Johnson RB3 or GJRB3.
GJRB3- -
Ives Roller Bumper Straight Arm 6" RB472
The Ives Roller Bumper Straight Arm 6" RB472 are ideal if you have situations where doors meet each. They are constructed cast brass or bronze and are then plated to the desired finish. The arm projects 6" and the base has a 2" diameter. The device was just like the Glynn-Johnson RB6 or GJRB6.
GJRB6- -
Roller Bumper Straight Arm 4" RB471
The Ives Roller Bumper Straight Arm 4" RB471 are ideal if you have situations where doors meet each. They are constructed cast brass or bronze and are then plated to the desired finish. The arm projects 4-1/2" and the base has a 2" diameter. The device was just like the Glynn-Johnson RB4 or GJRB4.
GJRB4- -
Ives LG1 Lock Guard
The Lock Guard with Security Pin is ideal to cover the latchbolt area of the door, lock and frame, with the added protection of a security pin to prevent separation of the door and door frame. The plate is through bolted with carriage bolts and nuts, which are included with the guard. The plate is constructed of 13 gauge stainless steel. The plate measures 3" wide and 11-1/2" high, with a center to center on the mounting bolts of 10-1/2".
Ives Part Number LG1-US32D
LG1- -
Door Silencer For Metal Frames
For use on metal frames featuring
pneumatic design that, once installed,
forms an air pocket to absorb sound and
reduce noise of door closing.Diameter: 1/2"
Thickness: 1/8"
GJ64 -
Ives 7212INT Intermediate Pivot
• Use with 7212, 7212V or 7222 3/4 Offset Pivot
• Handed
• Vertical adjustment 3/16", include positive locking.7212INT -
Ives 7222INT Intermediate Pivot
• Use with 7212, 7212V or 7222 3/4 Offset Pivot
• Handed
• Vertical adjustment 3/16", include positive locking.7222INT -
Dust Proof Strike DP2
• Designed for use with the bottom bolt of all flush bolts.
• Spring-loaded plunger returns to floor or threshold level anytime
flush bolt is retracted, eliminating need to clean standard
floor strikes.
• Strike hole is 3/4" Diameter and 1-1/8" Deep
DP2 Face Plate: 1-5/8" W x 3-1/2" L x 1/8" Thick
Body: 1-3/16" Diameter x 1-7/8" DeepDP2- -
Ives RL32 Roller Latch
Ives RL32 Roller Latch
The Ives RL32 Roller Latch is constructed of Brass and Plated to your desired finish. The body measures 1-1/8" wide by 2-1/4" high and 2-1/4" deep. The roller is constructed of Nylon, and has an adjustable projection up to 1/2". Fits a standard heavy-duty cylindrical lock cutout.
RL32- -
Ives Surface Bolt 8" SB453
The Ives Surface Bolt 8" SB453 has a 1-3/16" throw. The bar has a cross section measurement of 3/4" wide by 1/4" thick. It features a strong tension springs to prevent the bolt from creeping. The bolt is shipped with all of the fasteners and a universal top and a standard mortise strike. It is constructed of heavy duty steel that is then cadmium plated.
Ives part # SB453-8-TB-2C
GSB82C -
Ives Dust Proof Strike DP1
Ives Dust Proof Strike DP1
• Designed for use with the bottom bolt of all flush bolts.
• Spring-loaded plunger returns to floor or threshold level anytime
flush bolt is retracted, eliminating need to clean standard
floor strikes.
• Strike hole is 3/4" Diameter and 1-1/8" DeepDP1 Face Plate: 1-7/16" Diameter
Body: 1-3/16" Diameter x 1-7/8" DeepDP1- -
Ives RLPART.1025 Roller and Rivet for RL30/RL1152
Ives RLPART.1025 Roller and Rivet for RL30/RL1152
This replacement Nylon Roller and Rivet Package is for the Ives RL30 and RL1152 Roller Latches. The Roller measures 3/4" high by 5/8" diameter. The Rivet measures 1-1/16" long and is threaded on one side.
Ives Part # RLPART.1025
RL30NR -
Lock Guard Standard Line
• Ideally suited for use with rose or escutcheon 2-3/4" wide or less.
• For use with Type 86 Mortise and Type 161 Cylindrical Locks
(ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000).
• No exposed fasteners on face of unit.
• Unique design provides maximum security, virtually eliminating the
opening between door and frame at the latch point.
• Available in 13 Gauge Stainless Steel or 12 Gauge Steel.2-1/2" Wide x 9-1/2" High
Stud center to center: 8-1/2"1625- -
Lock Guard Narrow Line
• Narrow design unit for use on rose or escutcheon 3-1/2" or less.
• For use with Type 86 Mortise and Type 161 Cylinder Locks
(ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000).
• No exposed fasteners on face of unit.
• Unique design provides maximum security, virtually eliminating the opening
between door and frame at the latch point.
• Available in 13 Gauge Stainless Steel or 12 Gauge Steel1-1/2" Wide x 9-1/2" High
Stud center to center: 8-1/2”1625NL- -
Lock Guard Slim Line
• Designed for use on all Type 161 Cylindrical Locks (ANSI 156.2 Series 2000)
Monolock and Unilock.
• No exposed fasteners on face of unit.
• Unique design provides maximum security, virtually eliminating the
opening between door and frame at latch point.
• Available in 13 Gauge Stainless Steel or 12 Gauge Steel.1-1/2" Wide x 7" High
Stud center to center: 4-1/2"1625SL-