Search results for: 'door series 30 pull bar panic exit deep parts'
- Did you mean
- door series 30 pull bar panic exit detex parts 0
- door series 30 pull bar panic exit drop parts 0
- Related search terms
- door series 30 push bar panic exit dor parts 1311
- door series 30 pull bar panic exit dor parts 1310
- exit door panic devicemo square screws parts Store room function 1309
- door series 30 push bar panic exit deep parts 1310
- exit door panic device square screws parts 1318
- exit door panic devices square screws parts 1318
- exit door panic devices square screw parts 1317
- exit door panic devic square screws parts 1317
- exit door panic device square screw parts 1317
- dooramatic door series 30 push bar panic exit devic parts 1315
-
Ives FB40 Automatic Flush Bolt
Wood Door Automatic Flush Bolt FB40
H.B. Ives FB40 Series are sold has Top, Bottom or in Pairs (top and bottom). Fully automatic, inactive door is latched when active door closes, bolts retract when active door is opened. Top Bolt has no spring tension. They are non handed, but the top and bottom bolts are different. The body size is 1" wide, 8-1/2" tall and 2" deep, the bolts have a 3/4" throw with a 7/8" vertical adjustment.
Ives Part #'s
FB41P - Pairs
FB41T - Top
FB41B - BottomFB40 -
Crash Chain Door Stop CS115
Crash Chain Door Stop CS115
- Specially designed for full-size exterior doors.
- Tear resistant, grey vinyl cover.
- Heavy duty compression spring assembled to both ends of chain
and end brackets. - Packed with sheet metal screws.
- Cast Brass brackets with solid, welded steel chain.
Available in 20-1/2", 25-1/2" and 30-1/2" lengths. Length is determined
by the location of your door closerPART # LENGTH
GCC205 20-1/2"
GCC255 25-1/2"
GCC305 30-1/2"GCC205- -
Ives FB61P Constant Latching Flush Bolt for Wood Doors
Ives FB61P Constant Latching Flush Bolt for Wood Doors
The Ives FB61P is used on the inactive leaf of wood fire doors. The latch remains extend until the active door is opened. When the active door is opened the latches retract, and extend when the active door is closed. The bodies measure 1” wide by 8-1/2” tall and 2” deep. The bolt throw is 3/4” with a 7/8” vertical adjustment, and has a 3/4” backset. This package comes with the top and bottom flush bolts with screws and strikes.
90 minute UL Rated.
Ives Part # FB61P
FB61P- -
Ives FB31P Automatic Flush Bolt
Ives FB31P Automatic Flush Bolt
This fully automatic flush bolt is used on the inactive metal fire door. When the active door is opened the latches retract, when the active door closes the latches extend. The Ives FB31P Body is 1” wide by 6-3/4” long and 2” deep. Bolt throw is 3/4” with a 7/8” adjustment with a 3/4” backset, standard rod is 12” which is measured from the center of latch body to the bolt tip.
Rods are also available in 18”, 24” and 36”, call for pricing. We ship the 12” rods, and this set includes the top and bottom flush bolts.
3 Hour UL listed
Ives Part # FB31P
FB31P- -
Dust Proof Strike DP2
• Designed for use with the bottom bolt of all flush bolts.
• Spring-loaded plunger returns to floor or threshold level anytime
flush bolt is retracted, eliminating need to clean standard
floor strikes.
• Strike hole is 3/4" Diameter and 1-1/8" Deep
DP2 Face Plate: 1-5/8" W x 3-1/2" L x 1/8" Thick
Body: 1-3/16" Diameter x 1-7/8" DeepDP2- -
Ives Dust Proof Strike DP1
Ives Dust Proof Strike DP1
• Designed for use with the bottom bolt of all flush bolts.
• Spring-loaded plunger returns to floor or threshold level anytime
flush bolt is retracted, eliminating need to clean standard
floor strikes.
• Strike hole is 3/4" Diameter and 1-1/8" DeepDP1 Face Plate: 1-7/16" Diameter
Body: 1-3/16" Diameter x 1-7/8" DeepDP1- -
Floor Door Stop / Holder FS43
Floor Door Stop / Holder FS43
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF43A or F43A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS43. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 1-5/8" to 2-1/16"
Holder Dimensions 3" Wide x 3-11/16" HighGJF43A- -
Floor Door Stop / Holder FS41
Floor Door Stop / Holder FS41
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF41A or F41A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS41. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 9/16" to 1-1/16"
Holder Dimensions 3" Wide x 3-11/16" HighGJF41A- -
Floor Door Stop / Holder FS40
Floor Door Stop / Holder FS40
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF40A or F40A, and was brought over to the H.B. Ives line in the 1990's. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 1/2" or less
Holder Dimensions 3" Wide x 3-11/16" HighGJF40A- -
Ives RL30 Roller Latch
Ives RL30 Roller Latch
The Ives Roller Latch RL30 is constructed of Forged Brass and Plated to your finish. Furnished with a Nylon Roller. Body measures 1" wide by 3-3/8" high by 1-11/16" deep. The roller has a maximum projection of 3/8" and is easily adjustable.
