Search results for: '1390 ingersoll rack panic door handle parts link'
-
International Door Closer 855P Series
The 855 has been discontinued. If you order it the 885 will be sent, it is the same door closer, but features back check.
The International Door Closer 855P Series is a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 48” interior or 42” exterior doors.
3/4" x 9-1/16" mounting holes
855- -
International Door Closer 885P Series
The International Door Closer 885P Series is a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features three adjustment valves for closing,latching speeds and one for back check. The cylinder is constructed of precision cast aluminum. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 48” interior or 42” exterior doors.3/4" x 9-1/16" mounting holes
885- -
International Door Closer 853P Series
The International Door Closer 853P Series is a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and whether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 32” interior or 28” exterior doors.
Direct replacement for the older style Norton 1602 and 1603, and Yale 52 and 53, that had the 3/4" x 8-3/16" mounting holes
853- -
International Door Closer 884P Series
The International Door Closer 884P Series is a very common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features three adjustment valves for closing,latching speeds and one for back check. The cylinder is constructed of precision cast aluminum. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 42” interior or 36” exterior doors.3/4" x 9-1/16" mounting holes
884- -
Dor-o-Matic 1990 Housing and 1090 2090 Inactive Housing DCX
The Dor-o-Matic 1990 Housing and 1090 2090 Inactive Housing DCX has been around since the early 1970's. Although it is now called a Falcon 1990, it is still the same device. This housing is also the inactive housing on the Dor-O-Matic / Falcon 1090 and 2090 panic hardware. The housing includes all of the interior springs, arm, and dogging screw. Housing measures 7-1/2" long by 1-3/16" wide. The center to center distance of the mounting studs is 6-1/4".
LEFT HAND SHOWN IN PICTURE
See diagrams for handing.
Doromatic part #
4270902784 - right hand dark brown
4270902782 - right hand aluminum
4270902785 -right hand black
4270902778- left hand dark brown
4270902776 - left hand aluminum
4270902779- left hand blackG199001 -
International Door Closer 883P Series
The International Door Closer 883P Series is a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features three adjustment valves for closing,latching speeds and one for back check. The cylinder is constructed of precision cast aluminum. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 32” interior or 28” exterior doors.
Direct replacement for the older style Norton 1602 and 1603, and Yale 52 and 53
3/4" x 8-3/16" mounting holes
883- -
International 8052-TP Delayed Action Door Closer
International 8052-TP Delayed Action Door Closer
The International 8052-TP Delayed Action Door Closer is same as the 8050 Series or 8051-TP, but with Delayed Action. Delayed Action is a function of the Door Closer hydraulic cylinder. The hydraulic cylinder will hold the door open for up to 30 seconds to allow physically challenged individuals time to get through the door way. Adjustable spring power with separate valves for closing, latching and delay
International Door Closer model # 8052-TP DU or 8052-TP AL
p>8052- -
Norton Door Closer Regular Arm
The Norton Door Closer Regular Arm is the standard arm that is shipped with the 9300, 1600, 8301, 8501 and 7500 door closers. It will also work with the Yale 2300, 50, 3301, 3501 and 4400 series door closers. This arm has had a bunch of different factory numbers over the years, including 1620-1, 7701-1 and 400-1.
16000- -
LCN Sentronic Door Closer Roller - 3034
The LCN Sentronic Door Closer Roller - 3034 is used on all of the LCN Track Closers, and Sentronic Closers. Nylon wheel is 1-1/16" diameter by 3/8" thick. The shaft is has a 1/2" diameter by 1-1/8" long. However in November of 2015 they started shipping the roller with the Slider 168 attached to it, with a retaining ring. LCN Started using this Roller Assembly in December 2018.
LCN part # 4040SE-3034
4040SE-3034 -
Plunger Door Holder / Stop FS1153
The Ives Plunger Door Holder / Stop FS1153 is manufactured by H.B. Ives and features a contemporary yet economical method of positive Hold-Open. This was another one of the Glynn-Johnson door stops that was merged in the H.B. Iver product line in the 1990's, and went by the 1153 part number. This door stop is constructed in sturdy cast aluminum for years of service. The spring operated plunger activates with minimal pressure, releasing instantly with a light tap on the plat-form lever. The stop has a 1-5/8" throw or projection for all types of doors. The ribbed non-marring rubber shoe is securely fastened to unit with a screw and is easily replaced when worn. These are sometimes called pop-up or push down stops. Ships with mounting screws.
