Search results for: 'dorma swing door call door mill von'
-
Wall Door Stop WS443
The Ives Wall Door Stop WS443 has been a staple of the Ives product line for at least the last 45 years. The stop features cast brass construction and then plated the the desired finish, which makes it ideal for interior or exterior use. The rubber tip is a non marring rubber, that can be replaced and we keep in stock. The stop has a 2-1/4" base diameter and a 3-11/16" projection from the wall. This product ships with an expansion shield and lead shield.
RB443HD- -
Cal Royal Products 900 Series Door Closer
The Cal Royal Products 900 Series Door Closer is a unique one, it is the only closer that has the 3/4" x 11-1/8" hole spacing. We have seen a few versions of this closer, some have 6 mounting holes, and some have 4. If your closer has a spacing of 11-1/8", and has 3 holes on each size, this is the only closer I know of that is like that. The 900 Series is a Grade 1 closer, the heaviest duty rating possible. The door closer has adjustable spring tension, closing, latching and back check valves and is Barrier Free rated. The package comes with all of the mounting screws and a parallel arm bracket, so it can be mounted on the left, right, push, pull or top jamb for mounting.
900P- -
Von Duprin 8827 Bottom Latch Case 050461
The Von Duprin 8827 Bottom Latch Case 050461 is used on all Von Duprin 8827 non fire rated exits. A non fire rated device is one that has to positively latch every time it closes, you can usually tell, because a non fire rated device has the hex key dogging. Included mounting screws.
Von Duprin Part # 050461
Old part # 10175188VR170 -
Yale Door Closer 3301
The Yale Door Closer 3301 is constructed of a cast aluminum alloy. It is considered a Grade 1 Closer, which is the highest grade possible. The closer features an adjustable spring tension, and separate closing, latching and back check intensity valves. The slim line plastic cover is standard on this closer. This door closer replaces the older 3301BF closers. The new version is Barrier Free Complaint. The hole spacing is 3/4" x 12", the cylinder is sometimes cast 20-3301-1001 on the back of the cast aluminum cylinder. This closer ships with all of the mounting hardware and parallel arm bracket.
3300- -
Floor Door Stop Dome 1" Height FS436
Floor Dome Door Stop 1" Height FS436
We ship the H.B. Ives FS436 Floor Dome Stop, another product made by Ives that has been around for 50 plus years. Take a walk around a school made in the 1960's and you will probably find this door stop, or the hole were it used to be. This Dome Stop is used on doors without thresholds that have a bottom of the door to floor clearance of less than 5/8". The are constructed of cast aluminum or cast bronze depending on the finish you are looking for. The rubber stop is non-marring and replaceable. The stop has a base that is 1-3/4" x 2" oval, an overall height of 1" and a base height of 3/16".
GJFB13- -
Floor Door Stop / Holder FS42
Floor Door Stop / Holder FS42
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF42A or F42A, and was brought over to the H.B. Ives line in the 1990's and now goes by the part # FS42. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 1-1/8" to 1-9/16"
Holder Dimensions 3" Wide x 3-11/16" HighGJF42A- -
Von Duprin 6000 Series Solenoid Kit
The Von Duprin 6000 Series Solenoid Kit is used to replace burnt out solenoids on there 6000 series. To order determine the voltage and whether you have fail safe or fail secure.
Part # 050237 12 VDC (Fail Safe & Fail Secure)
Part # 050239 16 VDC (Fail Safe & Fail Secure)
Part # 050240 24 VDC (Fail Safe & Fail Secure)G0502xx -
4" Kickdown Door Holder Grand Standard
4" Kickdown Door Holder Grand Standard
Frequently we are asked, “What is the heaviest duty kick down holder you sell?” The answer to that question is any of Grand Specialty door holders. These door stops are American made and simply the best out there. They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg. They are constructed of steel, and not cast like all of the other door holders made.
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
- No roll pin at pivot point
- Mallable with a pair of pliers
- Rubber shoe held on by a screw
- American Made
- Zinc plated steel
The bottom mounting screws holes would be 3-3/8" to the Floor when mounted.
GJ604- -
Sargent Door Closer 1331
The Sargent Door Closer 1331 is a standard template closer with the 3/4” x 12” hole spacing. This closer is a great replacement for the Norton 8000 Series or Yale 3000 Series Door Closers. The closer is constructed of a cast aluminum body and has a heat treated steel pinion and rack. The 1331 has the ability to be mounted on the push, pull or top jamb, and is non handed. We stock the aluminum finish, but also have the dark bronze finish, it just might take an extra day or so. We ship the 1331-JUO.
