Search results for: 'holder case pull plate good'
-
Wall Door Holder/Stop 531
The Wall Door Holder/Stop 531 features cast brass or bronze finish which is then plated to the desired finish. This is considered a manually operated door holder, because it does not latch automatically. It features a 2-1/2" base with 3-5/8" projection, and ships complete with all of the needed fasteners.
GJ531- -
Door Step N Pull
Step N Pull®
Stop the spread of germs with this ingenious product. Simple step on the plate and pull the door without grabbing the door pull.
Includes:
- One StepNpull®
- Required mounting screws
- Two stickers, one for the door and the other for the mirror, paper towel dispenser or hand dryer. Actual dimensions are 5"x4"
Currently we only have Aluminum in stock.
Available in Aluminum, Gold or Copper Finish-See Color under "More Views"GSNP- -
Handicap ADA Hands-Free Door Pull BM4511
The Handicap ADA Hands-Free Door Pull BM4511 is an ADA compliant. You can hook your forearm/wrist into the open end to open a non-latching door. The pull is constructed of stainless steel and is available in brushed stainless steel, powder coated flat black or powder coated dark bronze. The plate measures 4 x 16 inches and the grip is tack-welded to the plate and also has a 5/16-18 thread for thru bolting. The grip is 1-1/4 diameter by 8 inches. Ships with 6 mounting screws and one 5/16-18 thru bolt with finished washer in matching finish.
GBM4511- -
Norton Door Closer 7700 Series Power Track
The Norton Door Closer 7700 Series Power Track combine the functions of a single point electromechanical door holder with the proven reliability of a 7700 Series Door Closer. The track assembly contains an arm slide and solenoid operated hold open mechanism and is available with or without an integral smoke detector. The closer is mounted on the door. The Power Track and hook-up box are mounted to the frame face for pull side installations or the frame soffit for push side installations.
Two versions, the Master Unit (PTDO) and the Support Unit (PTO). The PTDO has an integral smoke detector. The PTO can be plugged into the PTDO or into your existing fire alarm system. Both units can be mount pull side of the closed door, or the push side, please specify when ordering. Specify voltage (24 volt or 120 volt) and color (aluminum or dark brown). Dark Brown is a 3 week lead time, Aluminum is in stock.The PTDO Master Unit is no longer available, they were discontinued in the 2024.
7705PTO- -
Floor Door Stop / Holder FS446
Floor Door Stop / Holder FS446
The Ives FS446 Door Stop and Holder is a modification of the FS444, which is the non holder version. It is considered a manual type floor holder, because you have to manually latch the holder for it to hold the door open. It is constructed of cast bronze or brass, and is no longer available in a cast aluminum. It is designed for doors with up to 2-1/2" of undercut, meaning the distance between the finished floor and the bottom of the door. It measures 3-3/4" overall height with a 2-1/2" diameter, and the distance from the base to the center line of the rubber non-marring stop is 2-1/2". This stop is packed with expansion shield and lead shield.
GJF26- -
8" Kickdown Door Holder Grand Standard
8" Kickdown Door Holder Grand Standard
Frequently we are asked, “What is the heaviest duty kick down holder you sell?” The answer to that question is any of Grand Specialty door holders. These door stops are American made and simply the best out there. They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg. They are constructed of steel, and not cast like all of the other door holders made.
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
- No roll pin at pivot point
- Mallable with a pair of pliers
- Rubber shoe held on by a screw
- American Made
- Zinc plated steel
The bottom mounting screws holes would be 7-3/8" to the Floor when mounted.
Made by Grand Specialties 608z
GJ608 -
12" Kickdown Door Holder Grand Standard
12" Kickdown Door Holder Grand Standard
Frequently we are asked, “What is the heaviest duty kick down holder you sell?” The answer to that question is any of Grand Specialty door holders. These door stops are American made and simply the best out there. They have a shoe that is held in place by a screw, a rivet instead of a roll pin for the hinging mechanism, and a “wedge” instead of a piece of spring steel to hold up the leg. They are constructed of steel, and not cast like all of the other door holders made.
Another feature is their well constructed rubber shoe can be adjusted down as the rubber shoe wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
- No roll pin at pivot point
- Mallable with a pair of pliers
- Rubber shoe held on by a screw
- American Made
- Zinc plated steel
The bottom mounting screws holes would be 11-3/8" to the Floor when mounted.
