Search results for: 'yale 1790eo door cover replacement 8 3 4 link'
-
Floor Door Stop / Holder
The F20 or GJF20 was a mainstay of Glynn-Johnson for years. When the Glynn-Johnson door stop line merged with H.B. Ives it became the FS20. This door stop has been discontinued from Ives, but we have been able find a large stock. This Floor Mounted Door Stop also holds the door open, when in the latched position you can push the door and the holding latch will flip up and unlock thee holding clip. It is constructed of cast bronze or brass and then plated to your desired finish. This stop has a 2-1/2" long base that is 1-1/2" wide. The overall height is 3-1/8" with a 2-5/16" floor to rubber stop centerline. For use with door undercut up to 2-1/2".
GJF20- -
Door Sweep 1" Long Rubber
The Door Sweep 1" Long Rubber has an over height of 1-7/8", with 1" of it being the gray rubber seal. The mounting rail is constructed of extruded aluminum and is available in aluminum or dark brown finishes. This sweep ships with screws.
International Part # IDC-97V
IDC97V- -
International 8730S Narrow Design Surface Vertical Rod
The International Door Closer 8730S is designed for narrow stiles. The minimum stile width is 2-19/32 inches. It will not work on a true narrow stile door witch is usually 1-3/4 inch. The 36 inch version is 33-15/32 inches and the 48 inch version is 44-3/4 inches. The device is rated Grade 1, which is the highest rating. Rods are 1/2 inch diameter tubular with rod guides. The exit ships will all screws and strikes need for instillation.
8730S- -
HES 9400 Electric Strike
The 9400 series is a slim-line, surface mounted electric strike designed to accommodate rim exit devices with a 1/2" throw Pullman latchbolt. All components are completely encased within its 1/2" thick stainless steel housing, so no cutting on the frame is required for installation. Simply place the electric strike on the surface of the frame, align it with the exit latchbolt, and install. An 1/8" spacer plate is provided to accommodate varying door gaps. The 9400 exceeds Grade 1 standards for strength and performance. It is field selectable for fail secure or fail safe operation, and for 12 or 24 VDC. The 9400 features a smooth cover to conceal the mounting screws and provide a sleek surface for superior looks. Spacer Plate Included - the 9400 ships with one 1/8" spacer plate included in the box. Units ordered in a 630 finish are stainless steel. All other finishes have a black stainless steel spacer. Additional black spacer plates can be ordered as an accessory.
HES9400- -
Cal Royal 4400 Escutcheon Lever Trim
The Cal Royal Escutcheon 4400 Lever Trim is non handed (easily field reversible), thru-bolted, rigid non clutch lever for the 4400 Rim Device. The key locks or unlocks the lever. The Escutcheon measures 2-3/4 by 8-1/2 inches, the lever length is 4-3/4 inches. Ships with a 6 pin solid brass "C" keyway Rim Cylinder.
ESC44 -
Von Duprin Strike 1409 Blade Stop
The Von Duprin Strike 1409 Blade Stop is used on just about every Von Duprin Rim Device when door frame protection is needed. We see this strike on many Narrow Stile door setups. The strike measures 1-7/8" by 1-3/4" outside dimension. The strike has a projection of 1/2". The strike is constructed die cast metal and the blade is made of stainless steel.
Von Duprin Part # 1409
1409 -
Intermediate Hinge IP-2202 and IP-2201
Intermediate Hinge IP-2202 and IP-2201
Cast aluminum construction with steel bearings and axle. The set measures 3-1/2" tall with an 1-3/8" projection. This hinge is usually used an an intermediate hinge in between the top and bottom hinge.
Manufacture part # IP-2202 and IP-2201
IP-2202 is for Right Hand Doors
IP-2201 is for Left Hand DoorsGIP2201- -
Door Push Plate 89
The Door Push Plate 89 is drop forged plate that is .125" thick, and is made of Aluminum, Stainless Steel, Bronze or Brass, depending on the finish. The plate measures 3-1/2" wide by 15-3/4" long with a 1" projection. This plate is considered a combination push pull plate. Package ships with matching mounting screws.
GPH89- -
Handicap Saddle Threshold 513 - 5" Wide By 1/4" High
Saddle Threshold 513 - 5" Wide By 1/4" High
Extruded aluminum construction. The thresholds are shipped with mounting screws (#10 x 1-1/2" FH zinc plated wood screws), Milled aluminum finish. This is considered a Handicap Saddle Threshold.
Other sizes and finishes are available, call for more information.
Air shipment is not available on this product. Please allow 7-10 days for delivery.
513- -
Adams Rite End Cap
On this Adams Rite End Cap we sometimes find the number HX0471 cast into the Black Plastic construction. It measures 2-3/8" high by 1" deep, with a projection of 1-1/4". It is used on the 8099, 8100, 8200, 8300, 8400, 8500, 8600, 8700, 8800 and 8900.
Adams Rite Part # 25-0471-IP
G250471 -
Adams Rite Electrified 8800EL Panic Hardware
The Adams Rite 8800EL Electric Latch Retraction Panic Hardware is the same as the 8800, but with an internal solenoid to retract the latch-bolt. This is a very popular device in the Hotel Industry and is usually used in conjunction with a card reader.