1330- -
Back to Back Offset Door Pull 1.25 inch
Back to Back mounted Off-Set Door Pull featuring 1-1/4 inch stock diameter stock. Handle has a 4 inch offset with a 2 inch clearance and 3 1/4" projection. Available in 12 or 18 inch centers. Sold as sets, 2 handles and 3/8-24 thread stud.
Back to Back fasteners are for a 1-3/4 inch thick door, if your door is a different thickness, please let us know in the comments.
Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.
GHEM39xM39 -
Von Duprin 8827 Special Chassis Nut 050277
Von Duprin 8827 Special Chassis Nut 050277
The 8827 Special Chassis Nut goes on the ends of the 8827 Chassis Tie Rod. The Nut is threaded all the way through so the cover mounting screws can then be threaded on it also. The nut is 3/8" long by 1/4" hex.
Von Duprin Part # 050277
Old Von Duprin Part # 96065288VR190 -
Handicap Flush Door Pull 460
The 460 ADA Flush Pull measures 5 inches by 5 inches and is made of 1/8 inch material. The opening size is 3-1/2 inches by 3 inches. The pull is fastened to the door with 10-24 by 5/8 inch security torx with barrel nuts. The pull is designed for 1-3/4 thick doors, please specify if your door is thicker than 1-3/4 inches. Available in Brushed and Polished Stainless Steel and also Powder Coated Flat Black and Dark Bronze.
G460- -
Cal Royal Products 700 Series Door Closer
Cal Royal 700 Series Door Closer
Adjustable closing and latching speeds
holes spacing is 3/4" x8-3/16" for sizes 2 and 3, and 3/4 x 9-1/16" for the size 4. Size 2 is ideal for reduced power on interior doors, size 3 will be more powerful. Word of warning, the larger the spring size the harder it is to open the door.
Powder Coated Painted Finishes
5 year warranty720- -
Von Duprin 6114 24VDC Electric Strike
Von Duprin 6114 24VDC Electric Strike
Von Duprin 6100 Series electric strikes are designed for use with Rim devices. The 6114 has a 3/4” latch bolt throw, 7” face plate length, 1-7/8” width, and projects1-9/16”. The lock retrofits the Folger Adams FD 310-5. Other voltages and replacement parts are available.
FSE - Fail-secure. Requires power to be applied to unlock the strike lip. On loss of power, the strike lip is locked-Fire Rated
FS - Fail-safe. Requires power to be applied to lock the strike lip. On loss of power, the strike lip is unlocked. Non Fire-Rated.
VD6114 -
4" Kickdown Door Holder FS452
4" Kickdown Door Holder FS452
The H.B. Ives FS452 is another classic kick down door stop. It features a simple hold and release, activated with a touch of the foot, and is constructed of cast bronze or brass depending on the finish you are ordering. A simple stainless steel spring clip holds the stop in the up position. The non-marring rubber shoe is replaceable, and they have a corrugated bottom to prevent sliding on the floor and a secure grip. This stop is shipped with matching finish sheet metal screws. The 4" model is for door to floor clearances of 2" or less. The hole spacing is 19/32" x 1-47/64".
Ives Part # FS452
GJ452-4- -
Von Duprin 55 Hinge Case Spring 090052
The Von Duprin 55 Hinge Case Spring 090052 is the spring in the inactive case. This spring does all of the lifting of the cross bar, and is used on the 55 Rim, 5547 Concealed Vertical Rod and 5575 Mortise Device. It measures 1-5/8" long by 5/8" diameter.
Von Duprin part # 090052
55R200 -
8600 Adams Rite Concealed Vertical Rod
The Adams Rite 8600 Concealed Vertical Rod is designed for narrow stile aluminum framed glass doors. The device will fit on stile widths of 2" or more. We recommend this device for replacement only, modifying your existing door to this exit device will be labor intensive. The 8611 would be for the aluminum finish and the 8622 would be or the dark bronze finish. We try to keep the Aluminum and Dark Bronze in stock in the 36" and 48" devices.
This device is not Electrified, please call for the Electrified Model.
8600- -
Hager 5300 Series Door Closer
Hager 5300 Series Door Closer
Hager 5300 Series Grade 1 door closer is ideal for schools, hospitals, and other high abuse and high traffic environments. It is constructed of an aluminum alloy and provides smooth door control. The 5300 Series door closer is easy to install and maintain keeping your building safe and secure.
The Hager 5300 Series Door Closer body has a hole spacing of 3/4" x 9-1/6".
5300-