Search results for: 'hing used on swinging doors for kitc'
-
Falcon / Dor-o-Matic EL2390 Panic Hardware
Effective December 20, 2024 the EL2390 has been discontinued. Falcon Doromatic is working on retro-fit plates to work with the MEL1690.
Doromatic EL2390 Exit Device
The EL2390 is a Grade 1 exit device designed for high use and abuse, and delivers a variety of performance features that ensure smooth, easy and reliable operation. We only recommend this device when you have an existing 2390, that your want to control access to with either a card reader or inside button. Easier rod adjustment simplifies installation. This device is for replacement of older worn out Falcon / Dor-o-Matic 2390's. This is not a good exit device to use to replace devices from different manufactures.To order specify:Door Width:42" (Device size has a 21" Touchbar)
48" (Device size has a 24" Touchbar)Color:
Aluminum
Dark Bronze
Device Centerline to Finished Floor Measurement in inches:EL2390EO- -
Detex ECL-230D Alarmed Panic Device
The Detex ECL-230D Alarmed Exit Device is a battery operated, rugged deadbolt panic device. The steel paddle is photo-luminescent sign providing managed security and a 100 decibel alarm for secondary exits. The device features a single point 1" dead bolt, attack resistant design withstands over 2200 pounds of outside pull force and is non handed. Locking and unlocking the dead bolt always arms and disarms the alarm. Rim Cylinder is not included.
If you have a door that requires Panic Hardware, then use the ECL-230D-PH
ECL230D- -
Anodized Black Aluminum Door Kick Plate 315AN
The Anodized Black Aluminum Door Kick Plate 315AN are a flat black and match the black color we find on Storefront doors. These plates have an aluminum base metal, which is 18 gauge (.040") thick that is then Anodized in the Black Color. These plates relatively inexpensive. Custom sizes are available, they run about $0.25 per square inch.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. This is fine on the Brass and Aluminum base metals, but again Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
GKP-BLK -
Door Pull Plate 5810 | Heavy Duty Pull Plate
The Door Pull Plate 5810 is 7/32" thick forged plate made of solid aluminum, brass or stainless steel depending on the finish. The Door Pull GHE10, handles come with thru bolts and finish washers. The plate has counter sunk holes and sheet metal screws for mounting. 3-1/2 x 15 inch plate only.
GPL5810- -
Door Push Plate 89
The Door Push Plate 89 is drop forged plate that is .125" thick, and is made of Aluminum, Stainless Steel, Bronze or Brass, depending on the finish. The plate measures 3-1/2" wide by 15-3/4" long with a 1" projection. This plate is considered a combination push pull plate. Package ships with matching mounting screws.
GPH89- -
Door Push Plate 60
The Door Push Plate 60 has the classic half round design. The plate measure 8" wide and 16" tall, and is constructed of 16 gauge metal, which is .050" thick. This plate is similar to the GPH59 (Push Plate 59), but is a 1/2" wider and 1" taller. This plate ships with the matching finish screws.
Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.
GPH60- -
Von Duprin 050135 Top Fitting and Cover for 5654 / 5754
The Von Duprin 050135 Top Fitting and Cover is for use on there 5654 / 5754 Mullions. Package includes the Top Fitting and Cover, and all of the fasteners. The Fitting measures approximately 11/16" wide on face closest to the door and 2-3/8" at the widest point. The depth is 3-1/8"
Von Duprin Part # 050135
G050135- -
Offset Pull Handles mounted Back to Back
The Door Pull Offset #39 Handle is constructed of either solid aluminum, brass or stainless steel. The handle is 1" diameter tubing with a 2-3/4" offset and 2-3/4" projection. This is the most common type of handle you use today. Just about every aluminum framed storefront door has a version of this handle. This handle is available in 8", 10", 12" and 18" centers on the mounting holes. The back to back mounting is for Metal or Wood Doors that are 1-3/4 thick. Included fastener is threaded into one of the handles, and the Stud End has fits into the inside handle and is held in place by a set screw on the handle.
Package includes two offset pull handles and fastening hardware. Shown in Polished Stainless Steel with 12 inch centers.
Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks.