Aluminum finish only
GJ1153M -
Floor Door Stop / Holder FS40
Floor Door Stop / Holder FS40
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF40A or F40A, and was brought over to the H.B. Ives line in the 1990's. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 1/2" or less
Holder Dimensions 3" Wide x 3-11/16" HighGJF40A- -
Floor Door Stop / Holder FS42
Floor Door Stop / Holder FS42
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF42A or F42A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS42. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 1-1/8" to 1-9/16"
Holder Dimensions 3" Wide x 3-11/16" HighGJF42A- -
Cal Royal 6600 Rim Device
The Cal-Royal 6600 Rim Device is a Grade 1 exit device. It is designed for doors that have at least a 4-1/2 inch stile width. The 36 inch device has a 32 inch actual length and can cut down 6" (24 inch actual). The 48 inch device has an actual length of 44 inches and can be cut down 12 inch (34 inch actual). Devices ships with 938 Strike and all the mounting screws.
CR6600- -
4" Kickdown Door Holder FS452
4" Kickdown Door Holder FS452
The H.B. Ives FS452 is another classic kick down door stop. It features a simple hold and release, activated with a touch of the foot, and is constructed of cast bronze or brass depending on the finish you are ordering. A simple stainless steel spring clip holds the stop in the up position. The non-marring rubber shoe is replaceable, and they have a corrugated bottom to prevent sliding on the floor and a secure grip. This stop is shipped with matching finish sheet metal screws. The 4" model is for door to floor clearances of 2" or less. The hole spacing is 19/32" x 1-47/64".
Ives Part # FS452
GJ452-4- -
International Door Closer 44CI Adjustable Spring Power
The International Door Closer 44CI Adjustable Spring Power is one of there heaver duty closers. It is designed to line up with the LCN 4040 hole spacing at more than half the price. It features a rugged cast iron body with a forged steel arm. It also uses all weather fluid, is non handed and is non sized, meaning you can adjust the door for any size door. The door closer we are selling here come with a regular arm and parallel arm bracket, so the closer can be mounted on the left or right, push, pull or top jamp. The closer has 4 adjustments, closing, latching, and back check valves, a long with a spring power adjustment.
44CI- -
Crash Chain Door Stop CS115
Crash Chain Door Stop CS115
- Specially designed for full-size exterior doors.
- Tear resistant, grey vinyl cover.
- Heavy duty compression spring assembled to both ends of chain
and end brackets. - Packed with sheet metal screws.
- Cast Brass brackets with solid, welded steel chain.
Available in 20-1/2", 25-1/2" and 30-1/2" lengths. Length is determined
by the location of your door closerPART # LENGTH
GCC205 20-1/2"
GCC255 25-1/2"
GCC305 30-1/2"GCC205- -
Corbin Russwin Hold Open Arm Parallel Bracket
The Corbin Russwin Hold Open Arm Parallel Bracket is the standard bracket shipped with the Hold Open Arm. This replacement bracket will work on the older Corbin 100, 110, and 120's, and the Russwin 2800, 2810 and 2820's. Along with the DC3210 and DC6210 Door Closers. This bracket used by the hold open arm for parallel arm applications only. Corbin Russwin part # 509F49.
2800HPA -
LCN 4040 Super Smoothee Door Closer
Standard 4040 LCN series closer shipped with regular arm, standard plastic cover, and self reaming and tapping screws. Non-sized cylinder is adjustable for interior doors to 5’0” and exterior doors to 4’0”. Closer mounts hinge side, top jamb, and parallel arm w/PA Shoe on either right or left swinging doors. Closers to meet ADA requirements.
No longer made, the 4040XP will be shipped in its place.