RL30- -
Floor Door Stop / Holder FS42
Floor Door Stop / Holder FS42
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF42A or F42A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS42. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 1-1/8" to 1-9/16"
Holder Dimensions 3" Wide x 3-11/16" HighGJF42A- -
Ives RL32 Roller Latch
Ives RL32 Roller Latch
The Ives RL32 Roller Latch is constructed of Brass and Plated to your desired finish. The body measures 1-1/8" wide by 2-1/4" high and 2-1/4" deep. The roller is constructed of Nylon, and has an adjustable projection up to 1/2". Fits a standard heavy-duty cylindrical lock cutout.
RL32- -
Ives Surface Bolt 8" SB453
The Ives Surface Bolt 8" SB453 has a 1-3/16" throw. The bar has a cross section measurement of 3/4" wide by 1/4" thick. It features a strong tension springs to prevent the bolt from creeping. The bolt is shipped with all of the fasteners and a universal top and a standard mortise strike. It is constructed of heavy duty steel that is then cadmium plated.
Ives part # SB453-8-TB-2C
GSB82C -
Lock Guard Narrow Line
• Narrow design unit for use on rose or escutcheon 3-1/2" or less.
• For use with Type 86 Mortise and Type 161 Cylinder Locks
(ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000).
• No exposed fasteners on face of unit.
• Unique design provides maximum security, virtually eliminating the opening
between door and frame at the latch point.
• Available in 13 Gauge Stainless Steel or 12 Gauge Steel1-1/2" Wide x 9-1/2" High
Stud center to center: 8-1/2”1625NL- -
Plunger Door Holder / Stop FS1154
The Ives Plunger Door Holder / Stop FS1154 has been around for about 50 years. Before the 1990's is was known as the Glynn-Johnson 1154, and when they were merged in the H.B. Ives line, the part number was changed to FS1154. This product is constructed of cast brass or bronze that is then plated to the desired finish. Plunger and internal parts are plated steel and provide a 1-1/4" throw for all types of doors. Plunger is easily activated with minimal pressure, releasing instantly with a light tap on the platform lever. The shoe is non-marring rubber that is securely fastened with a screw in flanged cup to prevent movement or loss, and when worn, shoes are easily replaced and are kept in stock as the GJ1154. These are sometimes called pop-up or push down stops. Ships with matching finish mounting screws.
GJ1154M- -
Lock Guard Slim Line
• Designed for use on all Type 161 Cylindrical Locks (ANSI 156.2 Series 2000)
Monolock and Unilock.
• No exposed fasteners on face of unit.
• Unique design provides maximum security, virtually eliminating the
opening between door and frame at latch point.
• Available in 13 Gauge Stainless Steel or 12 Gauge Steel.1-1/2" Wide x 7" High
Stud center to center: 4-1/2"1625SL- -
Ives FB458 Metal Door Flush Bolt
Ives FB458 Metal Door Flush Bolt
The Ives FB458 is a UL Listed Flush Bolt for use on Fire Doors. The face plate measures 1" wide by 6-3/4" long with a depth of 1-1/8". Hole spacing is 1/2 inch by 6-1/4 inches on centers. The bolt has a 3/4" throw and is 1/2" diameter. This Flush Bolt is available in Polished Brass, Oil Rubbed Bronze (dark brown) and Brushed Chrome. We try to stock the 12" rods, which are standard, but we can also get 18", 24", 36" and 48"
Ives Part # FB458
FB458- -
Lock Guard Standard Line
• Ideally suited for use with rose or escutcheon 2-3/4" wide or less.
• For use with Type 86 Mortise and Type 161 Cylindrical Locks
(ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000).
• No exposed fasteners on face of unit.
• Unique design provides maximum security, virtually eliminating the
opening between door and frame at the latch point.
