Search results for: 'hager 520 series door closers installation guard'
-
Command Access MLRK1-VD22 Motorized Latch Retraction for Von Duprin 22
The Command Access MLRK1-VD22 is a motorized electric latch retraction with REX for the Von Duprin 22. This motor is 24 to 28 volts and has a Standard : 900 mA (Avg Current Peak); 215 mA (Avg Current Hold). This unit requires 18 ga wire. And ships with (1) Motor Mount with MM5; (2) 40002 - 8/32 x 1/4 inch Phillips Head Screw; (1) 50030 8/Lead with vd Connector; (1) 50944 Molex Pigtail; (1) 40144 Dogging Hole Cap; (1) 50991 Fire Rated Drilling Template; (1) Replacement Dogging Tail Piece.
The MLRK1-VD22 is a cost-effective and straightforward way to upgrade your Von Duprin 22 series device to motor-driven latch retraction in the field. UL Listed + 3 Year Warranty
MLRK1-VD22 -
Door Push Plate 89
The Door Push Plate 89 is drop forged plate that is .125" thick, and is made of Aluminum, Stainless Steel, Bronze or Brass, depending on the finish. The plate measures 3-1/2" wide by 15-3/4" long with a 1" projection. This plate is considered a combination push pull plate. Package ships with matching mounting screws.
GPH89- -
Door Push Plate 60
The Door Push Plate 60 has the classic half round design. The plate measure 8" wide and 16" tall, and is constructed of 16 gauge metal, which is .050" thick. This plate is similar to the GPH59 (Push Plate 59), but is a 1/2" wider and 1" taller. This plate ships with the matching finish screws.
Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.
GPH60- -
Anodized Black Aluminum Door Kick Plate 315AN
The Anodized Black Aluminum Door Kick Plate 315AN are a flat black and match the black color we find on Storefront doors. These plates have an aluminum base metal, which is 18 gauge (.040") thick that is then Anodized in the Black Color. These plates relatively inexpensive. Custom sizes are available, they run about $0.25 per square inch.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. This is fine on the Brass and Aluminum base metals, but again Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
GKP-BLK -
Clear Plastic Door Kick Plates
The Clear Plastic Door Kick Plates are constructed of .125" thick acrylic. We recommend screw mounting on these plate, because you can see right through them, and would be able to see the Tape Mount or Glue. We have the more common sizes listed, but If you need a custom size they run about $0.22 per square inch.
GKP-CP -
Door Push Plate 59
The Door Push Plate 59 has the classic half round design. The plate measure 7-1/2" wide and 15" tall, and is constructed of 16 gauge metal, which is .050" thick. This plate is similar to the GPH60 (Push Plate 59), but is a 1/2" more narrow and 1" shorter. This plate ships with the matching finish screws.
Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.
GPH59- -
Door Push Plate 58
The Door Push Plate 58 is the only plate we have that is a forged plate. The forging process involves heat and pressure or pounding. The result is a very heavy and durable metal. This plate measures 3-1/2" wide by 15" tall, with a thickness of 7/32". This is one of the thickest plate we offer, and is the most sturdy.
GPH58- -
Wall Door Holder/Stop 531
The Wall Door Holder/Stop 531 features cast brass or bronze finish which is then plated to the desired finish. This is considered a manually operated door holder, because it does not latch automatically. It features a 2-1/2" base with 3-5/8" projection, and ships complete with all of the needed fasteners.
GJ531- -
Wall Door Stop / Bumper Heavy Duty Convex WS402CVX
The Ives WS402CVX Wall Door Stop is our heaviest duty wall stop of this design. They are constructed of a heavy duty cast brass base that is then plated to your desired finish. The wall stop is 2-1/2" in diameter and has a 1" projection. It features a special retainer cup that makes the rubber tamper resistant. This stop ships with screw and drywall anchor.
