Search results for: 'latches+kits+for+bathroom+door'
- Did you mean
- latch kits for bathroom door 0
- latches kit for bathroom door 0
- latches kick for bathroom door 0
- Related search terms
- LATCHES+kits+for+bathroom+doors 70
-
Von Duprin 2227/3327A/9927 Top Latch 050400
Von Duprin 22, 33, and 9927 Top latch
This latch is used on the 2227, 3327A, and 9927 Surface Vertical Rod Devices. This latch is for use on devices shipped after October 1998. This is usually the problem if your bottom rod is dragging on the floor. Includes screws.
Von Duprin Part # 050400
G050400 -
Falcon Dor-o-Matic 1590 Latch Bolt Assembly 4270107603
Falcon Dor-o-Matic 1590 Latch Bolt Assembly 4270107603
Replacement Latch Bolt Assembly for the Falcon Dor-o-matic 1590. In the old days you could just replace the PB355 (SPRING.127) spring, but as of November 2015 you have to replace the complete latch head assembly.
Doromatic Part # 4270107603
Old Part # PB124GPB124 -
Bilco Barracuda DSI for In Swinging Doors
The Barracuda DSI is designed for In Swinging 36" Doors. The user places the deive on the floor and slides the metal plates under the door. Then pushing outward on the handles engages the plates to the exterior door jamb. Then you simply install the locking pin to barracade the door. The device is manufactured of heavy-duty steel that is then coated in a durable powder coat paint. It will work on just about any door and comes in 6 different versions depending on your jamb width. It is lightweight and comes with a storage mounting rack, along with all the the needed hardware for installation.
Barracuda Part Number
4-3/4" DSI-2
5-3/4" DSI-1
6-3/4" DSI-3
7-3/4" DSI-4
8-1/4" DSI-5
8-3/4" DIS-6DSI -
Finger Protector For Doors - Exterior Pull Side
Door Finger Protector - Exterior Pull Side
This model is specifically designed for exterior doors on the pull side of the door. This patented Finger-Gard product is designed for both exterior and interior doors and thus will operator in very cold and very hot tempetures. Flexible to minus 40 degrees. They are made of a special rubber that is resistant to harsh sunlight. They will allow the door to swing up to 180 degrees. This product is available in Brown or White, 78" or 83" lenghts
Our part # on this is GFG7 for the 78" length, and GFG7+ for the 83" length.
GFG-D -
Yale 7100F Series Latch Assy 60-7000-0425-048
Yale 7100F Series Latch Assembly
This Yale Latch Assembly is used on fire rated panic devices. A fire rated panic is a device were you can not lock the latch in the open position. It is used on doors were the engineers want the door to latch every time it closes to contain a fire.
Yale Part # 60-7000-0425-048
G6070000425048 -
-
Ives RL30 Roller Latch
Ives RL30 Roller Latch
The Ives Roller Latch RL30 is constructed of Forged Brass and Plated to your finish. Furnished with a Nylon Roller. Body measures 1" wide by 3-3/8" high by 1-11/16" deep. The roller has a maximum projection of 3/8" and is easily adjustable.
RL30- -
Ives RL32 Roller Latch
Ives RL32 Roller Latch
The Ives RL32 Roller Latch is constructed of Brass and Plated to your desired finish. The body measures 1-1/8" wide by 2-1/4" high and 2-1/4" deep. The roller is constructed of Nylon, and has an adjustable projection up to 1/2". Fits a standard heavy-duty cylindrical lock cutout.
RL32- -
Bilco Barracuda DSO for Out Swinging Doors
The Barracuda Model DSO is for Out Swinging 36" Doors and provides up to 550 pounds of security. It is constructed of heavy duty steel with a durable powder coated finish. The bar goes across the door frame and grabs the lever or knob set with an adjustable clamp. To secure the door, simply turn the handle until it is secured. They currently offer two models, one for jambs up to 5-3/4" and one for jambs greater than 5-3/4". This device ships with all of the hardware and a wall mounting rack for storage.
Barracuda Part # DSO-1 and DSO-2
DSO -
SEM7850-828 Armature for LCN Electro Magnetic Door Holder
SEM7850-828 Armature for LCN Electro Magnetic Door Holder features a metal die cast construction armature. The armature (door mount part) is 1-11/16" wide by 2-3/8" high with a 1-7/8" diameter. The armature projects out 2-5/8". Available in an aluminum or dark bronze color. Armature extensions are available, along with replacement covers, magnets, and armatures.
LCN Part # SEM7850-828
SEM7850-828- -
Von Duprin 2227 Top Latch 050091
The Von Duprin 2227 Top Latch 050091 latch is used on devices shipped before October 1998, see related products for the new style latch if your device is newer. This is usually the problem if your bottom rod is dragging on the floor. Latch measures: 1-1/16" wide x 4-5/16" long (less latch bolt) x 1-7/8" projection at the highest point. Includes screws.