Made by Grand Specialties in USA Part # 612z
GJ612 -
Wall Door Stop / Holder WS45
The Ives Wall Door Stop / Holder WS45 was introduced about 50 years ago as the Glynn-Johnson W45A or GJW45A. When they were purchased by H.B. Ives, it became the WS45. They are constructed of cast Brass or Bronze and then plated to the desired finish. This door stop is unique because the wall does not have to be parallel to the door for it to latch and hold the door open. Spring loaded roller rides up the face of the strike, seating itself on the strike, holding the door firmly in the open position. A heavy rubber pad cushions the shock and absorbs the sound. With unit mounted on door and the strike on wall, vertical adjustment is available on body. The strike is adjustable 45 degrees left or right, both adjustments easily accomplished at time of installation or at a later date. WS45 strike is furnished with wood screws for drywall mounting.
GJW45A- -
Von Duprin 88 End Case 050435
The Von Duprin 88 End Case 050435 is also known as the hinge case, meaning it is on the hinge side of the door. This End Cap is used on all of the Von Duprin 88 models, which include 88, 8827, 8847 and 8875. This piece does all the lifting of the cross bar, so it is an important component. The case includes the all of the internal workings and springs.
Von Dupin Part # 050435
88R20 -
Polished Brass Door Kick Plate
Solid brass kick plate, polished to mirror finish. We can no longer get the solid brass plates, the lifetime polished brass will be shipped in its place.
The standard Polished Brass Door Kick Plate is a solid brass kick plate that is polished and then clear coated to prevent oxidation. These plates are 16 gauge or .050″ thick. A draw back of the Polished Brass Plates is oxidation. If the plate becomes scratched or dented, there is a good probability that the clear coat delaminates and moist could get under the surface. When this happens, the plate will tarnish. The brass base material is softer, so the chances of them becoming scratched or dented in commercial applications is pretty high.
Our plates come standard with screw mounting. The manufacture sends #6 x 5/8″ Oval Phillips Undercut brass screws. The number of holes on the screw mounted plates is determined by an industry wide standardize template. A height between 6-10″ will have 10 holes for plates up to 33″ and 12 holes for plates between 33 and 40″. You can order these plates with tape mounting, but on larger plates, it is not recommended, the plates are too heavy and they most likely will not stick. We can also ship them with no holes. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
I would highly recommend the Lifetime Brass if these plates are going to be mounted outside. Solid brass is soft, and tends to dent easily and the clear coat can be compromised. The Lifetime Brass plates do not require a clear and will last a lot, lot longer!
Custom sizes available starting around $0.40 per square inch depending quantity
GKP-polished-brass -
Floor Door Stop / Holder
The F20 or GJF20 was a mainstay of Glynn-Johnson for years. When the Glynn-Johnson door stop line merged with H.B. Ives it became the FS20. This door stop has been discontinued from Ives, but we have been able find a large stock. This Floor Mounted Door Stop also holds the door open, when in the latched position you can push the door and the holding latch will flip up and unlock thee holding clip. It is constructed of cast bronze or brass and then plated to your desired finish. This stop has a 2-1/2" long base that is 1-1/2" wide. The overall height is 3-1/8" with a 2-5/16" floor to rubber stop centerline. For use with door undercut up to 2-1/2".
GJF20- -
4" Kickdown Door Holder FS455
4" Kickdown Door Holder FS455
The H.B. Ives FS455 is what people think about when they say Kick Down Door Stop. This design has been around for almost 50 years and is try and true. Durable and ascetically pleasing to look at. This door holder features a simple hold and release, activated with a touch of the foot. They are constructed of cast brass or aluminum depending on the finish that you are looking for. The rubber tip is a non-marring and is corrugated on the bottom so it will not slide on the floor, and is easily replaceable, look under related products for the replacement shoe. This holder is for door to floor clearances of less than 2". This is an ideal door holder for the home, office, church or school.
Made by H.B. Ives
GJ44- -
Falcon 650233 24-R Center Case
Falcon 650233 / 650234 24-R Center Case
Replacement Center Case for the Monarch-Falcon 24-R Narrow Stile Rim Device. This Center Case is for use on both the Fire Rated and Non Fire Rated devices. This was changed in the summer of 2018. The 650233 has been replaced by the 650234, which was the Fire Rated version part number.