4040- -
5" Kickdown Door Stop FS452 | Ives FS452 Kick Down Door Holder
5" Kickdown Door Holder FS452
The H.B. Ives FS452 is another classic kick down door stop. It features a simple hold and release, activated with a touch of the foot, and is constructed of cast bronze or brass depending on the finish you are ordering. A simple stainless steel spring clip holds the stop in the up position. The non-marring rubber shoe is replaceable, and they have a corrugated bottom to prevent sliding on the floor and a secure grip. This stop is shipped with matching finish sheet metal screws. The 5" model is for door to floor clearances of 3" or less. The hole spacing is 19/32" by 1-47/64".
Ives Part # FS452
GJ452-5- -
International Door Closer 1802-P - Fixed Spring Closer
The International Door Closer 1802-P - Fixed Spring Closer is one of the heaviest duty closers in the International product line. It offers a 10 year warranty, and is Grade 1 rated, which is the highest rating you can have. The closer features three adjustment valves for closing,latching speeds and one for back check. The cylinder is constructed of precision cast aluminum. It ships with a regular arm and parallel arm bracket. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. This door closer is for use on doors up to 36” interior and is not recommended for exterior doors.
3/4" X 9-1/16" Hole Spacing
1802- -
Detex Advantex 10 Series Rim Device
Detex Advantex 10 Series Rim Device
The Detex 10 Series is a Super-Heavy-Duty panic device, built to with stand 1,000,000 cycles, twice the standard for Grade 1 rated devices. Designed for high-use and high-abuse environments. Non Handed with 1/4 turn hex dogging.
G10REO- -
Norton Traditional Door Closer 78 B/D
The Norton Traditional Door Closer 78 B/D is a door closer used in historic buildings. This is a replica of the original cast iron door closer used from the 1920’s to 1960’s. The new version is made of a cast aluminum alloy material, and should only be used when you are trying to keep historic designations. The hole spacing on this closer is 1-3/8" x 4-1/4”.
78B/D -
Jackson Door Closer Offset Arm - 20-900-LC
The Jackson Door Closer Offset Arm 20-900-LC is used with the 20-330 concealed closer for single acting offset mounted doors. The arm measures 12-15/16" long by 1/2" thick with a 1.012" offset. The track measures 25/32" deep by 29/32" wide by 14" long. The track includes the nylon slide, pin and retaining clips.
Jackson Part # 20-900-LC
G20900LC -
International Door Closer 9001-TP Series
The International Door Closer 9001-TP Series is a relatively newer closer. This closer features fully adjustable spring tension, closing and latching speeds and back check. The narrow design allows for mounting on the top jamb of store front doors without a drop plate. The closer is non handed, and can be mounted on the push, pull or top jamb positions. It meets all ADA requirements and is a Grade 1 closer, the heaviest rating possible.
3/4" X 11-3/32" Hole Spacing
9001P- -
Dor-o-Matic 1690 Panic Device
The design of the Doromatic 1690 is ideal for demanding, high-traffic applications. The vertical rods and latch mechanisms are concealed in the vertical door stile, ensuring trouble-free operation. Cast metal cover plates and end caps hold up to rigorous use. A quick, singlepoint dogging feature in the housing deactivates the device, permitting unrestricted traffic flow. The Doromatic 1690 may also be used to retrofit a Doromatic 1990 Series crossbar device.
Replacement parts are also available
Shipped with all screws and strikes. The 1690NL Cylinder Assembly (169CA) is required if you wish to use a key cylinder on the exterior, SEE RELATED PRODUCTS toward the bottom of the page.
1690EO -
International Door Closer Arm and Track 3020-VO
The International Door Closer Arm and Track 3020-VO is for offset top arm assemblies, with the track mortised in the top of the door. This track and arm are for the 7/8" depth of top rail application. Track measures 12-5/8" long by 1/2" high by 1-1/4" wide. For use with the 2000, 3000 and 5000 series concealed closers.
3010-VO -
Von Duprin 050046 98/99 Maintenance Kit
The Von Duprin 050046 98/99 Maintenance Kit has all the pieces and screws to keep your 98 or 99 device operating for years. Kit includes 17 pounds of replacement parts for the panic hardware and the outside trim.
Von Duprin part # 050046
G050046