The 8800 features the Starwheel locking bolt that interlocks door to the door frame. The 36" version is in stock, we can also get the 30", 42" and 48" devices, lead time is 2-3 weeks. This device is used exclusively on aluminum framed glass storefront doors. Replacement parts are available.
To order specify your Door Width, Color or Finish, and Voltage (12 or 24 Volt).
8800EL -
International 300 Series Adjustable Power Door Closer
The International 300 Series Adjustable Power Door Closer is one of there new closers to meet ADA requirements. With this door closer you can adjust the spring tension, closing and latching speed, even after it was installed. The Spring Power is adjustable all the way down to 8-1/2 pounds of resistance, making it ideal for areas with the elderly and children.
Hydraulic Cylinder only
3000-B-310 105 with Hold Open
3000-B-311 105 with No Hold Open
3000-B-312 90 with Hold Open
3000-B-313 90 with No Hold Open3000-B -
Corbin Russwin Hold Open Arm Parallel Bracket
The Corbin Russwin Hold Open Arm Parallel Bracket is the standard bracket shipped with the Hold Open Arm. This replacement bracket will work on the older Corbin 100, 110, and 120's, and the Russwin 2800, 2810 and 2820's. Along with the DC3210 and DC6210 Door Closers. This bracket used by the hold open arm for parallel arm applications only. Corbin Russwin part # 509F49.
2800HPA -
Wall Door Stop / Holder WS20
The Ives Wall Door Stop / Holder WS20 is another door holder from Glynn-Johnson. The Chicago based manufacture made these for 40 plus years. When they were purchased from H.B Ives and merged into there line they became the WS20. This holder is constructed of cast brass and then plated to your desired finish. The hinged holding clip can be released by a gentle pushing on the door, which causes the clip to flip up and release the door. The piece ships with wood screws and anchors.
GJW20- -
Roller Bumper Roller Only
One of the most common issues with Roller Bumpers and Gravity Type Coordinators is that the rubber wheel dries out and eventually falls off. With this Replacement Roller For Roller Bumper, you can now just change out the wheel. The wheel has 15/16" diameter and is 7/16" wide. The hub diameter is 3/16". This package ships with the wheel and a replacement axle that features a "fast rivet" head.
GJRB4R -
Von Duprin Thumb Piece 970488
The Von Duprin Thumb Piece 970488 is just the thumb piece only, rivet not included. Cast bronze construction, and then plated to the selected finish. 5-1/8" overall length, but note that the length is usually cut down in the field depending on the thickness of your door.
Von Duprin Part # 970488
Old Part # 960303G970488- -
Full Mortise Double Swinging Spring Hinge
Full Mortise Double Swinging Spring Hinge
Used mainly for commercial kitchen doors, or any commercial double swinging door. Sold in sets of 2 hinges, they will handle doors up to 75 lbs that are 1-3/4" thick. If you door weighs between 75 and 107 lbs, you should use 3 hinges. The door flange is designed for a standard 4-1/2" x 4-1/2" template mortise. Hinges ship with wood and metal mounting screws. They come in a standard Painted Primed Finish Gray.
The jamb flange is .100" thick, the door flange is .134" thick and the barrel diameter is 1.18".
GDA8145 -
Cal Royal 6600 Rim Device
The Cal-Royal 6600 Rim Device is a Grade 1 exit device. It is designed for doors that have at least a 4-1/2 inch stile width. The 36 inch device has a 32 inch actual length and can cut down 6" (24 inch actual). The 48 inch device has an actual length of 44 inches and can be cut down 12 inch (34 inch actual). Devices ships with 938 Strike and all the mounting screws.
CR6600- -
Von Duprin 050190 Bottom Fitting for the 5654 / 5754
The Von Duprin 050190 Bottom Fitting is for the 5654 / 5754 Mullions. The package includes the bottom fitting and all of the fasteners. The Fitting measures approximately 11/16" wide on face closest to the door and 2-3/8" at the widest point. The depth is 3-7/8"
Von Duprin part # 050190
G050190- -
Von Duprin 9927 Panic Device
Von Duprin 9827/9927 surface mounted vertical rod device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The Von Duprin 9827 device has a smooth mechanism case and the Von Duprin 9927 device has a grooved case. The surface vertical rod device is non-handed.
9927EO- -
Falcon 25-V Vertical Rod Panic Device
Falcon 25-V Vertical Rod Panic Device
The Monarch Falcon 25-V is designed for high-traffic applications were added strength and durability are required. The device includes all strikes and mounting screws required for installation. Available in 3' and 4' devices, the 3' device is for doors 30" to 36", the 4' device is for doors that are 37" up to 48" wide. The vertical rods furnished with this device are for doors up to 7' tall, if your doors are taller, please contact us.
G25VEO- -
Global DoorTC4361 Door Closer
The Global Door Closer TC4361 is recommended for use on heavy duty commercial, architectrual and institutional applications. It is ideal for business, new construction and renovations. It has a full selection of accessories to accomodate the requirements of any field installation. It is tri-packed standard and comes with all fasteners, brackets and soffit plates for versatility. Closers with non-hold open arms are UL listed for "A" label fire doors. Fully compliant with opening force requirements for ADA and ANSI/BHMA standards.
Options: Specify when Ordering- Finish - AL, DU
The hole spacing is 1" by 7-1/2"
TC4361-