• Available in 13 Gauge Stainless Steel or 12 Gauge Steel.2-1/2" Wide x 9-1/2" High
Stud center to center: 8-1/2"1625- -
Wall Mounted Door Stop WS33
The Ives Wall Mounted Door Stop WS33 is another hold back part from the Glynn-Johnson door stop era. I can not remember the Glynn-Johnson part #, but when Ives purchased them, they changed it to WS33. This stop is constructed of cast brass that is then plated to the desired finish. It features a replaceable rubber bumper with offset shoulder screws into cavity on body to prevent loss or theft. And a sloping design that discourages vandalism.The base height is 3" with a width of 2-1/4", and a projection of 3-3/4", WS33 is furnished with wood screws for drywall mounting
WS33- -
Floor Door Stop FS434
The Floor Door Stop FS434 is another one the old Ives parts that has been around for about 40 plus years. The FS434 is constructed of burnished wrought steel, with a soft, resilient gray rubber shoe. The shoe is replaceable and is under related products. The stop measures 2-5/8" overall height, and the base measures 1-1/2" wide by 2-3/4" long. This door stop ships with all the fasteners and anchors needed.
GJ434 -
4" Kickdown Door Holder FS452
4" Kickdown Door Holder FS452
The H.B. Ives FS452 is another classic kick down door stop. It features a simple hold and release, activated with a touch of the foot, and is constructed of cast bronze or brass depending on the finish you are ordering. A simple stainless steel spring clip holds the stop in the up position. The non-marring rubber shoe is replaceable, and they have a corrugated bottom to prevent sliding on the floor and a secure grip. This stop is shipped with matching finish sheet metal screws. The 4" model is for door to floor clearances of 2" or less. The hole spacing is 19/32" x 1-47/64".
Ives Part # FS452
GJ452-4- -
Plunger Door Holder / Stop FS1153
The Ives Plunger Door Holder / Stop FS1153 is manufactured by H.B. Ives and features a contemporary yet economical method of positive Hold-Open. This was another one of the Glynn-Johnson door stops that was merged in the H.B. Iver product line in the 1990's, and went by the 1153 part number. This door stop is constructed in sturdy cast aluminum for years of service. The spring operated plunger activates with minimal pressure, releasing instantly with a light tap on the plat-form lever. The stop has a 1-5/8" throw or projection for all types of doors. The ribbed non-marring rubber shoe is securely fastened to unit with a screw and is easily replaced when worn. These are sometimes called pop-up or push down stops. Ships with mounting screws.
Aluminum finish only
GJ1153M -
Ives Gravity Type Door Coordinator COR9G
Gravity Door Coordinator 9"
The Ives COR9G has been around for at least 50 years. In the old days before electrically activated door closers fire doors would have fusible link armed door closers. When the lnk melted, the door closed, and if there was not a mullion between door, they would use this style of door coordinator so the door with the astragal would close first.
When active door is open, coordinator prevents active door from closing until inactive door bypasses. Closing of inactive door causes strike plate on top of door to contact cam and lift arm, allowing active door to close. As inactive door continues closing, roller rides over strike plate on to door bracket, holding arm above active door.
Non-handed.Gravity action arm and door bracket are adjustable on the job for ease of installation. Rubber roller provides quiet and efficient operation, and helps protect the astragal and doors from damage. Nylon roller on short arm glides smoothly over door bracket and strike, ensuring silent operation. Made of forged brass.
COR9G-26D for use on pairs of doors with astragal on active door over 4' or with astragal on inactive door over 3'4" or with astragal on both doors over 2'10" Brushed Chrome Finish.Ives part # COR9G-26D 9" Arm Projection
COR9G -
Ives Gravity Type Door Coordinator COR7G
Gravity Door Coordinator
The Ives COR7G has been around for at least 50 years. In the old days before electrically activated door closers fire doors would have fusible link armed door closers. When the lnk melted, the door closed, and if there was not a mullion between door, they would use this style of door coordinator so the door with the astragal would close first.
When active door is open, coordinator prevents active door from closing until inactive door bypasses. Closing of inactive door causes strike plate on top of door to contact cam and lift arm, allowing active door to close. As inactive door continues closing, roller rides over strike plate on to door bracket, holding arm above active door.
Non-handed.Gravity action arm and door bracket are adjustable on the job for ease of installation. Rubber roller provides quiet and efficient operation, and helps protect the astragal and doors from damage. Nylon roller on short arm glides smoothly over door bracket and strike, ensuring silent operation. Made of forged brass.