Falcon Part # 650233 / 650234
G24R15 -
Door Push Plate 60
The Door Push Plate 60 has the classic half round design. The plate measure 8" wide and 16" tall, and is constructed of 16 gauge metal, which is .050" thick. This plate is similar to the GPH59 (Push Plate 59), but is a 1/2" wider and 1" taller. This plate ships with the matching finish screws.
Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.
GPH60- -
Door Push Plate 61
The Door Push Plate 61 is constructed of 16 gauge stainless steel, aluminum, brass or bronze. This plate is handed left and right, the one shown on the website is a Left Hand plate. They measure 7-1/2" wide by 15" long, and ships with the matching finish mounting screws.
GPH61 -
Anodized Black Aluminum Door Kick Plate 315AN
The Anodized Black Aluminum Door Kick Plate 315AN are a flat black and match the black color we find on Storefront doors. These plates have an aluminum base metal, which is 18 gauge (.040") thick that is then Anodized in the Black Color. These plates relatively inexpensive. Custom sizes are available, they run about $0.25 per square inch.
You can order these plates with tape mounting, but on larger plates and especially plates with a stainless steel base metal, it is not recommended. Stainless Steel plates are too heavy and they most likely will not stick. We can also ship them with no holes, if you want to drill your own holes. This is fine on the Brass and Aluminum base metals, but again Stainless Steel is very hard and a drill press would be recommended. You can glue them on, I would recommend liquid nails, and come C Clamps with the door on saw horses.
GKP-BLK -
Von Duprin 88 Active Case 050409
The Von Duprin 88 Active Case 050409 is for use with the Rim Device, which is the model that has the latch bolt sticking out the side of the housing. This version of the housing is for use on the 88EO (Exit Only), 88DT (Dummy Trim) and 88NL (Night Latch) models only. Call or email if you need the Thumb Piece, Knob or Lever Version. The Center Case includes all of the internal workings.
Von Duprin Part # 050409
Old Part # 10166288R10- -
Doromatic Exit Device 2090 Active Case
The Doromatic Exit Device 2090 Active Case is for use on the 1090 and 2090 panic hardware. This device has been around since the early 1970's, and is now called the Falcon 2090 Active Case, but it is the same piece. Includes all of the interior hardware. Just unscrew or loosen the three set screws and remove your old case and install and tighten the three set screws. Housing measures 7-1/2" long by 1-3/16" wide, mounting studs have a 6-1/4" center to center distance.
LEFT HAND HOUSING SHOWN IN PICTURE
4270902740 Left Hand Aluminum Stock
4270902742 Left Hand Dark Brown Stock
4270902743 Left Hand Black * One week lead time
4270902746 Right Hand Aluminum Stock
4270902748 Right Hand Dark Brown Stock
4270902749 Right Hand Black * One week lead timeG209001 -
Door Push Plate 59
The Door Push Plate 59 has the classic half round design. The plate measure 7-1/2" wide and 15" tall, and is constructed of 16 gauge metal, which is .050" thick. This plate is similar to the GPH60 (Push Plate 59), but is a 1/2" more narrow and 1" shorter. This plate ships with the matching finish screws.
Aluminum and Stainless Steel ship in 1 week, all other finishes ship in 2 weeks. Made in the USA.
GPH59- -
Jackson Panic Device Center Case 1085/1095
The Jackson Panic Device Center Case 1085/1095 is for use with the 1085 devices for both and left, and the inactive case of the 1095. Case is easily removed by loosening the two 1/8" Allen screws and one on the bottom. Includes everything in the housing. The distance between the mounting studs on this Case is 6-5/16"
Jackson part # 30-982 Right Hand Body and Arm Assembly
Jackson part # 30-983 Left Hand Body and Arm AssemblyHousing Shown in Aluminum
G1085XX -
Von Duprin Panic Device 8827 Center Case 050415
The Von Duprin Panic Device 8827 Center Case 050415 is for use on the non fire rated 88 surface vertical rod. You can tell the difference by the dogging screw. If you have a Dogging Screw on your device, then this is the correct part. Includes the internal pieces, including the Rod Control.
Von Duprin part # 050415
88VR120-