GHE39x39 -
Von Duprin 2227/3327A/9927 Top Latch 050400
The Von Duprin 050400 Top Latch is used on the 2227, 3327A, 3427A, 9827 and 9927 exit devices. It is used the Fire-Rated along with the standard Panic Devices. The 050400 is sold without the the Mounting Bracket, if you need the Mounting Bracket you can order the 050546, or order the G99VR10 (050091) which will come with the Bracket. This latch is for use on devices shipped after October 1998. This is usually the problem if your bottom rod is dragging on the floor. Includes screws.
Von Duprin Part # 050400
G050400 -
Brushed Stainless Steel Door Kick Plate-14 Gauge .062
The Brushed Stainless Steel Door Kick Plate 14 Gauge .062 is the heaviest duty plate we offer . Stainless steel offers one of the best material for commercial applications. They are very hard, and do not dent easily. The also offer the best corrosion resistances out there. We use only type 304 stainless.
Stainless Steel Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.40 per square inch depending quantity
Please allow 1 week shipping time
GKP-US32D-14ga -
Von Duprin Panic Device 990NL Trim
The Von Duprin Panic Device 990NL Trim is known as a Night Latch Trim. This plate mounts on the exterior of the door, and the welded on mounting studs line up with the 99 device on the interior of the building. The key locks and unlocks the interior exit device. If you have a different manufacture or a different Von Duprin series on the interior, it will not line up. On the back of this plate we usually find the number 990 stamped on it. The plate shown here is for the Rim and Surface Vertical Rod 99 and 98 devices. If you have a Mortise or Concealed Vertical Rod, call us and we will order that model. The plate measures 3" wide by 14-3/16" tall. Order here for the 990NL-R&V. The key cylinder is sold separately.
99NL -
Clear Plastic Door Kick Plates
The Clear Plastic Door Kick Plates are constructed of .125" thick acrylic. We recommend screw mounting on these plate, because you can see right through them, and would be able to see the Tape Mount or Glue. We have the more common sizes listed, but If you need a custom size they run about $0.22 per square inch.
GKP-CP -
Von Duprin EL99 Panic Device Only
This is the same trusted Von Duprin 99 with Electric Latch Retraction, also known as EL.
The EL feature allows for the remote unlatching of exit devices. A control station operator can flip a switch to retract the latch bolt and immediately change an exit door to push-pull operation. A powerful, continuous duty solenoid retracts the latch bolt, either for momentary unlatching, or for extended periods of time. The EL feature is an alternative to manual dogging.
EL devices are also useful with automatic door operators, and may be applied to fire-rated applications when under the control of an automatic fire alarm system.
UL approved for Class II circuit applications.
The EL option does not include the power transfer from door to frame, the power supply, or the control operator. Refer to EPT-2 power transfer and the PS914 power supply.
The PS914 with the 9002RS option card is the minimum option card required. Other option cards available for other functions, see PS914 power supply for additional information.
Ships with all the mounting screws and the 299 Strike.
EL99EO-Door Push Plate 59
The Door Push Plate 59 has the classic half round design. The plate measure 7-1/2" wide and 15" tall, and is constructed of 16 gauge metal, which is .050" thick. This plate is similar to the GPH60 (Push Plate 59), but is a 1/2" more narrow and 1" shorter. This plate ships with the matching finish screws.
Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.
GPH59-2390 Falcon Dor-o-matic Anchor Block Assembly
The Doromatic 2390 Anchor Block Assembly is used to connect the push bar to the device channel.
Discontinued December 2024
G2390ABSVon Duprin 050500 88 Latch Tail Kit
Von Duprin 050500 88 Latch Tail Kit
The Von Duprin Part # 050500 includes the 1 Latch Tail, 2 Latch Tail Rivets, and 2 Latch Tail Springs. This product is used on the Von Duprin 88 Rim Device, for the EO, NL, TP and DT functions. This is not the Latch Tail Kit used on the Fire Rated Von Duprin 88-F Devices.
Von Duprin Part # 050500
G050500Door Push Plate 58
The Door Push Plate 58 is the only plate we have that is a forged plate. The forging process involves heat and pressure or pounding. The result is a very heavy and durable metal. This plate measures 3-1/2" wide by 15" tall, with a thickness of 7/32". This is one of the thickest plate we offer, and is the most sturdy.
GPH58-International Door Closer 8610S Rim Device-Grade 1
International 8610S Rim Device-Grade 1
DC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.
Non handed, 4-1/2" minimum stile width. Smooth Surface.
8610S-