COR7G-26D for use on pairs of doors with astragal on active door up to 4' or with astragal on inactive door up to 3'4" or with astragal on both doors up to 2'10" Brushed Chrome Finish.Ives part # COR7G-26D 7" Arm Projection
1836 -
Wall Door Stop / Holder WS40
The Ives Wall Door Stop / Holder WS40 is a door holder that has some history. We see this product in many schools, hospitals and churches that were built in the 50's, 60's and 70's. The WS40 was originally made and designed by Glynn-Johnson out of Chicago, Illinois, and was called the W40 or GJW40. H.B. Ives purchased Glynn-Johnson in 1990's and mergered this product into there offering, and changed the part # to WS40. The holder is made of cast brass or bronze and plated to your desired finish. The holding mechanism has a rubber bumper inside it to act as a door stop, and a brass spring loaded roller to act as a holder. The product ships with a universal screw package to mount on all types of walls. For the best results with this stop/holder the door and wall should be about 3-1/2" apart in the open position.
Base Height: 2"
Base Width: 2-1/2"
Base Projection: 2-1/4"
Engaged Projection: 3-1/2"
Strike Height: 2-1/16"
Strike Width: 3/4"
Strike Projection: 2"GJW40- -
5" Kickdown Door Stop FS452 | Ives FS452 Kick Down Door Holder
5" Kickdown Door Holder FS452
The H.B. Ives FS452 is another classic kick down door stop. It features a simple hold and release, activated with a touch of the foot, and is constructed of cast bronze or brass depending on the finish you are ordering. A simple stainless steel spring clip holds the stop in the up position. The non-marring rubber shoe is replaceable, and they have a corrugated bottom to prevent sliding on the floor and a secure grip. This stop is shipped with matching finish sheet metal screws. The 5" model is for door to floor clearances of 3" or less. The hole spacing is 19/32" by 1-47/64".
Ives Part # FS452
GJ452-5- -
Kickdown Door Holder Rubber Shoe For GJ1154M and GJL444-555
Rubber Shoe For GJ1154M and GJL444-555 Kickdown Door Stop / Holder
Replacement rubber shoe
5/8" insert diameter
1" base diameter
8-32 threaded screwGJ1154 -
Floor Door Stop / Holder
The F20 or GJF20 was a mainstay of Glynn-Johnson for years. When the Glynn-Johnson door stop line merged with H.B. Ives it became the FS20. This door stop has been discontinued from Ives, but we have been able find a large stock. This Floor Mounted Door Stop also holds the door open, when in the latched position you can push the door and the holding latch will flip up and unlock thee holding clip. It is constructed of cast bronze or brass and then plated to your desired finish. This stop has a 2-1/2" long base that is 1-1/2" wide. The overall height is 3-1/8" with a 2-5/16" floor to rubber stop centerline. For use with door undercut up to 2-1/2".
GJF20- -
Door Silencers For Wood Doors
Door Silencers For Wood Doors
For use on Wood Doors. Insert into 1/4" hole in door frame.
Height: 3/4"
Diameter: 3/8"
Thickness: 1/8"GJ65 -
Floor Door Stop FS444
Floor Door Stop FS444
This door stop has been around a long time. We have been selling it for the past 35 years, and it is one of our best sellers year in and year out.
Features: Ideal for interior or exterior use. Cast brass construction. Accommodates door undercut up to 2-1/2". Non-marring rubber tip. Packed with expansion shield and lead shield. This Floor Mounted Door Stop is 3" high, and the base has a 2-1/2" diameter.
RB444HD- -
Floor Door Stop FS442
Floor Door Stop FS442
This Floor Mounted Door Stop used to go by the name Glynn Johnson GJFB19 or FB19. When Ingersoll Rand purchased H. B. Ives in the 1990's they brought it over under the Ives Floor Mounted Door Stop FS442. Features: Designed to blend well with all types of construction and provide a minimum of hindrance to cleaning efforts. Accommodates door undercut up to 2". Heavy-Duty cast brass or aluminum construction. Non-marring rubber bumper. This door stop has an overall height 2-7/8". Mounted shield and screws included.
GJFB19- -
4" Kickdown Door Holder FS544
4" Kickdown Door Holder FS544
The H.B. Ives FS544 Kick Down Door Holder has been a staple in schools for many years due to its heavy duty construction and inexpensive price. This is one of our most popular Kickdown Door Holder/Stop for the past 35 years. It is constructed of durable cast iron, which has great strength characteristics. The shoe is made of a non-marring rubber, which is replaceable. The shoe is also held in place with a screw, which makes it a great option in schools and area of high vandalism. This holder will work on door to floor clearances of 2" or less. The hole spacing is 7/8" x 1-9/16".
Made by H.B. Ives
GJL444-