GJ50C- -
Wall Door Stop WS11
The WS11 door stop used to be under the Glynn-Johnson product line as the WB11 until they merged with H.B. Ives. At that point they became the WS11. This stop only is constructed of cast brass and then plated to your desired finish. The stop has a 2" diameter base and projects from the wall 3-3/4". This particular model is the same as the WS11x, except that it is designed for wood or drywall mounting and ships with wood screws and anchors.
GJWB11- -
Wall Door Stop / Holder WS445
The Ives Wall Door Stop / Holder WS445 has been a staple of the Ives product line for at least the last 45 years, and is the same product as the WS443 except it has a holder function. The stop features cast brass construction and then plated the the desired finish, which makes it ideal for interior or exterior use. The rubber tip is a non marring rubber, that can be replaced and we keep in stock. The stop has a 2-1/4" base diameter and a 3-11-16" projection from the wall. This product ships with an expansion shield and lead shield. This holder is considered a manually holder due to the fact you have to bend over and latch and unlatch it.
GJW27- -
Wall Door Stop / Bumper Heavy Duty Concave WS401CCV
The Ives WS401CCV Wall Door Stop is our heaviest duty wall stop of this design. They are constructed of a heavy duty cast brass base that is then plated to your desired finish. The wall stop is 2-1/2" in diameter and has a 1" projection. It features a special retainer cup that makes the rubber tamper resistant. This stop ships with screw and drywall anchor.
GJ60C- -
Oil Rubbed Bronze Door Kick Plate
Our Dark Bronze Oil Rubbed Bronze Door Kick Plates (US10B) are a baked on powder coat on brass base metal. We switched to this finish 5 years ago due to color variations in the US10B Oil Rubbed Bronze finishes. The US version was much lighter than the Asian version, which is where most the door hardware is made these days. The cost of Oil Rubbing was going through the roof and many platers were having issue with the environmental impact and EPA regulations in the United States. Our Oil Rubbed Kick Plates are 16 gauge (.050″) thick.
Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut dark brown screw. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates, it is not recommended. Large plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and some C Clamps with the door on saw horses.
Custom sizes available starting around $0.49 per square inch depending quantity
Please allow 2 week shipping time
GKP-DB -
Door Push Plate 61
The Door Push Plate 61 is constructed of 16 gauge stainless steel, aluminum, brass or bronze. This plate is handed left and right, the one shown on the website is a Left Hand plate. They measure 7-1/2" wide by 15" long, and ships with the matching finish mounting screws.
GPH61 -
Lifetime Brushed Brass Door Kick Plate
The Lifetime Brushed Brass Door Kick Plates are the same as the Lifetime Polished Brass Door Kick Plates, solid stainless steel base metal, 16 gauge (.050" thick), but the surface is Satin or Brushed. Because it is an artifical finish they will not tarnish. Custom sizes available starting around $0.41 per square inch depending quantity. Kick Plate comes with screws for mounting. Please allow 1 week shipping time.
GKP-BB -
Door Pull Plate 5020
The Door Pull Plate 5020B is constructed of .050" wrought metal, in either solid aluminum, brass or stainless steel, with Door Pull GHE20 -8" center. Handles come with thru bolts, finish washers and the plates come with sheet metal screws that fit the countersunk holes.
GPL20B -
Duranodic Aluminum (Dark Brown) Door Kick Plate
The Duranodic Aluminum (Dark Brown) Door Kick Plates are dark bronze or brown and match the Dark Brown color we find on Storefront doors. These plates have an aluminum base metal, which is 18 gauge (.040") thick that is then Anodized in the Dark Brown Color. These plates relatively inexpensive. Custom sizes are available, they run about $0.25 per square inch.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. This is fine on the Brass and Aluminum base metals, but again Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
GKP-xxxDB -
Door Pull Plate 5010
The Door Pull Plate 5010 is .050" wought solid aluminum, stainless steel, or brass depending on the finish. The Door Pull GHE10, handles come with thru bolts. The plate has counter sunk holes and sheet metal screws in matching finish.