Von Duprin Part # 050091
G22VR10 -
Corbin Russwin Door Closer DC3210
Corbin Russwin DC3210 Door Closer
The mid-priced, cost-effective choice for high-traffic situations. Corbin Russwin DC3000 Series Door Closers fulfill security and life safety requirements by ensuring reliable latching for access control and fire code compliance, along with ease of operation and precise adjustability for barrier-free code compliance. Ideal for virtually all door openings and draft conditions in both new construction and renovations.
Fits on the same mounting bracket as the 100, 110, 120, 2800, 2810 and 2820 Corbin Russwin Door Closers
Idea for interior doors.
DC3210- -
International Door Closer 852P Series
The International Door Closer 852P Series is common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 32” interior or 28” exterior doors.
3/4" x 7-3/8" mounting holes
852- -
Kickdown Door Holder Rubber Shoe For GJ1154M and GJL444-555
Rubber Shoe For GJ1154M and GJL444-555 Kickdown Door Stop / Holder
Replacement rubber shoe
5/8" insert diameter
1" base diameter
8-32 threaded screwGJ1154 -
International Door Closer 5530S SVR Device-Light Duty
International 5530S Surface Vertical Rod Device-Light Duty
All devices are non-handed design
Auxiliary guarded latch deadlocks latch bolt automtically locks when the door is closed
High shock-resistant latching mechanical design or protection from vandalism
All inside components are made of high rust-resistant alloy or heavy electroplated steelStandard 36”: Device length is 33 15/32” (850mm) for 3’ door use, with a standard push bar.
Long 48”: Device length is 44 3/4” (1137mm) for 4’ door use, with long push bar.Standard vertical rod accommodates 7’ or 8’ doors
We offer the aluminum and dark bronze finish online, the polished brass and stainless steel finishes are available.
5530S- -
Bilco Barracuda DSO-PB for Out Swinging Doors with Panic Devices
The Barracuda DSO-PB is for use on Out Swinging 36" Doors with Exit Devices. It is constructed of heavy duty steel with a durable powder coated finish. The bar goes across the door frame and grabs the mounting cleat with an adjustable clamp. To secure the door, simply turn the handle until it is secured. They currently offer two models, one for jambs up to 5-3/4" and one for jambs greater than 5-3/4". This device ships with all of the hardware and a wall mounting rack for storage.
DSO-PB -
International Door Closer 851P Series
The International Door Closer 851P Series is not a common closer we see on a lot of storefront aluminum framed doors. This is one of the last closers out there to still have sizing. By sizing I mean each door closer has a spring size of different tension so the closer is selected depending on door size and wether it is interior or exterior. These days we usually use this door closer as a replacement of existing doors. The closer features two adjustment valves for closing and latching speeds. The cylinder is constructed of precision cast aluminum. If you have an exterior door I would recommend the 880 Series, which is the same door closer, but has a back check valve. The back check valves will slow the door down if it is caught by a gust of wind. It ships with a regular arm and parallel arm bracket. This door closer is for use on doors up to 32” interior or 28” exterior doors. The 851 meets the size 1 ADA requirements.
3/4" x 6-3/8" mounting holes
851- -
Von Duprin 2227 Bottom Latch 050090
The Von Duprin 2227 Bottom Latch 050090 replaces and updates all 2227 bottom latches to the new style if you device was shipped before October 1998. If your device was shipped after October 1998 then use the G050401.
Includes screws and bracket
Von Duprin Part # 050090
G22VR120 -
Von Duprin 9927 Top Latch 050091
The Von Duprin 9927 Top Latch 050091 used on all the Von Duprin 9827 and 9927's. Replaces and updates all 9827 and 9927 bottom latches to the new style, if your device was installed before October 1998. If your device is newer then October 1998, then use the G050400. This is usually the problem if your bottom rod is dragging on the floor. Latch measures: 1-1/16" wide x 4-5/16" long (less latch bolt) x 1-7/8" projection at the highest point. Includes screws.
Von Duprin Part # 050091
G99VR10 -
Dor-o-Matic 1690/1990 Top Rod Latch Assembly PB130
The Dor-o-Matic 1690/1990 Top Rod Latch Assembly PB130 is also used on the 1390, 1490 and 2390. This latch has been around since the 1970's, and is usually the issue if your bottom rod is dragging on the floor. Although we are calling it Dor-o-Matic, it is actually known as a Falcon SU Top Latch due to a name change 5 or 6 years ago. This latch rolls over when the device is pressed in and then locks in that position. When the door closes, the 'U" channel of the latch flips over to a vertical postion and drops the rods. This latch always uses the PB48 Strike, our part # G199034. The Dor-o-Matic Panic Devices have been around since the late 1960’s, but have most recently been known as the Falcon Panic Device from a name change they had in about 2008. They are basically the same device, with the same parts, just a different name plate. Falcon part # PB130 or 4270101806.
G199025