3" x 12" GPL312
3.5" x 15" GPL315
4" x 16" GPL416GPL10 -
Lifetime Polished Brass Door Kick Plate
The Lifetime Polished Brass Door Kick Plate has a 16 gauge (.050″ thick) base metal, that is then plated with a artificial brass finish that is then polished. The process is called Poly Vapor Deposition or PVD, which is why we hear the name Lifetime Polished Brass Kick Plate PVD. Because the finish is an artificial brass, it does not have to be clear coated, so it will never tarnish. The Lifetime Polished Brass finish cost the same as the Solid Brass Polished Kick Plates.
Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut brass screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″. You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes, but they are made of Stainless Steel, which is a tough metal to drill. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.40 per square inch depending quantityPlease allow 1 week shipping time
GKP-US3-PVD -
Door Pull Plate 5021
The Door Pull Plate 5021 is a .050" solid wought plate in either aluminum, brass or stainless steel depending on the finish. The Door Pull GHE21 has 6" centers, handles come with thru bolts. The plates are pre drilled with counter sunk holes and come with sheet metal screws.
GPL21A- -
TH1100-HK1 Deluxe Hinge Kit
The TH1100-HK1 is the perfect solution for existing hinges that have failed, and is a quick and easy fix for compromised door openings. Deluxe Hinge Kit TH1100-HK1 comes in a package of two hinges, 2 1/4" shims, and 12 one-way mounting screws. The hinges are non handed, will work on Flush, and 1/8" offset door applications, have a self lubricating pin that rotates on anti-friction bearings, and have a vertical adjustment screw. They are constructed of an aluminum alloy.
TH1100HK1- -
Lifetime Satin Nickel Door Kick Plate
Lifetime Satin Nickel PVD Door Kick Plate
The Satin Nickel is a popular finish we have been seeing the last 15 years. These plates are 16 gauge or .050″ thick.
The Lifetime Satin Nickel Door Kick Plate has a 16 gauge (.050″ thick) base metal, that is then plated with a artificial satin finish that is then brushed. The process is called Poly Vapor Deposition or PVD, which is why we hear the name Lifetime Satin Nickel Kick Plate PVD. Because the finish is an artificial satin nickel, it does not have to be clear coated, so it will never tarnish.Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″. You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.49 per square inch depending quantity
Please allow 1 week shipping time
GKP-SN -
Brushed Bronze Door Kick Plate
The Brushed Bronze Door Kick Plates are solid bronze plates that are finished in a Satin or Brushed finish and then clear coated. The Bronze Kick Plates are similar to the Brass Kick Plates, but they have more of an orange hue, were as the brass plates have a yellow hue. This was a very popular finish in the 1950's, 60's and early 70's. Custom sizes are available starting around $0.49 per square inch depending quantity. Kick Plates come pre drilled with screws. Please allow 2 week shipping time.
GKP-US10 -
Gold Aluminum Door Kick Plate
The Gold Aluminum Door Kick Plate are constructed of .040" thick aluminum base material that is then anodized to a polished brass finish. These plates are a great alternative to the Solid Polished Brass and Lifetime Brass kick plates. Custom sizes are available, they run about $0.24 per square inch or less. Ships with matching Phillips type sheet metal screws.. Please allow 7-10 days for delivery
.GKP-Gold Aluminum -
Polished Brass Door Kick Plate
Solid brass kick plate, polished to mirror finish. We can no longer get the solid brass plates, the lifetime polished brass will be shipped in its place.
The standard Polished Brass Door Kick Plate is a solid brass kick plate that is polished and then clear coated to prevent oxidation. These plates are 16 gauge or .050″ thick. A draw back of the Polished Brass Plates is oxidation. If the plate becomes scratched or dented, there is a good probability that the clear coat delaminates and moist could get under the surface. When this happens, the plate will tarnish. The brass base material is softer, so the chances of them becoming scratched or dented in commercial applications is pretty high.
Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut brass screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″. You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
I would highly recommend the Lifetime Brass if these plates are going to be mounted outside. Solid brass is soft, and tends to dent easily and the clear coat can be compromised. The Lifetime Brass plates do not require a clear and will last a lot, lot longer!
Custom sizes available starting around $0.40 per square inch depending quantity
GKP-polished-brass -
Door Push Plate 62
The Door Push Plate 62 is constructed of 16 guage (.050") thick aluminum, stainless steel, brass or bronze depending on your finish. They measure 7-1/2" by 15" tall. This plate is handed left and right, the one shown on the website is a Left Hand. Plate comes with matching finish mounting screws.
GPH62- -
Diamond Plate .125 Aluminum Door Kick Plate
The Diamond Plate Aluminum Door Kick Plate are solid aluminum. They are 1/8" thick and have a gloss or polished finish. These plates have the Diamond pattern, and the diamonds are 1-1/8" long. Custom sizes are available, they run about $0.39 per square inch. The lead time on these plates is about 7-10 days.
GKP-DP -
Brushed Stainless Steel Door Kick Plate-14 Gauge .062
The Brushed Stainless Steel Door Kick Plate 14 Gauge .062 is the heaviest duty plate we offer . Stainless steel offers one of the best material for commercial applications. They are very hard, and do not dent easily. The also offer the best corrosion resistances out there. We use only type 304 stainless.
Stainless Steel Kick Plates can be mounted by screws, two way tape, and they can be glued to the door. Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut Stainless Steel screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
Custom sizes available starting around $0.40 per square inch depending quantity
Please allow 1 week shipping time
GKP-US32D-14ga -
Door Pull Plate 5025
The Door Pull Plate 5025 is a solid .050" wought plate of solid aluminum, brass or stainless steel depending on the finish. The Door Pull GHE25 has 6" centers and is constructed of solid aluminum, brass or stainless steel, and is 3/4" in diameter, handles come with thru bolts. The plate come predrilled with counter sunk holes and sheet metal screws in matching finiish. This is one of our most popular plates sold.
GPL25A- -
Door Pull Plate 5026
The Door Pull Plate 5026 is a solid .050" wought plate of solid aluminum, brass or stainless steel depending on the finish. The Door Pull GHE26 has 8" centers and is constructed of solid aluminum, brass or stainless steel, and is 1" in diameter, handles come with thru bolts. The plate come predrilled with counter sunk holes and sheet metal screws in matching finiish.
GPL26BW- -
Von Duprin 9927 Top Vertical Rod 110573
The Von Duprin 9927 Top Vertical Rod 110573 is the standard top rod for door heights up to 7'1". The length of this rod is 35", less the fittings. For larger doors you can order a Rod Extension Kit, which at this point we do not have online. The rod is field adjustable if your doors are less then 7'1". The Old Von Duprin part # is 110573, and the Newer Von Duprin part # is 050512.
G99VR30- -
Corbin Russwin ED4200 Panic Device
Corbin Russwin ED4200 Narrow Stile Exit Device
This device is designed for use with a narrow framed glass door, and is recommend for use in high traffic, abusive areas.Device
non-handed.
Trim handed.
Easily field cut to size.
Standard: 36" bar fits 30"- 36"
914mm) door.
Stile
Minimum width 2" (51mm).Replacement parts are also available
ED4200- -
Trim Protector Bar
Trim Protector Bar
A great product for applications were your door knobs and levers are getting damaged due to hand carts and other items hitting door trim. Mount this product above or below existing items on walls and doors to protect and sheild them from damage.
Material: Brass, Bronze, Stainless Steel
Material Size: 3/8" x 1-1/2"
Base: 1-3/4" x 3-1/2"
Projection: 3-1/4"GA111-